サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy dlux 20A SBECブラシレススピードコントローラーデータロギング(2S〜4S)/ワット

Generating Links

Turnigy dlux 20A SBECブラシレススピードコントローラーデータロギング(2S〜4S)/ワット

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,971.50
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9192000026
送料無料したい? クリックする こちらへ 詳細情報を参照する

この軽量で汎用性の高いESCが6Sまで対応できるようにTurnigy®dlux SBECのESCはあまり、品質と性能に新たなベンチマークを設定していると+ 10Aは心の完全な平和と現在のバースト。大規模なプログラミングやデータロギング機能もめったにこの評価のESCに見られないアプリケーションの汎用性を提供します。すべてのTurnigy dluxのESCは、プログラミングカードを介して、または送信機によってプログラムすることができます。明確かつ理解しやすい命令が含まれています。

*今Turnigy dluxプログラミングボックスで使用した場合表示可能なデータロギングをフィーチャー。

データロギング表示パラメータ:
最大温度
環境温度
最大電流
最小電流
最大電圧
最小電圧
公称電圧
オフ電圧
モーターランタイム
時間の電源をオンにします
モーター極数
マックスモーターRPM
エラータイムズ

スペック。
マックス続き。電流:20A
マックスは現在のバースト:30Aを
最大BEC電流:2A
BEC電圧:5.5V
リポ:2〜4S
ニッケル水素:5〜12cells
重量:22グラム
最大RPM(2ポール):200,000rpm
サイズ:51のx 27のx 11ミリメートル
モータープラグ: 女性3.5ミリメートルの弾丸のコネクタ
バッテリーのプラグイン: なし

特徴。
極めて低い内部抵抗
非常に低い動作温度
過温度保護
APECのMOSFET(台湾)

プログラミングオプション。
バッテリタイプ:2S〜4S
フォワード/リバース
ソフトスタート
LV(ストップモーター、電力を削減、無視)タイプをカットオフ
LV設定をカット(0.1V刻みで2.5〜3.5V)
タイミング(オート、中、高)
スイッチング(8,16kHz)
工場の復元
アクティブRPMコントロール:オン/オフ(ガバナーモード)

デフォルトの工場出荷時の設定。
ブレーキ: オフ
バッテリー: リポ自動検出します
低電圧:3.2V(パワーダウンモータ)
タイミング: オート
周波数:8KHzの

注:プログラミングボックスが利用可能になりまし、以下の関連項目を確認してください。

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 19, 2015

SimonK Firmware aufspielbar!

Kevin Fairgrieve | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 18, 2015

Got this to go in my Radjet 800 (stock set up). It is just a shame that this ESC comes with such short wires.

SMPRC | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 20, 2013

Here's a late update to the previous review of the ESC:
Contacted HK CS to let them know the ESC wasn't working and they needed some "proof" of the failure. So I hooked all the electrical parts up and was getting ready to shoot a short video so the problem could be seen 'in action' as-it-were. Before I started the camera rolling the ESC started showing signs of life, the motor started spinning (under control of the servo tester) and then smoke and flames shot out of one end of the ESC. Whoops...
I forwarded photos (and a short video) of the damage and after a few more emails I received a full refund credit. I'm tempted to try another one but I'd like to read some success stories first.

SMPRC | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2013

Received my ESC last Tuesday (01/22/2013) and 5 days later had an opportunity to fire it up. First I connected it to my Turnigy Programming Box and even though the display on the box lit up, I couldn't get any setting info to show. Thinking maybe my box was too old and the firmware outdated, I went directly for a quick test with a 1450Kv motor, 3S Nanotech pack and my Hitec HFP-20 servo programmer (as a signal source). No beeps or any other signs of life came fourth from the 20A, dlux ESC. There was power present from the built-in SBEC but that's all. It's dead...

And what's with the conflicting specification regarding the number of series LiPo cells it can handle? Is the number 4 or is it 6? Somebody has to get this info consistent. It's rather critical!

Rolf | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 17, 2012

Good ESC, I only did the programming with the programming box.
Easy to set up, also the cut off temperature can be programmed in a range from 90-105.
Very fine throttle response over the complete range.
Maximum cut of setting available is 3.2V on the one I have.

I took this one because of the data logging when used with Turnigy dlux programming box. Good to have data for an easy controll of the setup. I would appreciate the amps measuring with .1 steps, not only 5A or 15A for example.
Displaying the logged data works fine on the box.

For getting rough data (min / max. values) to check that the drive setup is in the correct range its OK. For detailed data on competition models I still prefer the SM-Modellbau data logger.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2012

No special comments. Just a ESC but together with its programing box, a nice and reliable combo.

titane | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2012

Lger, il faut maintenant tester sa durabilit

hwang | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 23, 2012

very nice. .

顧客ファイル
Programming with Tx instruction Download [58]
Programming with Tx instruction Download [58]
Programming manual (instruction) Download [208]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!