Turnigy TrackStar 1/10スケール60AカーESCバージョン2

• Overall
• Quality
• Value

Customer Rated

May 23, 2015

I use this speed control in a Mini Revo. I run primarily indoor clay and after a full pack 2000 mah 25C 2s lipo the ESC comes off the track right at 105 degrees F with the fan or 130ish (F) with out fan using the stock 380 size vinelon motor. Most of the time I run without the included fan. Fits well on the the mini platform where the receiver box normally set. One thing to note this is not waterproof. Great value and i normally normally 6-10 packs in a row without a cool down and this esc doesnt even flinch. I have not tried 3s on this esc but it says its rated for 3s.

• Overall
• Quality
• Value

Certified Buyer Rated

May 01, 2015

Nice small size,easy to connect and programming.But i had problems to calibrate the ESC.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 07, 2015

It works really wellon a 3s on the turnigy desert buggy 1/10! I took it up to 51.5 km/h it can easily go up to 60plus km/h!

I had almost killed this esc because of reverse polarity but some how the wire got super hot and luckily the solder joint at the xt60 connector gave way and the wire got disconnected immediately and nothing happened to the esc! :D

All in all great esc! must buy.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 19, 2015

Great Product Works well with Turnigy Trackstar 1/10 9T 4370kV Brushless inrunner.

• Overall
• Quality
• Value

Customer Rated

Jan 24, 2015

Excellent ESC. My Son and I,both, run these ESC's in our off road trucks. Very easy to program with program card.

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2015

Great ESC.... Did a brushless conversion on my drifter and this was the ESC i did it with. Item looks really cool and stays cool with that metal and the high flow fan. This item will handle most 1/10 applications but be careful when running with high amp 550 motors. You can do it with right gearing I would recommend one of the temp gauges that are sold through the king as well to make sure not to top over the 150 degrees recommended. Great price to top it all off. For your first project or your 101st this is a great deal!

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 19, 2015

Excellent esc. Was so easy to program and gave my sct what it needed. Wires came presoldered. All I have to do was solder a new battery connector as I do not use xt-60. I would recommend it. A real bang for the buck.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 25, 2014

Awesome ESC that I purchased as a replacement for the stock one that went out in my brand new Turnigy Trooper 4x4. I waterproofed it with liquid electrical tape and run it VERY hard in the snow on a 3S Lipo and the stock motor. I've been getting 20-30 minute run times on the 6400mah Lipo. I obviously don't have an overheating issue here in the Alaska winter, so far it is a great buy!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 30, 2014

well mine worked for about 5 seconds, bad solder point.

• Overall
• Quality
• Value

Customer Rated

Oct 25, 2014

Hi you all, this is a very nice esc especially for the price. I put this esc in my new HK trooper sct and it works much better than the stock esc. You get more speed, more linear speed control, and the fan is quiet, You can't go wrong when you buy this esc.