サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy電気磁気ブレーキシステム66ミリメートル(2.5 ")ホイール(2PC)

Generating Links

Turnigy電気磁気ブレーキシステム66ミリメートル(2.5 ")ホイール(2PC)

価格:

Now save 節約 ¥5,395.68 ¥5,395.68

Special Price ¥2,467.75 ¥2,467.75

You save 節約 ¥5,395.68 ¥5,395.68

Was  ¥7,863.43

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
107000165
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy電気磁気ブレーキシステム66ミリメートル(2.5 ")ホイール(2PC) - Turnigy電気磁気ブレーキシステムは、ブレーキシステムが比例しているとの補助チャンネルが操作を介して制御され、適合するように分かかり、セットアップの簡単なプラグ&プレイユニットを提供しています、800ミリメートルあなたのTX上のスライダ/ロータリーノブを経由して。ユニットは、各車輪ユニットは、事前に組み立てられている。EDFのアプリケーションに最適です、〜40V、12Vから入力電圧範囲の広い範囲をオフに動作し、4ミリメートル車軸に取り付けられましたリードはまた、あなたは、単に供給された制御ユニットに差し込む意味あらかじめ取り付けられており、あなたが行ってもいいです!

仕様ホイール:
ホイール: 合金/ゴムタイヤ66ミリメートル/ 2.5 "
アクスル:4ミリメートル
リード長さ:800ミリメートル
重量:75グラム(各)

スペックコントローラ:
動作電圧:12V〜40V(3S〜10秒)
出力電圧:2A / 0V〜12V
寸法:55ミリメートルのx 7ミリメートルのx 26ミリメートル
重量:15グラム

  • Turnigy Electric Magnetic Brake System
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Frans | 確認済みの購入者

  • Overall
  • Quality
  • Value

Bad item delivered

Nov 13, 2018

I have ordered these wheels, to be used on my jettrainer.
After inspection it seemed that one of the tires was not completely round.
After a closer inspection it apeared that the rubber of the tire was completeley craked along the profile of it, verry bad rubber has been used for this one, verry bad product.
An other buyer mentioned this problem also.
No spare parts for this item to bee found on this site.
No value for money.

Sedat | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2015

It is nice brakes. They are really high quality products. Thats why they are that expensive. You can never disrupt these brakes. When I was modifying my axels and brake itself to engage system, I worked with hammer. And I hit the brakes with hammer and nothing bad happened. There wasn't any scratch. These brakes are overall good but their braking rate could be more changeable. If the magnets starts to pull the brakes, nothing can move the wheel than. But what I want is to brake more slightly and smoothly. Unfortunately it is not possible. I only can make hard brakes while landing or in taxi position and sometimes it can harm my plane.(My plane is 4o size glow engined propelled plane, not an edf)

flyrc4ahigh | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 14, 2015

I received these, Listed as Turnigy however it was DR Mad Thrust on the box and description sheet. I first noticed that the tread was not straight around the tire it was side to side. I went ahead and installed them and after I got everything wired up I spun the wheels by hand and one was completely out of round. It was to much work getting them on I was not going to remove them. Luckily the Jet did not hop up and down when it went down the runway. The tires are soft and maybe to soft cause the rubber was already scuffing off on just the test runs. Hope they have replacement tires.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 15, 2014

good side Wheel in hard rubber easy to program

MikeExtra300 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2014

The worst HK products I ever bought!!!
It did not work proparly during testing, so said myself not to use them after landing.
During maiden flight takeoff, 1 wheel blocked and my Full composite 12S F18 went beside the runway and was destroyed...
So be prepared that it could block even they are switched off!!!
Hope HK exchange this product!

Nurburgringer | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2014

I just received a set of these today, one of which will go on the rear strut of a 1.5M quad EDF X-Wing I'm building.
They are quite beefy at 75g each and the wheels have a moderate amount of "slop" on the axles (not what I consider too much though).
The tires are fairly firm and should hold up to a bunch of landings.
To test I programmed an orange RX to mix in down elevator with flap channel and hooked one wheel up to a 4S battery.
After a bit of fiddling with the travel, sub trim etc got the brake to activate more or less progressively (using the brightness of the red LED on the control unit to gauge the input voltage), so that at full down elev the brake is fully active at which point it it impressively powerful. There doesn't seem to be that much progressiveness i.e. at half voltage there is still very strong braking, so while not completely "on" or "off" you may have a hard time applying "just a bit" of brakes. :)
Will update review after I've put a few flights on them, so far happy!
cheers
Kurt
Texas

4stripes | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 22, 2013

The electric controller has failed on two of my sets. Once using 10S and the second on 9S. It has worked on 8S but I wouldn't trust it unless a lower cell count is used (I now run 3S). The steel axles have no bearing into the alloy hubs so these must be greased to prevent excessive wear but take care not to get lubricant onto the braking surfaces or they won't stop very well until they get cleaned with alcohol or solvent. They are somewhat proportional so that is a nice feature. The tires aren't perfectly round on all sets but if the wheel is taken apart the rubber can be re positioned better.
For the money, they are pretty good and will help stop those faster than expected landings on short pavement.

ravdigo | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 06, 2013

Ainda nao tive a chance de testa, comprei por curiosidade mesmo. Otimo acabamento.

jean-claude | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 10, 2013

I have a Grumania Typhoon with Lado retract . I order those wheel "brake" the size was good, probleme the jet is to heavy @ 18 Lb and the wheel will not turn at all ....good but only for light jet ~ 90 mm size

顧客ファイル
overview Download [92]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!