サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy MultiStar 40A BLHeli-S Rev 16 ESC 2~4S V3 (Opto)

Generating Links

Turnigy MultiStar 40A BLHeli-S Rev 16 ESC 2~4S V3 (Opto)

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,035.96
出荷先:
  • USA
  • Global
購入済み
到着予定時刻: 着予定時刻はありません [ ? ]
現在の状況:
在庫切れ!
SKU:
9351000096-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy MultiStar BLHeli-S Rev 16 ESC's are the latest generation of speed controllers designed specifically for multirotors (drones). They are super simple to install and very easy to set up.



These ESC's have superior performance and utilize hardware generated motor PWM for smooth throttle response. Another feature of these ESC's is Oneshot125 which is a faster communication protocol between the flight controller and the ESC on your multirotor. It allows the flight controller to send commands to the motor quicker allowing faster acceleration, regenerative braking and active freewheeling. They also support Dshot600 without the requirement of any hardware modification. Dshot is a new communication protocol between the flight controller and the ESC and is a substitute for Oneshot and Multishot., Dshot stands for "Digital Shot".



The BLHeli-S Rev 16 40A has masses of programming parameters (see the list below) and can be programmed easily from your transmitter or using the MultiStar programming card. The ESC comes with battery leads (no connector) and control lead (with connector). Just solder on the motor leads. With its small lightweight design, these ESC's will have you racing faster without breaking the bank.

 

These ESCs can be flashed with the latest DShot150, DShot300 and Dshot 600 firmware without any hardware modification. Dshot is a new communication protocol between the flight controller and the ESC and is a substitute for Oneshot and Multishot., Dshot stands for "Digital Shot".



Features:
• Small and lightweight (only 9.6g)
• S code for superior performance
• Smooth and linear control
• Oneshot125 for rapid throttle response
• Regenerative braking
• Active freewheeling
• Beacon functionality
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Thermal protection



Programming Parameters:
• Startup power
• Commutation timing
• Demag compensation
• Rotation direction
• Beep strength
• Beacon strength
• Beacon delay
• Throttle range
• Thermal protection
• Low RPM power protection
• Brake
• LED control



Specs:
Constant Current: 40A
Input Voltage: 2~4S 7.4~16.8V)
BEC: None
Dimensions: 32 x 15 x 3mm
Weight: 9.6g

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Falcogeorge | 確認済みの購入者

  • Overall
  • Quality
  • Value

Lacks info,

Jan 17, 2021

Firstly, this ESC does what it’s supposed to. But if there’s one thing that annoys me is that most people seem to sell ESCs without the documentation required for programming. I find that annoying. HK are normally good at supplying info but this has no like to programming info.

Erwin | 確認済みの購入者

  • Overall
  • Quality
  • Value

14

Aug 03, 2019

Just tested 14 of them they performed very well

christophe | 確認済みの購入者

  • Overall
  • Quality
  • Value

ESC efficace

Jul 25, 2019

Montées et testées sur un racer avec des EMax RS en 4S, pas de souci pour l'instant, on verra au fil des crashs...

fg | 確認済みの購入者

  • Overall
  • Quality
  • Value

rugged and foolproof

May 24, 2019

survives crashes and shorts well. always comes back no programming. could use ability to turn off brake for aircraft freewheel.

Bo Roger | 確認済みの購入者

  • Overall
  • Quality
  • Value

Can take some punishment

Dec 03, 2018

Ive used these esc in several quads and a twinsu twin motor airplane, with some of the biggest and baddest high current quad motors on the market (2600kv viking and tmotor f80) with agressive props. Works really well and reliable as long as you calibrate them properly. In a plane, give full throttle and plug in the lipo, there will then be a series of beeps. After they stop, lower throttle to zero and there will be some more beeps. Unplug lipo after these last beeps finished and youre done.
Same procedure for quads. In beta/cleanflight go to motors tab. Tick enable motors and use master slider to give full throttle, then plug in the lipo. After the beeps are done, lower throttle to zero and unplug lipo after the lest beeps are done. Done!

Stuart | 確認済みの購入者

  • Overall
  • Quality
  • Value

Tiny Tiny 40A ESC

Nov 29, 2018

I actually put this in a 1/10th RC car and it worked really well after flashing with the BLHeli software to set it for forward and reverse. gets a little warm in the car. I didn't check the amps and the cooling is poor, but the ESC just keeps going!

顧客ファイル
turnigy-multistar-esc-manual.pdf Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!