サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Multistar 20アンペアマルチローターブラシレスESC 2-4S(OPTO)

Generating Links

Turnigy Multistar 20アンペアマルチローターブラシレスESC 2-4S(OPTO)

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,485.32
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9351000007
送料無料したい? クリックする こちらへ 詳細情報を参照する

MultiStarのESCは、幻想的な価格で高品質のスピードコントローラされています!簡単なインストールと簡単なセットアップのために設計されたこれらのESCは、マルチローターの用途に使用した場合、優れた性能を提供するために証明されています。あなたは、テストの結果、これらのスピードコントローラは、あなたがカバーしているマルチ回転翼機で動作することが証明されたソリューションをインストールすることは容易にマルチローターの中で開始し、必要な場合。

これらのESCのは、任意のスロットル入力への迅速な、さわやかな、レスポンスを犠牲にすることなく、非常に滑らかまだリニアなスロットルレスポンスを提供しています。安全性はすべてMultistar Escキーの特色に調整可能なバッテリーLVC(LVCを無効にするLiXXにセットバッテリータイプ)、モータのストール(過負荷)保護、信号損失のシャットダウンと安全武装で忘れていません。

すべてのMultistarシリーズESCのESCの定格パワーハンドリングに適したインストールブレットコネクタが付属しています。これは、プラグを可能にし、単に適切なバッテリ供給スプリッタ(3,4または6 ESC)とMultistarモジュラーアクセサリーラインからモータリード拡張機能を追加することで、利便性を果たしています。単純な何だろうか?

すべてMultistar ESCの機能カスタマイズ可能なファームウェアへの扉を開くATMEGA MCU - ので、傾斜のためのもの!または代替的にプログラミングカードは、事前にフラッシュさソフトウェアとの迅速かつ簡単なセットアップのためにインストールしたソフトウェアを使用することができます。

あなたの次のマルチローターのプロジェクトに合わせて、はんだの無料マルチローターの電源ソリューションについては、以下の関連項目を参照してください。

詳細:
•スムーズでリニアスロットル制御
•スロットル入力に対する高速応答
•アトメルMCU
•停止したモータ保護
•スロットル信号は保護を失います
•安全なパワーオン(スロットルロック)
•サポート480Hz +高リフレッシュレート(499hzまで)
•プログラミングカードとの互換性

仕様:
定電流:20A
入力電圧:2-4細胞Lipoly
BEC: なし(OPTO)
PWM:8キロヘルツ
最大RPM:2極ブラシレスモーター用240,000rpm
PCBサイズ:41ミリメートルX 24ミリメートル
放電プラグ: 男性3.5ミリメートルブレットコネクタ
モータープラグ: 女性3.5ミリメートルブレットコネクタ
重量:25グラム

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 05, 2015

I used these on a custom hex I built and so far they are working flawless. Don't forget to pick up a UBEC as these won't power your board.

Evil Pusher | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 14, 2014

Cheap. Not as good, what it should be used for - BUT: If flashed with SimonKs firmware the run fine.

Azza1 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 09, 2014

This Multistar ESC is a nice product, nice price great name what more can I say

Fapricator | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 08, 2014

If you buy these, be prepared to buy a USBasp programmer and the Atmel adapter. The firmware is garbage. I paired these with the Multistar 2212 motors and a Naze32 Full on a TBS Discovery frame. This was a nightmare to control. I updated the Naze, re-sync'd motors, reset my remote, played with PID settings...nothing worked. I finally paid for the $20 Atmel programming cable and flashed these with SimonK firmware. Without any changes to other components, she now flies without issue.

Sure, these are cheap...but when you add up the addition of a programmer, specialized cable and time, you're better spending the money on higher quality ESCs.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 07, 2014

ottimi resc buoni per il naza L

Healkor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 24, 2014

I bought 4 unit of them for my quadcopter. They have nice price and they are very good quality.

It has long connection cable with gold connectors...

just plug and use

NumnutChriS | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 22, 2014

Works as stated, bought a couple for some multirotors. Remember to get the programming card and some UBEC or ESC with BEC if needed too.

BrushlessJoe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 08, 2014

Ready to use ESC. Work very well. Just need to calibrate throttle and everything is OK. They give you no problems and good response for normal flying. Although in little aggressive flying response is also super fast. I'm not superexpert so I have no ttried them at superaggressive flying. Nice ESC !!

Twimnox | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 26, 2014

great price for the hardware. recommended.

KD4KW | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 15, 2014

I'm running these on a quad. the hovering current is about 5 amps per esc.
I've ran 4 10 minute test hovers and the motors and battery stay cool but the esc is so hot it will take the skin off your finger. I am running hi timing. not sure that would make any difference. I am running four cells.
I will have to replace these as I believe the heat will kill them sooner or later...

  1. 1
  2. 2
  3. 3
顧客ファイル
No File Name Download [1449]
Wiring-One-BEC Download [33]
Wiring-One-BEC-R1 Download [33]
Wiring-One0BEC-R1 Download [45]
PINS FIRMWARE SIMONK Download [717]
No File Name Download [717]
best setting for multicopter Download [325]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!