The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY T-7A is supplied in a "Plug-N-Fly" format meaning that it not only includes the fan, motor, and ESC, but 5 x 9g digital servos as well, all you need to supply is a transmitter, receiver, and a 4S (14.8V) 2200~2650mAh LiPo battery. The strong landing gear supplied is fixed with a steerable nose gear, but due to the very stable flight characteristics of the T-7A, it is quite happy being hand-launched with the landing gear removed. This takes it to the next level with even more speed and almost unlimited vertical performance.

The model is made from very tough EPO foam and is beautifully finished in the color scheme used for training and other missions of the United States Air Force. Assembly is quick and simple, there is a small amount of gluing to do on the tail components, but the rest is simply screwed together.

So if you are after a great-looking, scale EDF jet that can be flown with or without landing gear, is easy to hand launch, is smooth and stable in flight with excellent handling qualities, then the XFLY T-7A Red Hawk is for you.

Features:
• Supplied as Plug-N-Fly complete with powerful 4S compatible 64mm 12-blade fan unit, brushless motor, ESC, and 5 x 9g digital servos
• Scale model of the iconic plane flown by the US Air Force
• Can be flown with, or without landing gear
• Crystal clear canopy with cockpit detail and pilot figure
• Ball-link equipped servo linkages for precise control
• Constructed from lightweight, tough EPO foam
• Suitable for intermediate to experienced pilots

Specs:
Type: XFLY (PNF) T-7A Red Hawk w/64mm 12 Blade EDF Fan & 4S Power System
Wingspan: 750mm
Length: 960mm
Flying Weight: 1100g
EDF Fan Unit: 64mm 12-blade
Motor: 2840-3200KV brushless inrunner
ESC: 40A brushless w/BEC
Servos: 5 x 9g digital
No of Channels: 4 (throttle/ailerons/elevator/rudder)
Recommended Battery: 14.8V (4S) 2200/2650mAh LiPo (not supplied)
Color Scheme: US Air Force
Material: EPO foam

Included:
1 x XFLY T-7A Red Hawk airframe in US Air Force color scheme
1 x 64mm 12-blade EDF unit
1 x 2840-3200KV brushless inrunner motor
1 x 40A brushless ESC w/BEC
5 x 9g digital servo
1 x Set of fixed landing gear w/steerable nose gear

Required:
1 x 4ch transmitter and receiver
1 x 14.8V (4S) 2200/2650mAh LiPo battery
1 x Suitable LiPo charger

Please note: A copy of the assembly manual is available under the "Manual/Files" tab.