新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

木製スポンソンレースボートキット(495ミリメートル)

木製スポンソンレースボートキット(495ミリメートル)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
432 g
SKU:
099000008

Combine

essential items and
battery
servo
motor
acc
商品概要

これは古典的なスタイルのレース艇は、積層合板から構築され、美しく仕上がっています。それは、電子機器にアクセスし、バッテリーに風を交換する2つの取り外し可能なハッチパネルを持っています。また、軽量で、非常に硬質炭素繊維スポンソンブームがサポートしています。

この船は、あなたがそのような方向舵、プロペラシャフト/マウント、プロペラやエレクトロニクスなど、独自のハードウェアを追加する必要がありますを意味し、キットの形態です。

*注:組み立てられたモデルの上の写真は参考用です。このバージョンでは、組み立てられ、最後の写真に示すようにフラット・パックの形に到着する必要があります。組み立て済みバージョンについては、下記の関連項目を参照してください。


推奨機器

プロペラシャフト:3.17ミリメートル
ラダー:75ミリメートル
プロペラ:1.4x27
モーター: 水冷28ミリメートルの3700kv
ESC: 水冷40A +
サーボ:9グラム×1
バッテリー:3S 2200mAhのlipoly
無線システム:2CH

仕様:
ハルの材質: 積層合板
ハルの長さ:495ミリメートル
:380ミリメートル
身長:60ミリメートル
ハル重さ:230グラム

Product
Specifications

追加情報

  • 単位:
    099000008
  • Brand:
    いいえ
  • 重量(g )
    432.00
  • 長さ
    455.00
  • Width:
    15.00
  • 高さ:
    145.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
kit arrived with missing laser cut board! In process for RMA but I dont thing HK will sent only the missing part! I will have to sent back the item to HB!! less trouble to buy wood and make that missing part!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My kit arrived with missing laser cut board,tried for several weeks to have this resolved with hobbyking,but had to use paypal for refund,cannot build boat so gave up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just my own opinion but the kit I received on looks seemed to be a very average cut kit there were burn marks all over the ply. the actual kit goes together very nicely but I would recommend a few things. The ply has been badly laminated enough that some of the parts are very weak (top section and covers)
First and foremost throw out the carbon tubing it is of very low quality put steel or brass tubes in that protrude slightly from the sponsons and main hull and use carbon rod that fits into the tubing use small clips to hold it in.
do not use CA glue to put a ply kit together use a pva and seal with a good epoxy resin.

I wont go into the hardware selection just yet but I will do a build diary on the forum when im done
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Part 1
Well upon opening the box I was very impressed with cut quality and overall quality of the plywood. Some of the laser work needed an xacto to pop free though, but fit and finish seems to be dead on. Ill post another review once I finish the build with all my hardware used and tuning tips.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice kit
fun to build and very simple to build
i will keep you posted to how it goes and what i end up running in the boat in the way of hard wear
i will buy another kit as a 2nd boat
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hey Hobby King, we want a STRUT for this hull. Nobody can do much with all these hulls without the hardware!

2mm ply except tub sides which are 2.3mm. The design is heavy. No foam cores for the sponsons. Sponsons are permanently attached with current design. Design will make it difficult to make sponsons removable. Holes already in transom- bad thing when you cant get the right strut!

I would like to build 3-4 of these in total to encourage others to boat in my area.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Sponson Race Boat

Upload video
Upload
Files

Combine

essential items and
battery
servo
motor
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。