Turnigy TrackStar 1 /第五センサレスブラシレスモーター760KV

• Overall
• Quality
• Value

Customer Rated

Jun 29, 2013

got 3 of these motors and tested them with trackstar 200amp esc at 6s ...when it gets to full throttle the motor starts vibrating alot ...and i have got similar results with all 3 motors ...its a really great product ...but can anyone tell me why it behaves like this ..

• Overall
• Quality
• Value

Customer Rated

Oct 26, 2012

first off, i would like to say its great motor, ive ran on both 8s and 6s in my custom converted e-baja 5b. but there are a few problems.
cons:
- other motors out there that have higher power that cost less.
-quality of aluminum used is poor and fins on motor are negligible.
-motor needs active cooling to operate below 50degrees C.

pros:
-power is definable there, i peaked at 5120w on 8s.
-massive wires and plugs , great for power transfer and don't heat up at all.
-easy to disassemble and maintain.

if your looking to buy this motor, the 150A track-star ESC i used for 6s will do just fine without heat issues, but if u run with castles-XL 8s ,you will need more cooling for both motor and ESC.

hope this helps.