サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

渦ハイドロレーシングボート(475ミリメートル)プラグ・アンド・ドライブ - レッド

Generating Links

渦ハイドロレーシングボート(475ミリメートル)プラグ・アンド・ドライブ - レッド

価格:

Now save 節約 ¥0.00 ¥0.00

¥22,682.92
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
189000029
送料無料したい? クリックする こちらへ 詳細情報を参照する

渦水力発電は、そのきっかけに競争を残すようにしてくださいある高性能475ミリメートルのガラス繊維のレーシングボートです!また、確かにその美しく仕上がったレースのペイントスキームを使用してローカルのボート池で頭を向けるだろう。

このようなCNC合金は、マウント、舵ストラットおよびプリインストール水冷却と高トルクステアリングサーボとフィン、ブラシレス発電システムを回すなどの機能で、渦水力発電は、冗談ではありません!これは、1真剣に高速船だと実行のための大規模なオープン面積を必要とする、スイミングプールのための玩具ではありません。

渦は、そのように、あなた自身の2CHの送信機/受信機と3S 1300〜の1500mAh lipolyバッテリーを追加するようにのみ必要になりますプラグとドライブの構成に到着します。単にプロペラ、舵をインストールし、フィン&ラジオシステムの電源を入れ、水をヒットするあなたの準備を!

特徴:
美しく描いた、軽量グラスファイバー船体
CNC合金は、ストラットマウント舵とフィンを回します
ハイトルクステアリングサーボプリインストール
水冷ブラシレス発電システムがプリインストール

仕様:
長さ:475ミリメートル
:215ミリメートル
重量:570グラム (バッテリーを除きます)
モーター:2836 2770KVブラシレスアウトランナー
ESC:40Aの 水冷
サーボ:9グラム
バッテリー:3S 1300〜の1500mAh(必須)

含まれています:
渦ハイドロレーシングボート
すべての必要なハードウェア
防水ハッチテープの1×ロール

必要なもの:
2CHトランスミッタ/レシーバ
3S 1300〜の1500mAh lipolyバッテリー

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

patheli | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 27, 2012

Chers amis modlistes fuyez Hobbyking n'achetez pas chez eux : emballage bacl, en cas de casse vous n'aurez rien, Hobbyking c'est la roulette russe, il ne faut pas avoir la balle ! ces gens ne mritent pas de travailler, aucun srieux, vous avez des prix bas au dtriment de la qualit sur certains produits en particulier les bateaux. La coupe est pleine avec eux, mon avocat va se faire un plaisir de les laminer!

patheli | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 27, 2012

N'achetez pas ! si vous avez un problme de casse la rcption ils ne rpondent pas. Ces gens sont anti-commeriaux et malhonntes : ils vous demandent des photos pour vous faire croire qu'ils grent votre problme puis ne vous rpondent jamais mme si vous les relancez. Mon avocat va se faire un plaisir de les craser avec toutes les preuves accablantes contre eux. Hobbyking a va changer pour vous, en attendant profitez bien de votre systme !

patheli | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 27, 2012

Fuyez ce site ! mon bateau arriv cass mais le carton de livraison aucun coup. Ils l'ont mis dja cass avant l'envoi. Ce sont des autruches quand il y a une casse. Envoy 12 photos et suivi instructions, relances, et ne rpondent pas. Ces gens la sont vicieux, ils savent que le client ne va pas leur faire un procs pour 100 d'achat. Il faut que les gens qui ont eu des problmes non rsolus se groupent pour les attaquer en justice. Ils vont avoir de mes nouvelles bientt avec mon avocat ! La pub je vais les soigner.

patheli | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 22, 2012

Du, bateau cass sur environ 10 cm ( toute la pointe avant jusqu' l'ouverture dessus de la coque ) dans le carton d'emballage alors que le carton n'a reu aucun coup ! je pense qu'ils l'ont mis dja cass dans le carton. Toutes les vis ne sont pas serres. Leur carton d'emballage est souple ce qui ne protge pas assez le bateau. Je vais voir ce qu'ils vont dire. Le bateau est inutilisable en l'tat. Les autres utilisateurs n'ont pas eu ce problme de casse. Par contre la dco est bien ralise, vernie.

frieb5 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2012

Great little boat for the money. Having trouble with water getting in the hull somewhere but other than that the quality is good. Not for begginers that's for sure. Well done on another good rtr boat HK.

SpeedyG | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2012

Maiden voyage proved quite successful, this little boat Rips! Takes some effort to get on plane but once it does, she'll cruise at around 25 MPH... Had to move the rudder rod to the outermost hole in the servo horn to get it to turn properly, otherwise it was a 50 foot turning radius... Found a large crack in the front of the hull between the sponsons which I will fix before the next cruise... Water seems to be coming up the stuffing tube past the flex shaft due to the fact that the stuffing tube does not fit inside the strut, it only butts up against it. I noticed some misalignment - will repair with shrink tube. Not sure how to program the lipo cutoff - my new NanoTech was pulled down past 3V per cell, ESC was cool and motor was lukewarm after 5 minutes of full throttle pulls. A fun little craft which will someday be fitted with a foam push bar so it can retrieve the Genesis if a problem should arise.

SpeedyG | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 29, 2012

Received my Vortex today. Upon initial inspection i decided to gut the entire boat and go over every piece. Ran a small drill bit through all water ports, added more epoxy to motor mount, greased the flex shaft, added epoxy to underside of hull where stuffing tube exits, added blue loctite to all screws. Battery tray only fits one Nanotech 3s 1300mah battery. I will be using the HK310 radio system tonight during its maiden voyage. Will post results soon.

homzaracing | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 25, 2012

Great lookin boat nice hardware awsome paint dont like the GOGOGO still nice going to repaint

njoyd | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 15, 2012

Nice boat,super fast:)This thing flyes on water and turns sharp!

This is not for small kids

Great race boat for little money

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー