Turnigy Park250ブラシレスアウトランナー1680kv

• Overall
• Quality
• Value

Perfect Replacement

Feb 24, 2020

Perfect replacement for another brand of motor I destroyed plenty of power to boot

• Overall
• Quality
• Value

Schaut gut aus

Dec 06, 2019

Langzeittest fehlt noch. Motor für die Halle

• Overall
• Quality
• Value

opt for the turnigy 2211

Sep 11, 2019

Opt for the turnigy 2211 if you can, this took forever to get, and the The grub screws fell out and were lost when I opened the box, and the mounting options are not very good for this.

• Overall
• Quality
• Value

Some thoughts on Park250

Dec 12, 2017

Overall a great little beast. Very good value for money. I broke the wire on one and successfully rewound it. I had to drop from 25 winds per pole to 20 (I was left with too much spare wire :) ), but it runs well now. Grub screws are a bit hard to access when the motor is mounted. Anyone knows the correct size? My caliper shows 2.5mm. Thanks!

• Overall
• Quality
• Value

Customer Rated

Aug 28, 2016

Very cute motor ;). We run 9x4.7 prop on 2cell, because with 7030 we didn't get the performance advertised (much less thrust, about 2.8-3A amp draw). With 9x4.7 we draw about 8 amps (rated max) and motor gets hot but not too hot. A small powerhouse at this weight!

• Overall
• Quality
• Value

Customer Rated

Jun 17, 2016

Have gone through three of these motors and had two of them fail with broken windings. Compared to other Turnigy motors, these are not so hot. Way too small to rewind.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 26, 2015

A great motor for my micro combat plane ! I use it with 2s batteries, 6A ESC and 6x5 prop.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 26, 2015

Great motor for a great price! Extreamly powerful and great for any park/indoor flyer! I highly reccomend this to anyone!

• Overall
• Quality
• Value

Customer Rated

Nov 05, 2014

I'm using it as a powerplant in a flying wing of my own design.

The wing is made of balsa :800mm of wingspan for 185g in the glider version. I've added a little fuse with nanotech 2s 950mah batteries and the park 250 kv1680 power system with a hk 10amps esc.

First setup for sunday fliers : using a 5.7 x 3 apc prop. Low speed / high torque setup. Keep the amps around 3.6 A allow you to fly WOT for more than 12 minutes. At the end the motor is not hot, neither the batteries. Allow 40mn flight in neutral weather conditions.

Second setup : as above, just replace the prop for a cam prop 5.2x5.2. Amps are increasing til 4.6A. Lots of fun with impressively high speed passing for such a small setup. Would evaluate the level flight around 80km/h. Allow to fly 10minutes WOT, and you can believe me, you're often WOT with this kind of fun settings !!! Motor is barely hot after the flight, but nothing abnormal...

In overall a good product !

Regards,

Damien

• Overall
• Quality
• Value

Customer Rated

Dec 12, 2013

Great little motor for my One Sheet Glider. Difficult to access the grub screws when the mount is placed on the firewall.