新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

Votec 332 3Dバルサ1397ミリメートル(ARF)

Votec 332 3Dバルサ1397ミリメートル(ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
4495 g
SKU:
VOTECH322
商品概要

通常の曲技飛行スケールモデルとは少し違うファンシー何か?この見事に作られたVotec 332はあなたのためだけです!

この見栄えARFモデルはフルバルサ/プライ構造であり、光はまだ強いように構築され、それは完全なエアフォイル水平尾翼と寛大なコントロールサーフェスのすべてのラウンドを提供しています。仕上がりが優れていると巧妙に塗装ホイールパンツとカウルをカバーし、きれいに適用機能します。 Votecもキャノピーを外しやすいことの2PCの翼プラグインと大の非常に実用的な礼儀、です。付属のハードウェアは、この見事なアクロバットモデルは二重の迅速な時間であなたのフィールドでハリアーを実行する必要があり、優れた品質とビルド時間の点です。

爽快違う、間違いなくVotec 322申し出は、あなたのフィールドの話のポイントになり見栄え、すばらしい行う曲技飛行スケールモデルの両方の3D&スポーツパイロットがあります!

仕様:
翼幅:1397ミリメートル
ウィングエリア:62.4dm2
長さ:1384.5ミリメートル
ラダーエリア:3.28dm2
スタブエリア:7.343dm2
エレベーターエリア:3.96dm2
フライング重量:1.7キロ〜1.8キロ

必要なもの:
独自の4〜6チャンネルTX / RX
4250ブラシレスアウトランナーモーター
60A ESC BEC /ワット
4×MGハイトルクマイクロサーボ
2200mAhの〜3300mAh 4S Lipolyバッテリー

Product
Specifications

追加情報

  • 単位:
    VOTECH322
  • Brand:
    いいえ
  • 重量(g )
    4495.00
  • 長さ
    1160.00
  • Width:
    240.00
  • 高さ:
    390.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
After the build which I followed the instructions found on the internet. Bulid quite straight forward, just had little trouble with wing spar too tight on one wing. maiden yesterday, handled well, no bad habits and with plush 60 esc, sk3 3548 700kv motor, pac 14x7, zippy 3000mah 40c. It flew vertical easily, knife edged well, snap roll and would still float in with very little power for easy landing. I only mod strengthened u/c area. would recommend. As described in listing. Love this plane. 1 star less for quality for u/c. This after 7 flights.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've received my Votec, double packed without worth mentioning damages from the EU warehouse.
It is a very well build and suerbly covered balsa model. High end hardware added.
The second thing I've noticed, and that is a very big disadvantage, is that there's no manual available.
Also the subscribtion on the site mentiones 4 servo's but actually 5 are needed (there's a split elevator).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got my votec today, And the finish on it is incredible, I am still yet to fly it
but i have no doubt that it will fly as good as it looks.
The G46- 670kv motor i am running in it seems to fit in perfectly and with a
15x7 i am hoping it will fly 3d.
I strongly recommend this plane for anyone who is into 3d or sport flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
simplesmente lindo .... e voa muitoooooo show
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice plane, excelent performance and quality, however not instructions included. My setup is a motor Turnigy Aerodrive SK3 3548-700Kv, Prop APC 14x8, ESC Turnigy 70A, Servos TGY-390DMH for aileron and TGY-306G for elevator and rudder.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WOW that is all I should say. My Votec came today and I got it straight out of the box. (YES we should always check for damage straight away). I just want to start building mine. (By the way ZERO damage, very well double boxed). Yes no instructions but I knew that before I order, form reading the first review. I (before I bought) found a sweet colour manual under the FILES tab above. (It showed some very nice coloured pictures, so I knew just what I was buying, THANKYOU HobbyKing). I did think the wing halves were a bit short, measuring at 600mm each (1200mm in total), but once I saw the fabulous body (which was about 197mm wide) I was very happy. (Body 197 plus 2wing halves 1200mm = 1397mm.) It is just the right size. It is laid out in my spare room, to get it all ready for build. As I said WOW! (More to come)

So I tried to post the review but I could not. (I was still a Standard User, now Gold User so I can post and add). So now it is a few days later. I have started to build. It is all going to well. I cannot wait to fly. Reading the listing forum, I am a bit confused on the motor set up. So if anyone reading this can you help, if you know. The listing says one motor but the users say another!!!

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Was turned on to this site from a freind and this kit looked like a great deal. Read the reviews and noted very few negetives, so I ordered one up. After three weeks it finally got here and upone inital inspection the nose cowling was crushed (one of the few negatives in the reviews)! Then I noticed the motor (Turnigy 4258-800)...this being my first interaction with HK I just added it to the cart, along with the sugested servos. The 4258 will not fit this kit (at least not without a mount adapter that is not mentioned and would probably weight 1/2 a pound!), and I'm not optimistic on the servo's working in all the mounts. So take it from someone that was too trusting, the convinent tabs for ESC, MOTOR, BATTERY, SERVO, PARTS/ACC., do your own research, these tabs will just put you into another three week wait.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No instructions make the Votec a challenge to put together. The separate elevators are also a challenge to get working properly. Otherwise a fun model that looks great and flies straigh and true. The envy of the Club!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received my kit. It really is every bit as good as it looks in the pics. Amazing quality and fittings for the price. I have noticed that there is no downthrust incorperated into the firewall. Does anyone know if this is required?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ok took about 20 flights this weekend - no issues, the plane is very well behaved and predictable with no bad habits so far. with my set up it hovers at half throttle and pull out is very good. landings are very easy it practicly glides down, takeoffs are 2 feet if you want. this is an excellent sport flyer and mild 3d (which is how i mostly fly). rudder stands up fine but i didnt try any knife edge loops or things that would load it too much, regular knife edge was at half throttle with 45deg deflection. over all i love the plane and will buy another if goes on sale again.



thx

-tom



ps - ntm 4248 spat out one magnet on 10th flight, i reglued then all with extra strength ca, 10 more flights all is good so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Votec 332 3D Balsa 1397mm

Upload video
Upload
Files

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。