サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

水冷とTurnigyマリン60A BEC防水スピードコントローラ

Generating Links

水冷とTurnigyマリン60A BEC防水スピードコントローラ

価格:

Now save 節約 ¥0.00 ¥0.00

¥7,245.76
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9020000032-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigyマリン防水スピードコントローラは、最新の技術が詰め込まとそこまで今日の市場で最高のいくつかの中でされています。これらのスピードコントローラは、これは電子機器がにテストされることが標準である、保護(保護等級)の最終的なIP67レベルに達しています。 IP定格上の6が、それは「完全にほこりから保護」されていることを意味IP定格上の7は、それが「15センチメートルと1メートルの間の浸漬に対する保護されていることを意味します。

Turnigyマリンスピードコントローラは、「銅バーヒート技術」水冷システム(排他的に特許取得)と極めて低い内部抵抗のMOSFETが供給されています。それぞれが特別に優れた始動、加速性能を備えたソフトウェアを設計しました高速ボートで使用する場合のターンから出てきたとき、彼らは「パンチ」の残高を持っています。防水オン/オフスイッチを使用すると、バッテリーは次にハッチを密閉接続できるように取り付けられている、ラジオは、その後、あなたが行く準備ができているときに切り替えることができます。

2走行モードは、どちらかだけを転送または転送すると、逆に選択することができます。以下の機能リストに示したようにスピードコントローラは、複数の保護を持っています。スピードコントローラの多くの機能のプログラミングは、簡単にあなたの送信機を使用して行われます。

特徴:
•特許取得済みの水冷システム
•優れた始動と加速性能
•「パンチ」のバッグは、ターンの外に加速時
•防水オン/オフスイッチを装備
•2の走行モードが(前方のみ、または転送およびリバース)を選択することができます
•送信機を介してプログラム
•プログラムモード:モードを実行して、LiPoly細胞数、低電圧カットオフ、タイミング
•過熱保護
•低電圧カットオフ保護
•信号損失保護

仕様:
電圧入力:2〜3 LiPoly細胞(4〜9ニッケル水素)
連続電流:60A
バースト電流:360A
BECタイプ: オン/オフスイッチ付リニア
BEC出力:6V @ 2A
モーターコネクタ:3.5ミリメートル
サーボリード:JRスタイル
サーボリードの長さ:250ミリメートル
水冷パイプ:2ミリメートルI / D〜4ミリメートルのO / D
外形寸法:60.5x38.5x25.6mm
重量:84グラム

ご注意:この速度コントローラは、バッテリコネクタに付属されていません。

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Dale from england | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great Product

Jul 06, 2018

I brought it for a 60cm catamaran project and it provides loads of punch, doesn't get hot, the water cooling is very efficient. I use it with 3s 30c 2200mah, which works wells. The heat sink is a very well made aluminum block and the waterproofing is very good, I have had no issues with mine.

Zooma | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good size for my NTN-600

Sep 11, 2017

I bought an NTN-600 fast boat that comes without a speed controller.
The suggested requirement for this boat is for a 50A speed controller so this 60A speed controller should be just right and a little on the "safe side".
The speed controller is very well built and looks good too so as soon as the boat arrives I will fit it and report back on its suitability and performance.

Danny | 確認済みの購入者

  • Overall
  • Quality
  • Value

60 Amp marine. Great

Jul 14, 2017

Great ESC, have 3 of them, small enough to fit in tight spaces. Like the fact of programming it to run 2s. Bought the Turnigy program card for "Marine" then downloaded the white face plate in file to select proper units on the card display. Keep in mind u must use the male prong on the esc to connect to your cable to program card. Not the fixed cable to the receiver.

Danny | 確認済みの購入者

  • Overall
  • Quality
  • Value

60 Amp marine. Great

Jul 14, 2017

Great ESC, have 3 of them, small enough to fit in tight spaces. Like the fact of programming it to run 2s. Bought the Turnigy program card for "Marine" then downloaded the white face plate in file to select proper units on the card display. Keep in mind u must use the male prong on the esc to connect to your cable to program card. Not the fixed cable to the receiver.

Nicolas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2016

Can be programmed with Hobbywing ESC Program Card.
Works fine with 2848SL 3900kv Brushless Inrunner in my FT009. It has turned into a dragster !

Peut être programmé avec la carte de programmation "Hobbywing ESC Program Card".

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 02, 2016

This ESC has all the funktions I expected! Especialls the reduced power for reverse and the soft lipo cutoff are very important for me! I use two of them in my Traxxas Villain Brushless.

Stephen | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 12, 2015

Very good and reliable ESC.

Programming is easy using a card or your transmitter, with clear instructions included. Reverse is available for boats that don't use flex drive shafts. You even get a small sheet of TURNIGY decals for detailing your vessel. I've only had one fail on me, but that was due to a cheap, defective brushless motor that took the ESC with it when the motor shorted out.

A great ESC for a not-bad price ($10 cheaper would be my preference).

xwing | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2015

tried this out on my dragon evo it worked a treat.
with throttle wide open the esc stayed cool will buy again

顧客ファイル
turnigy_marine_esc_manual.pdf Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!