Turnigy Multistar 6A V2 ESC付きBLHeliとOPTO 2-3S

• Overall
• Quality
• Value

Certified Buyer Rated

May 22, 2016

works great i am using them with 3s Multistar V-Spec 1304-3100KV 3x3x3 prop 5 packs in and it is still running cold

• Overall
• Quality
• Value

Customer Rated

Oct 02, 2015

I got 3 of these together with one of the LBEC versions for a shall 200 size multirotor. Really easy to flash (I updated to BLHeli 12.2 which works fine for me), fit really well and I love the size and weight for my build. Thanks to the soldering tabs instead of wires, I was able to hardsolder them to the frame PDB and saved weight on zipties even! Run cool, respond well... definitely on my list of good items!!

• Overall
• Quality
• Value

Customer Rated

Jan 31, 2015

A bit pricey but otherwise perfect for my micro projects.
It is easy to solder the pads. I usually desolder the plus, minus wires, leaving just the signal wire.
I am using exclusively these on my 150-sized diy quadcopters, with 3100kv brushless motors and 4" props.
AUW 111g wihout battery, 157g with 950mAh/2s, flight time 10 minutes with this config.
The fpv models are ~180g AUW, capable of making 720p video and having range of 300m and flight time of 10 minutes.
Soon I will buy more of thses again :-)

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 24, 2015

ESC extremely light (2g is true !). Running with 4x DYS 1306-2300KV BX and mounted on a Turnigy Micro-Quad. Quad weight is only 127g without battery. Get not hot after 5 minutes flight. Satisfied