サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

TurnigyタロンHexcopter(V1.0)カーボンファイバーフレーム - 625ミリメートル

Generating Links

TurnigyタロンHexcopter(V1.0)カーボンファイバーフレーム - 625ミリメートル

価格:

Now save 節約 ¥10,759.28 ¥10,759.28

Special Price ¥4,854.83 ¥4,854.83

You save 節約 ¥10,759.28 ¥10,759.28

Was  ¥15,614.11

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9171000060
送料無料したい? クリックする こちらへ 詳細情報を参照する

TurnigyタロンV1.0 Hexcopterフレームは偉大なルックスとパフォーマンスの両方を提供する高品質の本物のカーボンファイバーから作られ。当社のエンジニアは、いくつかの材料を試験した、妥協のないHexcopterフレームを作成するために着手し、彼らは唯一の本物のカーボンファイバーは、我々が達成するために設定した目標を達成することが決定されるまで拒否されました。すべての成分を秤量し、まだ非常に剛性のフレームを軽量化を実現することができる単なるグラムシェービング測定しました。私たちはどんな妥協を許さなかったとどちらを使うべきです。

六角設定の追加リフト容量は、このようなカメラシステムやその他の電子部品などのより大きなペイロードを運ぶため、このフレームに最適です。このため、優れたカメラリグまたは単に曲芸飛行のために非常に機敏かつ強力なマルチロータフレームのためになります!

タロンHexcopterは絶大な人気タロンV2クワッドローターフレームで使用されているものと同じ高品質のコンポーネントから構成されていますが、六角形状で使用するためのメインフレームを再設計しました。

タロンV2の開発中に私たちのチームはすでに人気のタロン枠を取って、デザインを学び、マルチローターのコミュニティからのフィードバックと私たち自身のアイデア28と35の上部または下部の取り付けを可能に私たちは再設計されたモータ取付板に基づきますサイズブラシレスアウトランナーモーター(異なる取り付けオプションの参照のための写真を参照してください)​​。当社のエンジニアは完璧な強度と軽量化の組み合わせが達成されたことに満足したまで改善されたクランプシステムは、単独の3再設計を行いました。センターフレームクランプシステムは、ほぼ各ブームに強いブレースを確保するために、サイズが2倍になりました。このフレームのあらゆる側面を徹底的に調べ、スルー考えられていました。

細部へのすべてのこの注意はタロンHexcopter、我々はあなたが所有することになりますように背後にある私たちの名前を入れてとして誇りに思ってい六角フレームでエレガントなシンプルになりました。

我々はまた、このようなマルチローター制御ボード、ESC、モーター、より多くのような品質のマルチローターエレクトロニクスのフルラインを提供していますので、どちらかあなたの電子機器のセットアップで妥協する必要はありません!

仕様:
重量:440グラム(ワット/アウトエレクトロニクス)
:625ミリメートル
モーターボルト穴16/19/25ミリメートル

必要なもの:
28-XXまたは35-XXブラシレスアウトランナーモーター×6
18〜25AブラシレスESC×6
8×4〜10x4.7プロペラ×6(3標準/ 3逆回転)
マルチローター制御基板
2500〜3300mAh 11.1V lipoly
4CHトランスミッター&レシーバー

  • Turnigy Talon Hexcopter Frame
  • Talon Hexacoter
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

eperret | 確認済みの購入者

  • Overall
  • Quality
  • Value

carbon & steel

Dec 25, 2019

carbon fiber is too thin to handle moderate crash but is handle power well, steel is to big and heavy.

Anglian | 確認済みの購入者

  • Overall
  • Quality
  • Value

Excellent value for money

Dec 19, 2019

This kit cost less than the price to buy the 6 CF arms. It assembled fairly easily with just a small amount of filing to get a snug fit of the motor mounts to the arms. Also, a copter of this size is most likely to be used with a camera gimbal, in which case it would require much longer landing legs than are included, (8 cms long), and would provide a more central mounting point for legs.
However , in summary it is an excellent starter kit for a larger format hexacopter.

rico | 確認済みの購入者

  • Overall
  • Quality
  • Value

Fixation review

Sep 15, 2019

tube lock is tricky, reverse screwing 2 turns on a 1mm plate (to be found by yourself) to increass diametere enough so tube can fit.

Zsolt | 確認済みの購入者

  • Overall
  • Quality
  • Value

No brainer

Dec 14, 2018

Bought 2 pieces on sale. The plan is to make a XY8 configuration (basically a hexa with two missing arms), using double arms. Even so, it must be lightweight for an octocopter!

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 07, 2016

Looks very good quality and sturdy but I haven't built it yet.

Mohammad Salah | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2016

Good quality carbon fiber and very lightweight. There is no assembly instruction inside the pack (or may be i have not received it). BTW, I test it with 920 KV motor with 8045 prop. I have enjoyed my first Hex-copter flight without any damage.I forgot to said that, i used CC3D flight controller and multistar bheli 20A ESC. some headless nuts are missing which are important, i used hot glue for this purpose.

Thanks Hk

E Philip Charlebois | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 06, 2014

Good frame, don't forget to thread lock the screws. Only complaint I have there isn't any room on the frame to mount anything. I manged to squeeze a gopro on the top, and put the esc on the arms, but it looks bad. I fit the battery underneath, but now I can't put a gimbal on it. Anyway, overall it's a solid frame, but I'd look at a tarot 610 or something instead.

Sportsvee | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 07, 2014

I have been using this frame for about 6 months now and I am VERY happy with it. It is my first 'non-toy' size frame and it has served me well. It does however have some limiting factors so I will list the pros and cons as I see them.
Pros:
Very nice looking clean frame. Happy with the build quality and its looks. It's goes together easily and the flight characteristics are stable and balanced. Kit was complete with nothing missing/damaged/other. Booms were the same length and straight.
Cons:
A screw hole on 1 motor mount threaded when tightening to a boom. So I have put longer screws and nuts on all. I highly recommend doing this to ALL motor mounts where it meets the boom. No issues after that. Space - you run out of it. The gap between the top and bottom plate is only enough for wiring basically and I have since added some extra surfaces to mount the FPV gear.
Tips:
Longer screws and bolts on the motor mount plates where it secures to the boom. Lock-tight all screws. TAKE YOUR TIME putting it together and read the instructions. It is easy to put together but do it once and do it right. Protect the surface that you are building on, the landing gear will scratch it.

I would recommend this frame to anyone looking for a first one to learn on, but you will outgrow it. Saying that, I am awaiting a FPV250 frame which is much smaller and I will keep this as my mid-size frame.
Hope

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 26, 2014

This is a great looking kit. Don't be thrown off by the small box. The only thing that would make this better would be a larger diameter main hub. It's really small, so fitting anything other than the flight controller on there is difficult.

Doobieman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2014

If you want FPV or a camera, buy the Tarot 680 kit. There's too much missing here to recommend it.

  1. 1
  2. 2
  3. 3
  4. 4
顧客ファイル
No File Name Download [457]
Turnigy Hex w/crab gear Download [2241]
No File Name Download [108]
No File Name Download [93]
talon con gimbal Download [565]
esc Download [119]
connessioni interne Download [127]
Talon and naza Download [590]
ESC support (under the frame) Download [70]
My new exa Download [175]
  1. 1
  2. 2
  3. 3
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー