サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ターニッジーTR-55 55CCガスエンジン5.6HP

Generating Links

ターニッジーTR-55 55CCガスエンジン5.6HP

価格:

Now save 節約 ¥0.00 ¥0.00

¥41,084.05
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9477000002-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

ターニッジーTR-55エンジンは、5.6HPパンチを搭載し、すべて機械加工されたビレット合金クランク、高出力リードバルブ、および高トルク用のポーティングを備えています。 機械加工されたビレットアルミニウムケースは、強力で軽量であり、出力と組み合わされて、TR-55を50-55CCクラスの3Dおよび曲技飛行の飛行機に最適にします。 TR-55は通常のポンプガスで動作するため、運用コストが低く、ファンファクターが高くなります。


特徴:
•砂型鋳造シリンダーヘッド付きビレットアルミニウムケース
•CDI電子点火
•コンパクトマフラー付き


仕様:
排気量:55.64cc
パフォーマンス:5.6hp @ 7500rpm
アイドル:1500rpm
推奨される小道具:22x8、23x10
スパークプラグ:(CM6)
ボア/ストローク:45 x 35mm
燃料:2Cレギュラーガス混合30:1(慣らし運転)-40:1(通常飛行)

  • unboxing
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Graydon | 確認済みの購入者

  • Overall
  • Quality
  • Value

Incorrect carby fitting

Apr 25, 2022

The carby to reed valve fitting is incorrect. There is a gap between these ,the face of the carby is to small for the reed valve block assembly. This alows air to enter and the engine will not idle.
I have made a plate to fit between these that seals the passage.To see this fault you need to remove the cap with the big screw in it .

Serju | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very strong

Jan 10, 2022

Very strong, runs well even at running in phase. Easy to adjust .
Could be a little better finished, regarding casting and some flashes. Best buy at this size !

thierry | 確認済みの購入者

  • Overall
  • Quality
  • Value

Incomplete after-sales service on dispute declare

Nov 24, 2021

Engine incorrectly fitted at the factory, central propeller fixing nut It was loosened on first use which caused the fixing bolts in the propeller plate to break. After complaint we received the front washer and the 4 bolts but not the damaged propeller plate.
So still waiting for the propeller part to be able to use it.

Jean-Francois | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very bad motor

Oct 25, 2021

Impossible to adjust correctly iddle and hight with the screw. How I regret my DLE 55!!

JFJ | 確認済みの購入者

  • Overall
  • Quality
  • Value

Moteur très décevant loin de la qualité de fonctionnement du vrai DLE55

Oct 24, 2021

Impossible de régler correctement ce moteur. Si le moteur tourne bien, le lendemain il faut reprendre les réglages. Et même dans la même journée il faut reprendre les réglages. Le moteur est rodé et j'ai mis une bougie de qualité.
Impossible d'utiliser ce moteur sur un avion.

Monroe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Curious things worth mentioning I've noticed on the new 55CC gas engine I purchased.

Oct 22, 2021

First, let me state I just today decided to leave a review, and then coming to Hobby King I found less than two weeks from my invoice date of 10/06/21, for purchase of the 55CC gas engine, it has been discounted by $35.45, it might have been discounted the day after my invoice. I'm disappointed that I was not included in the discount given so soon after my purchase.
Now for the review; I have not ran the engine as yet, I have mounted a PK 22-8 propeller while doing so and noted the propeller bolts run through the hub and without tightening them they make contact with the inner hub where the ignition magnet is installed. Looks like I will have to shorten the propeller bolts by as much as 3mm before I tighten them properly.
Additionally, I notice a "slack" in the piston action. If rotating the propeller with the spark plug and muffler removed, placing a finger lightly on top of the piston for a little resistance, there is a definite click in either direction of rotation, I presume caused by loose clearance of the rod either on the wrist pin or the crank shaft. The bearings feel smooth, but this "click/slack" concerns me. I plan to update this review after successfully running the engine.
If after getting some satisfactory airtime with the engine I will increase the rating I've given.

BP | 確認済みの購入者

  • Overall
  • Quality
  • Value

TURNIGY 55 CC

Sep 04, 2021

Excellent value for the money.
Started easy runs really well .
It's turning a 22x10 prop in my Edge 540
Vertical performance is Amazing.

Jan-Roger | 確認済みの購入者

  • Overall
  • Quality
  • Value

Super!!

Jul 24, 2021

Started right out off the box.... and running strong with a 22x10 wooden prop...no adjustments so far...change the vakum tube with a longer one,because the original one is to short. With the orignal tube mounted you get a kink in it so the carburettor get no vacum to the fuel pump/membrane on top off the carburettor, therefore fuel starvation of fuel on low rpm/idle. Put in a longer vakum tube with no kinks on and engine runs beatifull! :-)

Gregory | 確認済みの購入者

  • Overall
  • Quality
  • Value

Garbage

Jun 17, 2021

As you can see with other reviews it won't idle. It has an air leak and I can tell you exactly where. The two engine halves are screwed together and sealant in between. Mine spews fuel from the seam. Runs good as long as you never want to land your plane because is won't idle. So what to do ship it back get another terd. Hmm probably toss it in the junk bin and call it a waste. Should have bought the DLE.

Oldrich | 確認済みの購入者

  • Overall
  • Quality
  • Value

Stojí to za h....Motor jde jen ve vysokých otáčkách a dělá si co chce .

May 01, 2021

Motor sám nenasaje palivo .Po dodání paliva do karburátoru jde jen ve vysokých otáčkách a dělá si co chce . Absolutně nepoužitelné . Netěsnost sání jsem nezjistil .
Vyměnil jsem i karburátor a je to stejné .

  1. 1
  2. 2
  3. 3
  4. 4
顧客ファイル
Manual Download [735]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!