New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

BLHeliでTurnigy Multistar 10A V2 ESCおよび2A LBEC 2-3S V

BLHeliでTurnigy Multistar 10A V2 ESCおよび2A LBEC 2-3S V

Now save save AU$0.00 AU$0.00

AU$12.81
ステータス:
在庫切れ!
SKU:
9351000057-0
WANT FREE SHIPPING? Click here to find out more!

MultiStarのESCは、幻想的な価格で高品質のスピードコントローラです!簡単なインストールと簡単なセットアップのために設計されたこれらのESCは、マルチローターの用途に使用した場合、優れた性能を提供するために証明されています。あなたはマルチローターに出始めとマルチ回転翼機で動作するようにテストされ、証明されているソリューションをインストールすることは容易を必要している場合、これらのスピードコントローラは、あなたがカバーしています。

任意のスロットル入力への迅速な、さわやかな、レスポンスを犠牲にすることなく、非常に滑らかな、まだリニアなスロットルレスポンスのためのこれらのV2 ESCの機能BLHeliソフトウェア、。

すべてのMultistarシリーズESCのESCの定格パワーハンドリングに適したインストールブレットコネクタが付属しています。これは、プラグを可能にし、単に適切なバッテリ供給スプリッタ(3,4または6 ESC)とMultistarモジュラーアクセサリーラインからモータリード拡張機能を追加することで、利便性を果たしています。単純な何だろうか?

カスタマイズ可能なファームウェアへの扉を開くことすべてMultistar ESCの機能ATMEGA MCU - V2 MultistarがBLheliソフトウェアプリインストールされていて、USBツールを使用するように傾斜しやすさのためのものBLHeliスイートGUIを介して設定および更新のために利用可能です。

あなたの次のマルチローターのプロジェクトに合わせて、はんだの無料マルチローターの電源ソリューションについては、以下の関連項目を参照してください。

特徴:
•BLHeliソフトウェア
•BLHeli GUIソフトウェアを介してUSBツールの更新と構成
•スムーズでリニアスロットル制御
•スロットル入力に対する高速応答
•アトメルMCU
•停止したモータ保護
•スロットル信号は保護を失います
•安全なパワーオン(スロットルロック)
•サポート480Hz +高リフレッシュレート(499hzまで)
•OneShot125サポート

仕様:
定電流:10A
入力電圧:2-3セルLipoly
BEC: はい(リニア)[dissableために中間線を削除]
BEC出力:5V / 2A
PWM:8キロヘルツ
最大RPM:2ポールブラシレスモーター用240,000rpm
PCBサイズ:22ミリメートルX 17ミリメートル
プラグを放電: 男性2ミリメートルブレットコネクタ
モータープラグ: 女性2ミリメートルブレットコネクタ
重量:11.4グラム

  • 単位 9351000057-0
  • Brand MultiStar
  • 容量(mAh ) -
  • 重量 22.0000
  • 長さ 60.00
  • Width 10.00
  • 高さ 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A fine ESC. Doesn't get too hot and provides me enough power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A fine ESC. Doesn't get too hot and provides me enough power.

Very light, very small, but its not 10A.
Gets pretty hot even under 5-7 amps in hover mode while cooled by props air flow.
I used them in my Trifecta, they power 1806 motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very light, very small, but its not 10A.
Gets pretty hot even under 5-7 amps in hover mode while cooled by props air flow.
I used them in my Trifecta, they power 1806 motors.

Love these esc. I kept going back to my loved afro esc but for the spidex a throw away quad this inexpensive but we'll performing esc is doing the trick.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love these esc. I kept going back to my loved afro esc but for the spidex a throw away quad this inexpensive but we'll performing esc is doing the trick.

Great ESC for the price. the V2s are a MUST have for a budget multirotor.

I've paired these with the DYS BE1806s and they work quite well once programmed. However, it is important to note that when using the USB programmer you must remove the power lead from the USB programmer to this specific ESC as these ESCs have their own power UBEC.

Additionally, it should be noted that when upgrading the UBEC firmware, you must disable demagnetic compensation completely to ensure you don't burn up your high KV motors. (This features is only available for v13 of the firmware for these ESCS)

So far these have provided cool, steady power to my DYS BE1806s, and calibration was as easy as pie.

My only problem is one of these ESCs (of 6) came faulty and fried the windings on two of my motors. However HK was quick to replace them without issue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESC for the price. the V2s are a MUST have for a budget multirotor.

I've paired these with the DYS BE1806s and they work quite well once programmed. However, it is important to note that when using the USB programmer you must remove the power lead from the USB programmer to this specific ESC as these ESCs have their own power UBEC.

Additionally, it should be noted that when upgrading the UBEC firmware, you must disable demagnetic compensation completely to ensure you don't burn up your high KV motors. (This features is only available for v13 of the firmware for these ESCS)

So far these have provided cool, steady power to my DYS BE1806s, and calibration was as easy as pie.

My only problem is one of these ESCs (of 6) came faulty and fried the windings on two of my motors. However HK was quick to replace them without issue.

Pretty good ESC's. I noticed people are burning these things out a lot. You can't use a high KV motor. Max I would run is the 1900KV on a 250 quad. A 2150kv baby beast would surely burn it out. It works well if you're only planning to use it for a light weight low powered quad with a 5" prop. A 6" prop would blow this ESC. Know the limits and you'll be happy. They are oddly shaped which makes me a bit awkward to mount, aside from that, no complaints. Great price for a decent entry level ESC. Needs calibration out of the box.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty good ESC's. I noticed people are burning these things out a lot. You can't use a high KV motor. Max I would run is the 1900KV on a 250 quad. A 2150kv baby beast would surely burn it out. It works well if you're only planning to use it for a light weight low powered quad with a 5" prop. A 6" prop would blow this ESC. Know the limits and you'll be happy. They are oddly shaped which makes me a bit awkward to mount, aside from that, no complaints. Great price for a decent entry level ESC. Needs calibration out of the box.

Small, silicon cable, work great with my motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small, silicon cable, work great with my motors.

No problems running these ESC with DYS 1806 2300kv motors. It's just a shame that the on-board capacitor makes these ESC a little thinker than usual. If you are looking to re-solder the wires onto the ESC, you need to be quite careful, the solder pads for the motors wires are not on the edge of the board, but in the middle (HW Skywalker style!)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No problems running these ESC with DYS 1806 2300kv motors. It's just a shame that the on-board capacitor makes these ESC a little thinker than usual. If you are looking to re-solder the wires onto the ESC, you need to be quite careful, the solder pads for the motors wires are not on the edge of the board, but in the middle (HW Skywalker style!)

The Bad:
1) One of 4 came dead. It was replaced by warranty, but god knows when it will arrive.
2) Cucumbercome hardware assembly.

The Good:
1) Works.
2) Starting with BLHeli (and BLHeliSuite) 12.2 this ESC is officially supported.

The Bottom:
One of working 3 was with different settings. So it has sense to check settings before use. Also keep in mind that you can only program it with BLHeliSuite or in programming mode with remote(not very handy). Also I was foolish to order only 4. You probably will need spare one anyway.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Bad:
1) One of 4 came dead. It was replaced by warranty, but god knows when it will arrive.
2) Cucumbercome hardware assembly.

The Good:
1) Works.
2) Starting with BLHeli (and BLHeliSuite) 12.2 this ESC is officially supported.

The Bottom:
One of working 3 was with different settings. So it has sense to check settings before use. Also keep in mind that you can only program it with BLHeliSuite or in programming mode with remote(not very handy). Also I was foolish to order only 4. You probably will need spare one anyway.

I haven't had these long enough to see what their longevity is, but on my recent Ghost FPV250 build, they work perfectly. They don't even get warm using the DYS BE18906-2300kv motors. Because of the clear frame of the Ghost FPV250, I removed the phlegm green shrink wrap, and replaced it with clear. Looks much nicer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I haven't had these long enough to see what their longevity is, but on my recent Ghost FPV250 build, they work perfectly. They don't even get warm using the DYS BE18906-2300kv motors. Because of the clear frame of the Ghost FPV250, I removed the phlegm green shrink wrap, and replaced it with clear. Looks much nicer.

Have had some go great and some burnt using a 2300kv quad motor. I would say for the money they are ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have had some go great and some burnt using a 2300kv quad motor. I would say for the money they are ok.

Customer files
Blheli atmel manual Download [172]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save