サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Reaktorの2×300W 20Aのバランス充電器

Generating Links

Turnigy Reaktorの2×300W 20Aのバランス充電器

価格:

Now save 節約 ¥0.00 ¥0.00

¥20,546.97
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9466000003-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

コンパクトなケースデザインを持つこの新しいTurnigy Reaktorの2×300W 20Aのバランス充電器は本当に、その高出力、高電流であなたを吹き飛ばすだろうし、それは非常に効率的な高度な同期整流式昇降圧DC / DCコンバータシステムです。強力なマイクロプロセッサは、バッテリの化学的性質の異なる種類の設定を充電/放電の多数のタイプを処理します。その上で、それはまた、ケーキの上のアイシングのようなもので、モータ(ブラシ付き)ブレークインと泡カットドライブのような特別な機能モードが付属しています。内部温度が55度摂氏(131F)に達すると、それ自体を保護するために、Reaktorの内部の冷却ファンが自動的に開始され、出力電力は自動的に25%削減されます。温度が60度摂氏(140F)を超えると、サイクルが停止されます。

リチウム電池を充電しながらさらに安全性を高めるために、セル監視プログラムは、充電/放電時のセルごとの電圧、および処理時間を調べます。任意の個々のセルが過充電さ/放電さまたはプロセスが長時間になった表示された場合は、充電器が警報音を生成し、関連情報が点滅します。バランスタップ搭載したリチウム電池パックの電池パックの内部抵抗だけでなく、セル当たりの内部抵抗をチェックしてパックの健康状態を監視します。 Reaktorのも逆極性(入力または出力)の保護、低入力電圧、容量と時間のオーバーランを充電しています。 Reaktorのケースの側面に統合バランスポートは余分なバランスボードがあなたのテーブルを乱雑にするか、失うことのために必要がないことを意味します。

Turnigy Reaktorの2×300Wとの同梱は、今日の市場での電池の中で最も適した配線およびプラグを、充電の配列です。

特徴:
•2×300Wの高出力、高電流、高性能電力変換回路
90%以上に達することができ、出力変換効率•アドバンス同期バックブーストDC / DCコンバータ技術
•冷却ファンがスタート/内部温度および充電/放電電力に応じて自動的に停止し、過熱から充電器を保護します。
後で使用するために保存することができます10バッテリプロファイルの•便利なセット
アクティブモード、電流、電圧、総電荷(MAH)、および充電時間を含む豊富な情報を提供•2×16バックライト付き液晶画面
•様々な充電/放電設定やサイクルは、顧客の幅広いニーズを満たすために
•最大300Wユニークな回生放電能力に。
•放電プログラムを展開するユニークなリチウム電池。あなたは、外部容量の抵抗を接続すると、最大放電電力容量-600W(@ 30V / 20A)として使用することができます
•リチウム電池セルモニタが充電/放電中にセル当たりの電圧、処理時間を調べ
•電動モータテストモード実行中ために起毛電動モータ、テストモータパラメータと性能チェック公差等を使用することができます
•フォームカットドライブは、充電器は、ホットワイヤフォームカッターに便利な電源として動作します。
•バッテリの内部抵抗測定
•Reaktorの充電器は、逆極性の保護(入力または出力)、低入力電圧、バッテリ温度、容量と時間のオーバーランを充電しています。

仕様:

入力電圧範囲:10〜28.0VDC
充電電流範囲:1/2 0.05〜20.0Aチャンネル
放電電流範囲:1/2 0.05〜20.0A チャンネル
最大充電電力容量:300W @入力電圧> 18V(チャネル当たり)
最大放電電力容量:20W
最大回生放電電力容量:300W
最大外部放電電源容量:500Wする@ 25V / 20A
分散のための電流ドレイン:<350ミリアンペア
バランスの精度:<10mVの
リチウム(リポ/リロ/ライフ)電池セル数:1〜6シリーズ(非バランスモードでは、ライフセル数は8Sに拡張することができます)
ニッカド/ニッケル水素電池セル数:1〜17シリーズ
鉛電池セル数:1〜12series(2〜24V)
バッテリーのセットアップメモリ:10
重さ:820グラム
外形寸法:152x170x60mm

含まれるもの:
Turnigy Reaktorの2×300W 20Aのバランス充電器
4ミリメートル金メッキプラグ付DC入力線
ワニ口クリップ付きワイヤー
リードを充電

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Erwin | 確認済みの購入者

  • Overall
  • Quality
  • Value

After 2 years of use

Apr 23, 2019

Did it's job perfect untill the upper charger stopped working (after 2 years) Never abused it, always used it for 4s 5" FPV racers on 2-3 Amp charging... shame, would never buy it again

Daniel | 確認済みの購入者

  • Overall
  • Quality
  • Value

Balanced Perfection

Mar 15, 2017

I have had LiPo batteries to run a custom e-bike for some time and the batteries were getting in the 50+ mv out of balance area. I recently purchased new batteries thinking that the batteries I had were getting old. It didn't take long to figure out that it was my old chargers. I bought two of these so I can charge four packs at a time. They both balance the packs to within 10mv. Couldn't be happier. I have even recovered some older packs that I thought were long gone using the available pre-charge function. I will never again buy anything than a genuine Turnigy charger.

Dirt Rider | 確認済みの購入者

  • Overall
  • Quality
  • Value

An excellent charger

Nov 23, 2016

I just got this charger f0or 6S 2200 and 3S 2200 mAH LiPos and have used it 1x. It is great. I noted cell voltages are within about 20 mV during Balance Charge well before the cells are full. It is quick and charges right up to the end at a relatively high current. I have another charger that really has a poor algorithm (or is failed) and drops charge current to near zero as it approaches full. I can charge 3 batteries on this new charger in the time the other takes. This is a winner.

Marcus | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very effective and high quality

Nov 10, 2016

I was very pleasantly surprised at the high quality of the build, it's a very sturdy unit and tough. I use it connected to a power supply at home but when I take it out to the track I use a large capacity 4S Lipo as a power supply, with that I can execute high current charge and regenerative discharge of my 5000 2S race packs. I do wish it did LiHv Lipos but even so, it's a great charger and I have recommended it to friends.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 21, 2016

This charger works really well for high powered setups, i charge 2 ea 6s ,10000mah and the balance tabs plug right in

samsman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2016

I like this charger a lot. I've had it for a year and a half now. No problem whatsoever! The cell max voltage is adjustable to 4.30V in custom settings. I just wish it was 4.35V so that I can use it with LiHV batteries. Just wondering if there's a way to update the firmware...

Stisse | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 20, 2016

Love this charger, been using if for a year now and still going strong.
It´s powered by a 24v 62 Amp DC 1500w Power Supply. Also have the ability to connected 2 Parallel charging Board for 6 packs 2~6S from Hobbyking. With that setup I can charge 12 lipos at same time if needed. I have 6 lipo´s each (6*3S 1300mah and 6*4S2200mah) for my 2 different size Quads that I mostly fly and hardly any downtime if I need to head out fast. PS I don´t always para charge, only when in a real hurry, usually plan my days and charge them 1 at the time the night before I know I´m going out for a spinn.

G2loq | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2016

I just received this charger. I plugued it on my 24Volts 1200W Turnigy Power Supply with the good polarity. And I heard a "pop" sound with flamme and fume. I unplugued it immediatly... But there were lot of fume (like condensator bad smell) all in my house. I think this is very good charger but I got a bad one :(
I already have the 4 charger version and I never had problem with it. Just with this one :(

John Doecliff | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 21, 2016

I upgraded to a 6S battery and a large multirotor so I needed a charger that would handle the higher current requirements for charging. I could not be happier with my choice. This charger does everything I want it to do and more. It remembers your last function and if you need to do a different function it is easy to program. So far I have charged a few different types of battery's and used the storage charge feature and the internal resistance feature as well. If your on the fence about this dont worry its a great charger.

xXInfernoXx | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 15, 2015

It is a good charger . basicly 2 300w chargers in one case but it has no usb port and no semp sensor port. next time i would buy 2 300w turnigy reaktors chargers

  1. 1
  2. 2
顧客ファイル
Menu Flow Chart Download [1191]
Screen Flow Chart Download [1191]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!