新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

Turnigy Multistar 30アンペアマルチローターブラシレスESC 2-4S(OPTO)

Turnigy Multistar 30アンペアマルチローターブラシレスESC 2-4S(OPTO)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
44 g
SKU:
9351000008
商品概要

MultiStarのESCは、幻想的な価格で高品質のスピードコントローラされています!簡単なインストールと簡単なセットアップのために設計されたこれらのESCは、マルチローターの用途に使用した場合、優れた性能を提供するために証明されています。あなたは、テストの結果、これらのスピードコントローラは、あなたがカバーしているマルチ回転翼機で動作することが証明されたソリューションをインストールすることは容易にマルチローターの中で開始し、必要な場合。

これらのESCのは、任意のスロットル入力への迅速な、さわやかな、レスポンスを犠牲にすることなく、非常に滑らかまだリニアなスロットルレスポンスを提供しています。安全性はすべてMultistar Escキーの特色に調整可能なバッテリーLVC(LVCを無効にするLiXXにセットバッテリータイプ)、モータのストール(過負荷)保護、信号損失のシャットダウンと安全武装で忘れていません。

すべてのMultistarシリーズESCのESCの定格パワーハンドリングに適したインストールブレットコネクタが付属しています。これは、プラグを可能にし、単に適切なバッテリ供給スプリッタ(3,4または6 ESC)とMultistarモジュラーアクセサリーラインからモータリード拡張機能を追加することで、利便性を果たしています。単純な何だろうか?

すべてMultistar ESCの機能カスタマイズ可能なファームウェアへの扉を開くATMEGA MCU - ので、傾斜のためのもの!または代替的にプログラミングカードは、事前にフラッシュさソフトウェアとの迅速かつ簡単なセットアップのためにインストールしたソフトウェアを使用することができます。

あなたの次のマルチローターのプロジェクトに合わせて、はんだの無料マルチローターの電源ソリューションについては、以下の関連項目を参照してください。

詳細:
•スムーズでリニアスロットル制御
•スロットル入力に対する高速応答
•アトメルMCU
•停止したモータ保護
•スロットル信号は保護を失います
•安全なパワーオン(スロットルロック)
•サポート480Hz +高リフレッシュレート(499hzまで)
•プログラミングカードとの互換性

仕様:
定電流:30A
入力電圧:2-4細胞Lipoly
BEC: なし(OPTO)
PWM:8キロヘルツ
最大RPM:2極ブラシレスモーター用240,000rpm
PCBサイズ:41ミリメートルX 24ミリメートル
放電プラグ: 男性3.5ミリメートルブレットコネクタ
モータープラグ: 女性3.5ミリメートルブレットコネクタ
重量:32グラム

Product
Specifications

追加情報

  • 単位:
    9351000008
  • Brand:
    MultiStar
  • 重量(g )
    44.00
  • 長さ
    90.00
  • Width:
    25.00
  • 高さ:
    45.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
ESCs are OK!
They heat-up a bit at 15Amps, a bit jumpy at start but ok in overall. You just can't beat the price.
Their cooling can be improved greatly if the wrapping is taken off (carefully, don't short-out anything on them!) and the heat spreader is exposed directly to airflow or propwash.

Even better, stick them spreader-side on the booms if they are square aluminum type. (zip ties, some thermal grease, you know.. ) Everybody put's their ESCs with the heat spreader facing outwards even if they have metallic booms that could take the heat away fast.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use them in a 2.1Kg Quad. They work but 30A is quite overstated. You guys should write realistic numbers on your stuff.

Hovering current per ESC is 5-7A (Measured with accurate industrial clamp meter) and flying current up to 17A so they should handle is with ease but two of them get really hot.
No matter to which motor I hook them up, it's always the same two that get hot...

I really can't imagine this ESC to work at currents above 20A.

Ordered TurnigyPlush now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A great ESC, i have these on 2 of my multi-rotors and am very happy with them, they do not get too hot and are very smooth
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These ESCs are rated for 30Amps.... but it cannot handle more than 6 Amps.. all four of them over heads and shuts down randomly in 4 to 5 minutes of flying.. my quad crashed 3 times due this problem and third time into pieces... these escs are crap.. never again buy these ones....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Decent ESC... You likely want the programming cards as well though, since you can't configure much without it.

If you want ESCs for a multirotor, you are likely better off with AfroESC than with these. They might make a nice low cost option if you are willing to flash them yourself though... (The 40A ones have an all-NFET design, which should have better performance though)

I haven't flashed mine yet, stock firmware is OK...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
no need simonK firmware i think. it's very good with stock firmware but it needs little bit programming. on some frames (X650F) it doesn't fit esc mount and cables are too short
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought multistar esc for use with multirotor obviously. wondering if the f-20a/f-30a might be a better choice for the FETs, but currently these are pretty good. going to flash them with simonk.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC but not great, I tried them in a quad that I have SimonK controllers with a KK2 board and it took a lot of adjusting but didn't fly as well, but was better than a regular ESC.

These OPTO units don't seem to like being flashed with SimonK firmware, I flashed mine with the KDA file and smoke started coming out of my test motor, though I've seen people succeed with the BEC version, I may have had a dud but wasn't willing to try anymore.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i guess it is ok to use it as it is, but don't try to flash it with simonk firmware because they won't work smoothly. jerky movements and not reliable when flashed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
alle 4 gelieferten Regler nicht in Ordnung gewesen! Gleiche bei einem Kollegen. Hoffe das war nur eine schlechte Serie und es wird behoben.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。