Turnigy FBL100メインモーター

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 03, 2014

Great motors, stick to these ones as they come with the connector. The other one hobby king sells with no connector and longer wires is terrible. I tried 3 of them and they were all unusable. 1 of them overheated and 2 of them barely had enough power to get the heli off the ground. These original FBL100 motors are great. They give you decent head speed and last a good amount of flights before they require replacement.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 15, 2014

Ersatzmotor, der Orginal eingebaute luft noch immer bestens.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 10, 2013

Working good for Mcpx

• Overall
• Quality
• Value

Customer Rated

Apr 15, 2013

Important note: Save your old MCPX motor. The plug on this motor DOES NOT fit the MCPX, so you'll need to unsolder the old lead from your dead motor and solder it onto this one. Not hard if you have good eyesight and fair soldering skills.

Once done, it woks great. Seems to have a bit more power than the stock MCPX motor. It's a bit longer than the stock motor, but that doesn't affect the fit at all.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 01, 2013

Price / quality ratio is very good I recommend Daniel!

• Overall
• Quality
• Value

Customer Rated

Mar 12, 2013

Ich habe den Motor in meinen mcpX eingebaut. In der Tat ist der Motor ein wenig hher wie der Originale aber das strt nicht weiter. Man muss nur einen 1,27 RM Stecker anlten fr die Platine. Der Motor ist etwas strker wie das Original und luft wesentlich besser an. Am besten fand ich aber das er wesentlich Vibationsrmer ist. Nur zu empfehlen. *****

• Overall
• Quality
• Value

Customer Rated

Feb 25, 2013

He cambiado mi motor original por este y funciona perfectamente. La instalacin es muy sencilla, tan solo dos pequeos tornillos y conectar a la placa, no hay que soldar nada. Excelente.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 10, 2013

Great spare parts for Blade MCPX

• Overall
• Quality
• Value

Customer Rated

Oct 16, 2012

A little bit longer than the mcpx motor. A little more power. If you want to stretch the durability just drill two holes in the plastic cap. Be careful that you will not damage the inside contacts. Better you dissemble a old one and check the positions. Than you have "access" to the inside of the motor. I recommend "Teslanol" Spray. Just flood the motor and clear it with compressed air. The motor will start earlier and last longer. Do it after every hour.