Turnigy dluxプログラミングボックス/データロギング機能ワット

• Overall
• Quality
• Value

Perfect production to adresse DLUX mk1 ESC but ...

Nov 28, 2017

This box enabled me to configure my DLUX 70A ESC. It also enables to read the measurements indice the ESC. I do not know how to reset the measurement but I guess there is a way to do so.
I would like to buy DLUX 60A mk2 however it seems that the firmware id of those new mk2 are not recognised by the old firmware of this box.
If the firmware of the box can be updated to address new mk2 ESC, I will déclare the 5 stars for this box. By now I can "only" raise the 4 stars for this cheap box.

• Overall
• Quality
• Value

Good box for older ESC

Sep 28, 2017

This box does not communicate with new dlux ESC such as 60A HV. It is still perfectly adequate for older dlux data-logging dlux esc. There does not appear to be anyway of updating the firmware on this site.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 27, 2016

I purchased this box so that I can download new firmware to it so that I can then use it to program the OrangeRX micro flight stabilizers with new firmware. We will see how all of that works. Thus far, things have been going quite well !!!

• Overall
• Quality
• Value

Customer Rated

Mar 20, 2016

carte de programation INDISPENSABLE! pour tous les controleurs Dulux,ce qui facilite bien l'utilisation de ces derniers!!le tout un prix HK

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 19, 2016

Works a treat, does exactly what it says on the tin

• Overall
• Quality
• Value

Customer Rated

Jul 11, 2015

NO MANUAL INCLUDED WITH THIS ITEM. Spent a week trying to find out how to get my unit working. Accidentally found the answer. Make sure the escape is connected to the topmost point and the BEC power to the lower point. when facing the unit. Be sure you have the correct polarity (brown wire on top). Now this next part was found nowhere in the printing on the package. Trying all button combinations, I found that on my unit you have to push the 2nd and 3rd buttons at the same time to access the menu and to enter/change program options. IT CAN'T BE THAT HARD TO INCLUDE SOME BASIC INSTRUCTIONS WITH TURNIGY PRODUCTS.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 17, 2015

really good. but have to make sure you are using a speed controller that has the data logging function. i have both esc and this box works really well

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 22, 2015

not many functions but cheap and a must have

• Overall
• Quality
• Value

Customer Rated

Mar 24, 2015

Reasonable programmer - shame about the lack of ANY user guide!..... I've deducted a star all-round because of this...... If you're using this programmer with low volt Dlux ESCs with BEC then this is not a big deal. However I got this to program Dlux HV 250A & HV 160A ESCs - both are opto without BEC. .... Unlike many other BEC-less ESCs & their respective programmers, (including other Turnigy series such as K force), this Dlux series doesn't simply require a 5 / 6 volt supply applied to its "servo" connector - from RX battery connected to programmer's other socket or via a "Y" lead BUT ALSO requires the ESC to be connected to its HV (6S LiPo) battery supply. . Even after working this out - the programmer only seems to connect after the RX supply has been disconnected & re-connected from the ESC whilst the HV motor power remains connected?.... Then. when the programmer does connect there's no display change to indicate this you have to press the "down" button (none of the other buttons seems to respond at this stage) which initiates stepping through programming options - if a connection has been made then its plane sailing, if youll excuse the pun.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 24, 2015

a great companion for my esc, majes programming and reading telemetry a breeze.