新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Turnigy Park300ブラシレスアウトランナー1380kv

Turnigy Park300ブラシレスアウトランナー1380kv

QTY:

Now save save AU$0.00 AU$0.00

AU$19.39
Stock:
重量:
73 g
SKU:
Park300-1380

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要
3D parkflyersのために信頼性の高い、クリーンな電力を提供するために設計されています。このブラシレスアウトランナーは、より多くの電力を提供し、その高い効率で、長い時間を実行します。
77ワットブラシレスアウトランナーで飛ぶように設計された飛行機のために特別に構築された高品質のモーター、。

スペック。
バッテリー:2〜3セル/7.4~11.1V
RPM:1380kv
最大電流:7A
無負荷電流ません:8V / 0.4A
電流容量:9A / 15秒
内部抵抗:0.33Ω
重量:(コネクタ含まず)24グラム
シャフトの直径:3ミリメートル
外形寸法:37x28mm

必須;
10A ESC
2S〜3Sリポ/ 6〜8セルのNi-MH /ニカド
6x5〜8x3.8プロップ
8〜12オンス(225グラム-340グラム)を計量スポーツや規模航空機に適しています。
Product
Specifications

追加情報

  • 単位:
    Park300-1380
  • Brand:
    Turnigy
  • 重量(g )
    73.00
  • 長さ
    65.00
  • Width:
    40.00
  • 高さ:
    40.00
  • KV ( RPM / V )
    1380.00
  • 最大電流( A )
    7.00
  • 電力( W ):
    77.00
  • 長さB ( mm)の:
    25.00
  • ことができます長さD (ミリメートル)
    9.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    24
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    37.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This thing is a vicious little crap: just try to change the axle ( one spare provided... great!) the screws are glued so is the axle! (what tool for the screws? I tought I had about all of them....).
I never had a chance to run the motor for I was so mad that I hammered the dmn thing to death to the garbage!

Pierre. Engineer.
Quality
Value
Overall
Quality
Value
Overall
I got this motor in a nice acrylic box which is basically useless. If HK invest packing cost into quality then we all can get better quality products. There was a label on the box saying 120W, but this is overrated, this motor can go safely upto 80 to 90W with 3S setup.
Quality
Value
Overall
Quality
Value
Overall
I had a really hard time finding a prop that would fit on the prop saver. The prop saver is integrated in to the motor bell and is not removable. Since I couldn't find a propeller to fit the prop saver, I ended up trying to push the shaft forward to use the screw on adapter that is included, and is really nicely machined. I disassembled the motor, took out the pins and screws and on the first very light tap on the shaft the bell housing cracked and deformed, ruining the motor. I really don't like the design of the integrated prop saver and having the prop shaft run in to your airplane.
Quality
Value
Overall
Quality
Value
Overall
Great little motor. plenty of power with a 8x4 propp on a foamy. Just to clarify - the axle CAN be pushed - BUT - you will need a vice, and the lockclamps are brittle and can break - and don't forget to remove the two screws that hold the shaft in place. Have done the procedure on two of these motors without problems. The only downside is that the shaft is fairly soft - and once bent will snap if you try to realign it - and there are no spares in EU warehouse. But still exellent varlue for money
Quality
Value
Overall
Quality
Value
Overall
This is an all around great motor. I use these motors on a quadcopter with an AUW of 620grams. The motors pull about 3.6A each at hover with plastic 8X4.8 props. The motors have an excellent amount of punch.

Be sure to check the motors carefully before using them. The motors use heat shrink tubing to protect the wires from rubbing against the housing. The heat shrink tubing on one motor was not properly shrunk and worked it's way out of the motor during flight.

Also be aware that there is no strain relief on the wires. Any vibrations on the wires will likely cause the wire to break at the windings. You must securely fasten the wires to prevent vibration. Apply some epoxy where the wires exit the motor housing or secure the wires close to the motor.
Quality
Value
Overall
Quality
Value
Overall
otimo motor forte e bom desenvoltura
Quality
Value
Overall
Quality
Value
Overall
The motor construction looks very good and this motor comes recommended by the Flitetest guys for their scratch built system. However I have two issues.
1. The prop saver boss is 5.5mm diameter which is not a common size for propeller adapters. Certainly none of the props I've bought from Hobbyking have come with one.
2. I pressed the shaft through so I could use the supplied collet adapter There's a video about how to do this using a vice. Don't do it with a hammer! The collet was machined so out of true it wobbles half a millimetre back and forth when you spin it.
Quality
Value
Overall
Quality
Value
Overall
I bought this to use on my tricopter, and after after a few flights everything works beautifully.
Quality
Value
Overall
Quality
Value
Overall
Nice motor, not only for multicopters, but also for homemade foamies.
It performs great on my nutball for example.

However, I fail to change the default alloy prop saver.
I can not move the prop shaft either.
Both of them seems to be sealed to the motor...
If someone has a solution...
Quality
Value
Overall
Quality
Value
Overall
I bought 4 of these motors to use on a small quadcopter but found that the propsaver is too large for any standard prop, as in the hole in the middle of the propeller is too small, also the screw provided didn't suit ANY metric or inch allen wrench.... so i had to spend more money buying philips head M2 screws... I didn't want to bore out all my props so i pushed the shafts through, note, this is a pain and i bent two of the 4, the shafts seem weak and the whole assembly despite using the most precise method i could, still managed to band the can so that not the shaft but the motor can is off center?!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。