Turnigyナノテクノロジー5000mAに5S 65〜130℃リポパック

• Overall
• Quality
• Value

Customer Rated

Sep 02, 2015

I use this in my 1/8th scale monster truggy. The power produced by this battery is very impressive, and the actual capacity is 5500 mAh when setting LVC to 3.5 V. When I first got it, it would unbalance somewhat during discharge, but after a bunch of cycles, discharge is pretty uniform. I probably have close to 100 cycles through this battery, and it still performs like new. Performance/cost ratio is unbeatable. I used to think that Gens Ace was the only way to go, but this battery totally changed my mind.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 27, 2015

pura potenza,dopo 10 cicli funziona alla grande

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 23, 2013

Just recived two of this baby.

Real dimensions 48x45x158mm

Weight 710g and 715g.

First one is well balance and in the secound one cell is 3,69v and rest of cells are about 3,80-3,82v.

• Overall
• Quality
• Value

Customer Rated

May 08, 2012

I purchased two of these for my HPI Vorza. They both run equally well and just fit into the battery tray without any need for modification. The power delivery seems consistent and only starts to tame down just before ESC cut-off which I have set to 3.2v per cell. I balance charge them every charge (1C or 2C) on a Hyperion 1420i Net3 and they run very cool and have never puffed. The only downside is they are bigger and heavier when compared to some of the competitors Lipos and the 10 gauge power wires are too thick which makes them a nightmare to solder onto deans connectors. 12GA would have been perfect. For those reasons they lose a point on my score however overall I recommend these as a reliable and high performing Lipo product.