New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

Turnigy Multistar 20A V2スリムBLHeliマルチローターブラシレスESC 2-6S

Turnigy Multistar 20A V2スリムBLHeliマルチローターブラシレスESC 2-6S

Discontinued Product

Please continue searching for a similar product.
重量:
30 g
SKU:
9351000061-0
WANT FREE SHIPPING? Click here to find out more!

MultiStarのESCは、幻想的な価格で高品質のスピードコントローラです!簡単なインストールと簡単なセットアップのために設計されたこれらのESCは、マルチローターの用途に使用した場合、優れた性能を提供するために証明されています。あなたはマルチローターに出始めとマルチ回転翼機で動作するようにテストされ、証明されているソリューションをインストールすることは容易を必要している場合、これらのスピードコントローラは、あなたがカバーしています。

任意のスロットル入力への迅速な、さわやかな、レスポンスを犠牲にすることなく、非常に滑らかな、まだリニアなスロットルレスポンスのためのこれらのV2 ESCの機能BLHeliソフトウェア、。

すべてのMultistarシリーズESCのESCの定格パワーハンドリングに適したインストールブレットコネクタが付属しています。これは、プラグを可能にし、単に適切なバッテリ供給スプリッタ(3,4または6 ESC)とMultistarモジュラーアクセサリーラインからモータリード拡張機能を追加することで、利便性を果たしています。単純な何だろうか?

カスタマイズ可能なファームウェアへの扉を開くことすべてMultistar ESCの機能ATMEGA MCU - V2 MultistarがBLheliソフトウェアプリインストールされていて、USBツールを使用するように傾斜しやすさのためのものBLHeliスイートGUIを介して設定および更新のために利用可能です。

あなたの次のマルチローターのプロジェクトに合わせて、はんだの無料マルチローターの電源ソリューションについては、以下の関連項目を参照してください。

特徴:
•BLHeliソフトウェア
•BLHeli GUIソフトウェアを介してUSBツールの更新と構成
•スムーズでリニアスロットル制御
•簡単なフレーム取り付け用のスリムなデザイン
•スロットル入力に対する高速応答
•アトメルMCU
•停止したモータ保護
•スロットル信号は保護を失います
•安全なパワーオン(スロットルロック)
•サポート480Hz +高リフレッシュレート(499hzまで)
•OneShot125サポート

仕様:
定電流:20A
入力電圧:2-6セルLipoly
BEC: はい(リニア)[無効にするには、中間線を削除]
BEC出力:5V / 3A
PWM:8キロヘルツ
最大RPM:2ポールブラシレスモーター用240,000rpm
PCBサイズ:62ミリメートルX 13ミ ​​リメートル
プラグを放電: 男性3ミリメートルブレットコネクタ
モータープラグ: 女性3ミリメートルブレットコネクタ
重量:20.3グラム

  • 単位 9351000061-0
  • Brand MultiStar
  • 容量(mAh ) -
  • 重量(g ) 30.00
  • 長さ 90.00
  • Width 10.00
  • 高さ 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

GREAT DEAL, WORK SUPER WELL AND ARE PERFECT SIZE FOR MY QUADCOPTER ARMS

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GREAT DEAL, WORK SUPER WELL AND ARE PERFECT SIZE FOR MY QUADCOPTER ARMS

Awesome little ESC. I use them on Flite Test airplanes, they are nice and light and the BEC works awesome. On the long side, but being so light outweighs that.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome little ESC. I use them on Flite Test airplanes, they are nice and light and the BEC works awesome. On the long side, but being so light outweighs that.

I use 4of these in my Hercules quadcopter with 2216 motors and 4s battery, mounted inside the arms.
They work perfectly and stay nearly cold. I will order some more of them for my next project.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use 4of these in my Hercules quadcopter with 2216 motors and 4s battery, mounted inside the arms.
They work perfectly and stay nearly cold. I will order some more of them for my next project.

I use 4 of them on a quadcopter, conncted through an APM and they work perfectly. However I have 2 more not working on a plane, connected to an Assan 2.4GHz V2 receiver (MPX Tx and Assan universal TxModule). They work using a servo tester but not on the receiver (nothing happens, like there is no signal). The Rx works OK with any other brand of ESC, so it is really a problem with the Multistar ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use 4 of them on a quadcopter, conncted through an APM and they work perfectly. However I have 2 more not working on a plane, connected to an Assan 2.4GHz V2 receiver (MPX Tx and Assan universal TxModule). They work using a servo tester but not on the receiver (nothing happens, like there is no signal). The Rx works OK with any other brand of ESC, so it is really a problem with the Multistar ESC.

I just bought 4 of these, 3 worked 1 failed. I have purchased many mulitstar esc's and have them on many of my multirotors. Till now I have been very pleased with this brand. I will continue to buy them because of price and performance, but there is a quality issue that needs to be addressed. In failing I mean the motor would not start, it tried for about 2 sec each time I initiated the mulitirotor, so I swapped motors because this was a brand new esc which didn't work so I switched to a plush esc and both motors tried will now work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just bought 4 of these, 3 worked 1 failed. I have purchased many mulitstar esc's and have them on many of my multirotors. Till now I have been very pleased with this brand. I will continue to buy them because of price and performance, but there is a quality issue that needs to be addressed. In failing I mean the motor would not start, it tried for about 2 sec each time I initiated the mulitirotor, so I swapped motors because this was a brand new esc which didn't work so I switched to a plush esc and both motors tried will now work.

cute little esc, still not small enough for trifecta tail tray, nonetheless the quality is good and it has bootloader so much easier to change firmware than stock esc which needs soldering or flashing tool.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cute little esc, still not small enough for trifecta tail tray, nonetheless the quality is good and it has bootloader so much easier to change firmware than stock esc which needs soldering or flashing tool.

no frail ESC, slim built is easy to install between arms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

no frail ESC, slim built is easy to install between arms.

Ordered these to fit inside 16mm arms (15mm inside), they fit perfectly.
Sadly the quality control is low, I ordered in total 5 Opto's and 3 with the BEC for my Hexa, and found 1 Opto and 1 with BEC to be faulty out the box. Strange issue with on as it was acting differently to the others and the other one just did not work out the box.
I'm not sure if this is relevant, but the two faulty ones I ordered about 3 weeks before the 6 working ones, i wanted to test them but they got stuck in the post so I ordered the 6 I needed. Maybe the new batch is now better?
Anyway, I had 6 working so I'm using them with MultiStar Elite 3508-268kv motors with 17x5.5 props and a 960 Hexa.
Upgraded firmware to BLHeli v14 and altered some settings to get my best results.
Closed Loop MUST be OFF as with Low Voltage Limiter.
Motor Gain at 1, the same with Startup Power.
Temp protection off, PWM Dither 7 and Low RPM Power Protect On.
Demag MUST be OFF.
For best results PWM Frequency / Damped MUST be set to "DAMPED LIGHT"
Motor Timing is best at Medium, Low pulls more power!.
Anything noted as MUST caused the motor to run slower or react to throttle changes strangely or slowly. Others were decided by current draw or best feel.
Any settings not included here either where not available in v14 or seemed unimportant.
Kev

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered these to fit inside 16mm arms (15mm inside), they fit perfectly.
Sadly the quality control is low, I ordered in total 5 Opto's and 3 with the BEC for my Hexa, and found 1 Opto and 1 with BEC to be faulty out the box. Strange issue with on as it was acting differently to the others and the other one just did not work out the box.
I'm not sure if this is relevant, but the two faulty ones I ordered about 3 weeks before the 6 working ones, i wanted to test them but they got stuck in the post so I ordered the 6 I needed. Maybe the new batch is now better?
Anyway, I had 6 working so I'm using them with MultiStar Elite 3508-268kv motors with 17x5.5 props and a 960 Hexa.
Upgraded firmware to BLHeli v14 and altered some settings to get my best results.
Closed Loop MUST be OFF as with Low Voltage Limiter.
Motor Gain at 1, the same with Startup Power.
Temp protection off, PWM Dither 7 and Low RPM Power Protect On.
Demag MUST be OFF.
For best results PWM Frequency / Damped MUST be set to "DAMPED LIGHT"
Motor Timing is best at Medium, Low pulls more power!.
Anything noted as MUST caused the motor to run slower or react to throttle changes strangely or slowly. Others were decided by current draw or best feel.
Any settings not included here either where not available in v14 or seemed unimportant.
Kev

This ESC working good with multistar 2216 motor and 4s battery.
Except one serious issue: here is how to reproduce it
1. connect the battery and wait for 10 min
2. after 10 minutes, your esc should begin to beep, then wait another 3 minutes
3. disconnect and reconnect your battery really fast

Then you have a very high chance to burn both your esc and your motor. I have burn two esc and two motor in the same way.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This ESC working good with multistar 2216 motor and 4s battery.
Except one serious issue: here is how to reproduce it
1. connect the battery and wait for 10 min
2. after 10 minutes, your esc should begin to beep, then wait another 3 minutes
3. disconnect and reconnect your battery really fast

Then you have a very high chance to burn both your esc and your motor. I have burn two esc and two motor in the same way.

great ESC... very small for tube install... configuration -> no problem with BLHeli Tool... flashing software is not necessary to use them... very low heat generation... exactly that i missed...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great ESC... very small for tube install... configuration -> no problem with BLHeli Tool... flashing software is not necessary to use them... very low heat generation... exactly that i missed...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save