サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy TrackStar 17.5Tセンサードブラシレスモーター1870KV

Generating Links

Turnigy TrackStar 17.5Tセンサードブラシレスモーター1870KV

価格:

Now save 節約 ¥0.00 ¥0.00

¥5,758.21
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9052000022
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy TrackStarセンサードブラシレスモーターは、信じられないほどの価格で優れたパフォーマンスを提供します!

CNCモータアルマイト処理品質を特長とすると、手巻き、高純度の銅巻線と強力な焼結ネオジム磁石、あなたは文句を言わない他のどこにも、この口径のより良い価格のモーターを見つけることができます!彼らはまた、センサーは、滑らかなスタートアップや加速を保証しながら、微調整のためにあなたの乗り心地のパフォーマンスを可能にする調節可能なタイミングを備えています。

TrackStarブラシレスモータは、1/10のショートコーストラック、バギー、ツーリング車や540サイズのモーターを使用して何か他のもののための素晴らしいアップグレードを行います。

特徴:
•優れたトルクと低速操縦性のためのセンサーベース
•調整可能なタイミング
•任意のセンサ付き/センサレスESCに対応
•CNC加工ビレットT6アルミモーター缶
•高純度銅巻線
•ハイパワーはんだタブ
•取り外し可能/交換可能なローター
•強力な焼結ネオジム磁石
最大エネルギー変換のための•プレシジョンエンジニア


*注:センサケーブル付属

仕様:
缶サイズ:540
オン:17.5
RPM / V:1870kv
ポーランド:2
センサ付き: はい(標準6ピンハーネス)
最大電圧:11.1V〜14.8V(3〜4S)
最大電流:17A
最大ワット:250ワット
抵抗:0.0513ohm
無負荷電流なし:2A
シャフトサイズ:3.175ミリメートル
缶直径:36ミリメートル
ことができます長さ:51.5ミリメートル
重さ:156グラム

  • KV ( RPM / V ) 1870.00
  • 最大電流( A ) 17.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 15.00
  • 電力( W ) 250.00
  • シャフトA (ミリメートル) 3.18
  • 長さB ( mm)の 52.00
  • 直径C (ミリメートル) 36.00
  • ことができます長さD (ミリメートル) 38.00
  • 総丈E (ミリメートル) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Turnigy Trackstar Motor
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

JAYSPLANES | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 19, 2012

right this motor and the trackstar 100amp esc bruns up the sensor,s in the motor when you plug in the sensor plug and it work,s fine with out the sensor so DO NOT USE SENSOR WITH 17.5T 1870KV AND TRACKSTAR 100AMP SENSORED ESC

0x0539 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 20, 2012

Great looking motor with super silent smooth operation. If you're planing to use this motor on a crawler/scaler then you *really* must have a sensored ESC otherwise the motor will gag a lot when going slowly over obstacles.

Grazy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 22, 2012

Nearly killed this motor with the Trackstar 100A ESC. It survived a smoke signal it send out for help, but is still running good with no problem and no vissible damage inside after opening and inspection without stripping the windings. There may be some damage in the middle of the coils. It is well and very neatly constucted. I'll get another more suitable ESC for it and I think it still have a lot of wheelspins on it. Nice motor

RC888 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 13, 2012

Great motor! Installed into a Honcho with the HobbyKing 60A sensored ESC on 3S. Better top speeds than stock, and still slow enough for crawling. Using stock 20T pinion. I also removed the fan and when through 2 packs at max speed. ESC and motor were barely warm. I think the low kV is perfect for crawling/trail running. Mine came with a sensor cable.

Nikolai E. | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2012

Good quality motor. Tired of brushed motors in a M car series from Tamiya, you should really consider to buy this motor.

nexxus | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2012

Well packaged, sensor lead is rubbish, magnets feel nice and strong, lower KV than other 17.5 motors so may need to be geared up. ended up putting it in my son's M05 as the 3300kv motor was too much for him, runs well and minimal cogging with an EX-RUN 35A Esc, barely gets warm and ESC has little heat without any fan on the heatsink.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!