サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

TURNIGY K-フォース120A-HV OPTO V2 5-12SブラシレスESC

Generating Links

TURNIGY K-フォース120A-HV OPTO V2 5-12SブラシレスESC

価格:

Now save 節約 ¥0.00 ¥0.00

¥20,153.30
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9020000002
送料無料したい? クリックする こちらへ 詳細情報を参照する
Turnigy K-フォースシリーズは、通常、高速車ESCのために予約すべての新しい強力なマイクロプロセッサに基づいています。新しいCPUは超高速同期タイミング、鮮明なスロットルレスポンス、少ないバッテリ負荷と減少FETの熱の蓄積を意味します。
「HV」は、このモデルが12S Lipolyまで対応可能であることを示します。
仕様:
出力: 連続120Aは、10秒まで180Aをバースト。
入力電圧:5-12セルのリチウム電池または15-36セルNiMHバッテリ。
BEC: なし。
制御信号伝送: 光学的に結合システム。
マックス・スピード;
2ポール:210,000rpm
6ポール:70,000rpm
12ポール:35,000rpm
サイズ:88ミリメートル(L)* 55ミリメートル(W)* 15ミリメートル(H)。
重さ:125グラム。

特徴:
*今スパークサプレッサー付き
*高性能マイクロプロセッサ(24kHzの)は、モータのすべての種類と最も高い駆動効率で最高の互換性を引き出します。
最高の放熱効果を得るために*ワイドオープンヒートシンク設計。
*航空機やヘリコプターとの互換性が改善されたノーマル、ソフト、非常に-ソフトスタートモード、。
*滑らかで、迅速かつ正確なスロットルレスポンス。
*スロットル信号は、電磁干渉を回避するために光学的に結合されたシステムを介して転送さ。
*複数の保護機能:低電圧カットオフ保護/オーバーヒート保護/スロットル信号損失保護
*ヘリコプターのためのガバナーモード。
* ESCのファームウェアは、USBアダプタを介して更新することができます。
*のTx、プログラミングカードまたはPCのUSBポートを介してユーザー・プログラマブル。
*非「K-フォースの 'ESCのプログラミングカードには対応していません。
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

anton | 確認済みの購入者

  • Overall
  • Quality
  • Value

perfekter regler wie alle turnigy die ich seit jahren verwende

May 10, 2017

Perfekter Regler wie alle turnigy regler von 12 bis 120 A, die ich seit vielen jahren in Verwendung habe. Diesen Regler betreibe ich mit einem hacker A 60 16 l glider mit ca. 70 A wobei der Regler gerade mal handwarm wird. Auch die bremse funktioniert auf der höchsten Stufe bestens. Habe zuvor einen YEP 120 A probiert. Dieser ist trotz exakter Programmierung für diesen motor nach ca. 10 sec. abgebrannt (Flamme zwischen 2 der 3 motorkabel). Kann turnigy bestens empfehlen und von yep dringendst abraten.

Bret | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2016

purchased this ESC for use with a 10S setup drawing 105 amps. On fourth use the ESC stopped, made a loud pop and burst into flames causing significant damage to my jet. The ESC was being used well within its stated voltage and current limits. I have filed a request for return of the ESC to hobby king but even if it is approved it has caused several hundred dollars of damage to my jet. I would strongly recommend a different ESC

Pyae Phyoe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2016

if you are edf flyer and if you burned a lot of money for esc like me, this will be the solution. got experiences in many esc - YEP HV, hobbywing HV, ZTW HV and this gonna be the best. currently using this for stinger 90 8S setup and keep extra one for spare as it's always out of stock.

Chris | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 09, 2016

Great ESC, I have 2, both in 12S set-ups with Scorpion motors, drawing 60-85A. As with all electric installations YOU MUST MEASURE THE CURRENT the prop I was initially recommended drew way too many amps. As a rebadged Hobbywing ESC, will work with Hobbywing program box.

guldukat | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 15, 2015

I have 9 of these for mainly 3D planes. All running 12S. The throttle response is very fast - perfect for 3D planes.

Schorch | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 25, 2015

Got this for my HK-600 GT and it looks like it was a good decision. The spool-up is slow enough, and the governor seems to be stable. I`m using this ESC with my proven 8S 5000 mAh setup with 2x 4S. The anti-spark circuit works well. This ESC is like shooting on sparrows with huge cannons, my setup draws a maximum of 45 amps, but i don`t wanted a YEP ESC this time. Overall, i`m satisfied with this ESC.

Herb_ | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2014

Connected the K_Force 120A HV it to a Rotomax 1.20 outrunner, pulling ca. 80A on 9S with an 19x10 apc prop. Pwm 8kHz and advance 19 degrees. On the third flight the esc went up in flames.

Herb_ | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 14, 2014

Excellent quality, just added my fourth one, this time for my Kyosho Corsair 120. Make sure you get the program box for it, makes programming very easy. Made by Hobbywing.

naxos | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 20, 2013

Wonderful esc for the price! I use it in my edf with 8 cells, it pulls 110A and after each flight is barely warm. At first i was a little disappointed because when i connect the battery it doesn't emit 8 beeps (as per number of cells) but after, reading the manual, i discovered that those esc make a long beep that indicates 5s and normal beeps for any more cell, so in my case it emit one long beep and three short ones
thank you Hobbyking!

Anton | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 18, 2013

I can highly recommend this controller. I started 45 times this summer with this control and landed safely. I need the controller for the Rotomax engines, 1:40, 50cc, and next year, 2014, for SK3 F3A Competition Series 28 pole outrunner. With the programming card, Turnigy Multifunction LCD Program Box for Brushless ESC, it is very easy to set the controller to the motor. Thanks HK, so it makes it fun. Best regards.

  1. 1
  2. 2
顧客ファイル
User Manual Download [2507]
Manual Stick Programming Download [646]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!