新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

TURNIGY Sentilon100A HV 5-12S BESC(Ver4)

TURNIGY Sentilon100A HV 5-12S BESC(Ver4)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
212 g
SKU:
TR_S100A-HV
商品概要
TURNIGY Sentilon 100A HV 5-12Sスピードコントローラー(バージョン4)
Sentilon 100A HVが直列に12 lipoly細胞を処理することができ、36 NiMHセルのthats!
このBESCは、米国への高電圧能力が使用フェアチャイルドのMOSFETと高品質のcompnentryをインポート負っています。
今、超高速12MHzのCPUと。いくつかの大型モータと同期の損失を防止サイクリング速いクロック*
12ヶ月の保証、SentilonシリーズBESCsは、障害のある製造および品質不良部品に対して保証されています。

続き電流:100A
バースト電流:110A
BECモード:N / A(なしBEC)
リポ細胞:5-12
ニッケル水素:15-36
重さ:125グラム
サイズ:60x60x11mm
CPUクロック速度:12MHzの
警告 :一部の大型モータの場合は、あなたが「高」のタイミングモードを使用する必要があります。これを怠ると、焦げたESCになります。

両方のコントローラとオプションのプログラミングカードを介してユーザプログラマブルな、。プログラミングカード、それが即座にユーザに現在の設定を指示し、ボタンを数回クリックするだけで、ユーザーが設定を変更し、その変更のグラフ​​ィカルな安心を持つことができるような優れたアイテムです。
プログラミングカードは、優れたアイテムと使用するのは簡単です!
ESCのCPUは、モータとの同期を継続するに十分迅速に3接続を制御できない場合*同期の損失が発生します。 ESCはモーターの極とタイミングを取り戻し、同期にフォールバックできるようになるまで、多くの場合、きしまノイズとして説明し、同期損失は、電力の突然の損失が発生します。この現象は、ESCの故障、ESC、モーター、細胞の数とプロペラ速度ではなく、非互換性はないが、通常は、これまで非常に大きなモーターを上に発生します。
TURNIGY 100A Sentilonは現在、12MHzのCPUの、市場で最速を実行します!モータやスロットルの動きのsnappiestの最速と完全に同期を確保!
Product
Specifications

追加情報

  • 単位:
    TR_S100A-HV
  • Brand:
    いいえ
  • 容量(mAh )
    いいえ
  • 重量(g )
    212.00
  • 長さ:
    182.00
  • Width:
    20.00
  • 高さ
    145.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to set up using the programming card. I am using an 8 cel set up with a 325KV motor - 17x12 APC prop. Over 20 runs with no problems. The only problem I am having is trying to program a throttle curve on a Futaba 8uaps Tx to give more power lower down the curve. When the Tx mix is activated it goes to full power at 25pcnt throttle. Any thoughts? Hence only three points for quality, but good value overall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
exelent controleur quipe mon f3a il est coupl avec un xpower f3a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Upgrade info I received from HK:
The ESC that you received seems to be upgraded version with same specifications, however it comes with antispark (the red lead has special anti spark resistor in it) and the capacitor set that you named as battery is designed to remove ripple current going from the ESC to receiver, added, third capacitor increases motor running smoothness, run the ESC and enjoy!

I used the programming card to set for 8s voltage cut off. The ESC works well (EF Power 90, turning an APC17x10 for Pattern use). After 8 ground runs it delivers a smooth power response and no overheating.
The only negative I would note would be that this ESC it is not compatible with my Futaba 8UAPS Tx throttle curve mixing, or reverse setting. Better to use the throttle exponential option to set the power curve. Otherwise, I would say good value for $.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect... cheap, and does a wonderful job on a rotomax 50cc-electric replacement :-).
there is only one downside to it, that is the manual, that doesn't clearly indicate how to program it... It was a hell of a job to enter the program-mode with a orange-rx...
So I switched over to 35mhz to program it. Afterwards I've found the 2.4ghz-trick, branching the cable to channel 1 -30seconds after adding the battery to the receiver did the trick(with full throttle at transmitter of course)... Seems like 2.4 needs some additional time :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this ESC to a Turnigy Rotomax 1.60 .. while programming it in high timing mode ... during the first test at home .. stopped and caught fire ... they are a waste of money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo
Das ist mein 8er Regler von Turnigy, und bin mal wieder sehr Zufrieden Prei-Leistung findet man kaum was besseres.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
mal producto, se me quemo al mes de usarlo, estoy intentando ver sim me lo reconocen por la garantia no se que va a pasar!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased this unit from a friend who had a valid order number from HK. Brand new out of the sealed package and would not arm.....not matter what configuration. Contacted warranty and they would do nothing because it was more than a year, regardless of all the problems HK has had with this unit, even the chip had the ID grinded off to conceal its origin!. Defective product. Would never purchase another one again. Great pricing.....horrible customer service!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good ESC

Using it on an electric scooter. 8s 16A/H battery pack. Made a modification to the heat sink though. I know this probably wont help any helicopter guys (or maybe it will). Attached a bigger heat sink with a cooling fan. After multiple full throttle blasts, ESC just slightly warm to the touch

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
would like to advise all those who buy this particular esc
chrisimopioisoun not never, ever the governor has done tests by highly experienced technicians and here in Greece.
With the governor's vbar works fine.

I challenge everyone to try, not only for this esc but for the 120HV OPTO
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
user_manual download now [2313kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。