サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

菜食主義者GW320Xドローンフレームキット

Generating Links

菜食主義者GW320Xドローンフレームキット

価格:

Now save 節約 ¥0.00 ¥0.00

¥10,299.32
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
697000002-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

日本国内で設計、製作、菜食主義者のドローンフレームは、私たちが今まで品質と仕上がりの面で見た中で最高の一つです。それはあなたがこの製品には失望されません探している品質かどう炭素切削と仕上げは、絶妙の短いものではありません。

GW320Xは、レースや極端な3D操縦のために作られています。これはよく考え抜かれ、強い、「H」フレーム設計です。腕はあなたの飛行スタイルに合わせてどちらかの30または45度に設定することができます。

152グラムで入ってくるGW320Xは、非常に軽量フレームです。軽量を考えると、あなたはそれが壊れてあることが前提となりますが、これは偉大な強度と耐久性を与える完全にカーボンファイバーフレームです。アームは、中央フレーム2mmの炭素繊維と4ミリメートル多層カーボンファイバーから作られています。腕は、パフォーマンスの向上のために5-6 "プロペラを可能にするために十分な長さです。

30ミリメートルセンターフレームプレートは名瀬、ナノまたはCC3DフライトコントローラとFPVカメラと送信機、受信機およびPDBなどの他のすべての要件を実装するために最適です。アッパーデッキは、あなたが記録カメラのアングルデッキができた平坦なデッキを持っているか、するか許可する2つのセクションで来ます。上甲板上の振動減衰があります。

それは非常に簡単ビルドです。だから、いくつかの高速飛行のための電力うちお好みのギアと最大を追加します。

特徴:
•レースや3Dの楽しみのために設計
•腕は30度から45度の間で変更することができます
•厚い4.0ミリメートル、耐久性、多層カーボンファイバーアーム
•センターフレーム2.0ミリメートル炭素繊維
•16/19メートルマウント、2204年から2206年のモーターのために設計された、3ミリメートルの穴
•プロペラサイズ5-6」
•機械的なプレート寸法は、30ミリメートルは名瀬、ナノ、CC3Dなどを使用することができますです
•名前GWはゴーワンと発音されます。これは、強い腕の日本語です

仕様:
素材: カーボンファイバーフレーム
ホイールベース:320ミリメートル(30/45度アームの形成)
フレームの高さ:36ミリメートル
フレーム重量:152グラム
モーターマウントボルト穴:16/19ミリメートル

含まれるもの:
GW320Xフレームキット
ネジバッグ

必須:
4×2204から2206年のモーター
4×15-30A ESC
1×バッテリー1000mAhの-2200mAhの11.1-22.2V(3S-4S)
4×5-6 "プロペラ
1×フライトコントローラ
×1配電基板
5-6チャネルTX / RX

  • Vego GW320x GW250X Quad Frame
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Frank | 確認済みの購入者

  • Overall
  • Quality
  • Value

Excellent frame - super quality

Apr 09, 2017

Don't know what the other reviewer was talking about when he said there were no holes in the baseplate for the FC. Of COURSE there are! In fact, I stacked my Omnibus F3 FC and 4 in 1 ESC on short nylon stand-offs, and with the included 25mm black stand offs and the 3mm thick arms, I had plenty of clearance between top and bottom plate. Don't build the way the photo shows!!! Build it to look like an Immersion Vortex 250 Pro and everything (rx included) can be between the two main decks, fully protected. No need for the two small plates unless you add GPS (why in this size frame??). With a set of EMAX 2600kv Race edition motors and 3 blade props this thing is HOT!!! Love the frame. Highly recommended.

eric | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great quality but not very practical

Feb 24, 2017

I was looking for something larger than a 250 size quad that I could mount a standard set up and GPS. The 320 size looked perfect for what I was looking for. When I un boxed this kit it looked very simple and nice quality, great! After assembling the frame I started to plan how each component will be placed and realized there are no holes on the base plate for the FC. There are 2 holes that are for two of the standoffs that are the same size as a standard FC but if using them, your FC will not be centered on the base plate. (look at the picture of the bottom plate and you will see what I mean) Therefore I had to drill holes in the plate myself, not a huge problem but a little time consuming and should be mentioned in the kit description. Also, there are no landing feet or pads included which you will need to get unless you're ok landing directly on the bottom base plate! And one last thing to consider is battery placement, on my set up the battery will have to be strapped to the bottom of the quad so I have to craft my own landing skids.

dtm360 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2016

Very nice quality carbon, Not the very best I have seen (I use to collect exotic RC cars - QVA!) but still pretty good!

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー