ユニバーサル12ウェイ120Aマルチコプター配電ハブW / LEDは＆デュアルBECS

• Overall
• Quality
• Value

not a good build

Jun 07, 2021

unit was soldered and tested with a VOM for ant shorts. when powered up it let out the magic smoke., bec was removed and we hooked up as just a distro board to esc on drone. will not handle anyplace close to the 120 amps it is rated for

• Overall
• Quality
• Value

Size isn't true

Mar 03, 2021

28 series si equal to 22 series is very small

• Overall
• Quality
• Value

Great PDB

Jul 25, 2019

This is a great product and fits perfectly on the Tarot 690s frames. Very simple to assemble provides both 5 and 12V outputs. Recommended product from HobbyKing.

• Overall
• Quality
• Value

Works perfectly well

Aug 19, 2017

The space between the PCB and the regulators is a bit wide, so the whole thing measures 21mm in height.
Regulators did, what they meant to do, but the adjustable one has a drop down of approx. 3V.
So you need 13V, to get it working with a 10V output (or 15V to get 12V).

• Overall
• Quality
• Value

Customer Rated

Aug 10, 2015

Well I bought this for the BEC's... Because there were no other small form-factor adjustable and 5V BEC's avalible on this site at the time.
Neither of the BEC's work. I bought 2 of these boards, and they both act identically.
The 5V BEC outputs only around 3.8V, and the adjustable BEC is stuck at 9.2V because the variable resistor is disconnected internally and turning the knob does not change it's resistance (on BOTH of the boards!)
Pretty disappointed with this, it was pretty expensive just for some little BEC's...
Although I must admit, looking past the BEC's not working, the PCB is really nice. I just wish the BEC's worked.

• Overall
• Quality
• Value

Customer Rated

Feb 22, 2015

Good way to manage power distribution. It drastically reduces excessive wire webs. You gotta be VERY careful while soldering as the positive/negative pins have hairline gap separating them. Even a slightest error can cause serious damages and short-circuits. LEDs are blue in color, not so bright, you'll barely see them during daytime. Remember- soldering skill is needed.Rest is all good.