新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Turnigy TrackStar 1/8センサードブラシレスモーター2400KV

Turnigy TrackStar 1/8センサードブラシレスモーター2400KV

QTY:

Now save save AU$0.00 AU$0.00

AU$73.98
Stock:
重量:
445 g
SKU:
9192000096

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

Turnigy TrackStarセンサードブラシレスモーターは、信じられないほどの価格で優れたパフォーマンスを提供します!

品質CNCモーターを搭載することは、手巻き、高純度の銅巻線と強力な焼結ネオジム磁石、あなたは文句を言わない他のどこにも、この口径のより良い価格のモーターを見つけることができます!統合センサーは、滑らかなスタートアップや加速を保証します。

TrackStar ブラシレスモータは、1/8のショートコーストラック、モンスタートラック、バギーや42サイズのモーターを使用して何か他のもののための素晴らしいアップグレードを行います。

特徴:
•優れたトルクと低速操縦性のためのセンサーベース
•任意のセンサ付き/センサレスESCに対応
•CNCアルミモーター缶
•高純度銅巻線
•取り外し可能/交換可能なローター
•強力な焼結ネオジム磁石
最大エネルギー変換のための•プレシジョンエンジニア

*注:センサケーブル付属

仕様:
サイズ:4270
RPM / V:2400 KV
ポーランド:4
センサ付き: はい (標準6ピンハーネス)
最大電圧:15V(4S)
最大電流:160A
最大ワット:2300W
抵抗:0.0048ohm
シャフトサイズ:5ミリメートル
缶直径:42ミリメートル
ことができます長さ:70ミリメートル
重さ:329グラム

Product
Specifications

追加情報

  • 単位:
    9192000096
  • Brand:
    TrackStar
  • 重量(g )
    445.00
  • 長さ
    110.00
  • Width:
    56.00
  • 高さ:
    83.00
  • KV ( RPM / V )
    2400.00
  • 最大電流( A )
    160.00
  • 電力( W ):
    2300.00
  • 長さB ( mm)の:
    70.00
  • ことができます長さD (ミリメートル)
    62.00
  • 最大電圧( V )
    15.00
  • シャフトA (ミリメートル):
    5.00
  • Unit Weight (g):
    329
  • 直径C (ミリメートル)
    42.00
  • 総丈E (ミリメートル)
    87.00
  • 抵抗( MH ):
    48.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I have this on an old T-maxx that I converted to electric. I have a dynamite .21 big block chassis with rpm arms, old school proline moab 40 series on Cheyenne wheels, savox 1270tg steering servo, summit trans, and a mmx esc. I run 6500mah 65c 4s lipo, and on an 85*f day, temp hits 120*f. 55mph at around 3/4 throttle is where the front tires come off of the ground
Quality
Value
Overall
Quality
Value
Overall
just received the Turnigy TrackStar 1/8th Sensored Brushless Motor 2400KV PRODUCT ID: 9192000096 .but i found that it had a problem while trying to run the motor with sensor cable provived , yes , i had tried other sensor cable as well but it still the same ,it running look like out of signal. i tryied to disconect the sensor cable and found it is working prefect.
in this case , what should i do ?
Quality
Value
Overall
Quality
Value
Overall
Tremendous power for my kyosho inferno brushless conversion. Big shaft, big bearings. Gets a bit warm on hotter days, I might have to gear a bit lower but it goes crazy fast on 4s with a 13t pinion.
Quality
Value
Overall
Quality
Value
Overall
I've bought this motor with a Turnigy Trackstar 150A GenII 1/8th Scale Sensored Brushless Car ESC to put on my savage s-25. The savage weight is 8.5 kilos with 2*3400mha 2s 40c. It's fully modded with lst shock absorber etc.... And my savage is just crazy!!! Backflip are easy to do ^^ Great esc! I recommend
Quality
Value
Overall
Quality
Value
Overall
Great motor! Runs cool in my Erevo, and has as much or more power than the oem Castle motor while being much more precise being sensored.. I did have to gear down a little bit due to the higher kv to lighten the load on my fairly low c rating batteries. Geared stock however I could be going half to three quarters throttle on 4s and just a slight increase in throttle would still lift the frontend off the ground, and the control was smooth enough to actually hold the wheelie until I ran out of room to go straight haha! A product.
Quality
Value
Overall
Quality
Value
Overall
I have nothing bad to say about this motor very well built runs very strong over sized bearings runs cool anyone on the fence about this motor will love it
Quality
Value
Overall
Quality
Value
Overall
I'm using this motor for last 2 months. Before using a cooling fan, the motor heated up to 90C and worked with no problems. Now, runing beside a 40x40 12V cooling fan, the motor heats up to max 65C. It delivers brutal power, the sensors work fine allso. I'm using it with a Gen2 150A Trackstar ESC. TOP BUY!
Quality
Value
Overall
Quality
Value
Overall
Awesome motor for the price, heaps of power on 4S, would recommend to anyone looking for a cheaper alternative to a castle or tekin motor.
Quality
Value
Overall
Upload
Videos
  • unboxing turnigy trackstar 1/8th sensored brushless motor 2400kv

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。