New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

XK3650-7900KVセンサードブラシレスInrunner(5T)

XK3650-7900KVセンサードブラシレスInrunner(5T)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
重量:
248 g
SKU:
XK3650-7900KV
WANT FREE SHIPPING? Click here to find out more!

XK3650-7900KVセンサードブラシレスInrunner

仕様。
最大アンペア:60A
最大ボルト:7.4V
最大ワット:445W
RPM / V:7900kv(5T)
抵抗:0.0045オーム
無負荷電流:7.2A(7.4Vません)
外形寸法:35.8ミリメートルのXの52.5ミリメートル
取付穴の深さ:4ミリメートル
延長シャフトの長さ:15ミリメートル
軸径:3.175ミリメートル
重さ:165グラム

  • 単位 XK3650-7900KV
  • Brand -
  • 重量(g ) 248.00
  • 長さ 0.00
  • Width 0.00
  • 高さ 0.00
  • KV ( RPM / V ) 7900.00
  • 最大電流( A ) 60.00
  • 抵抗( MH ) 5.00
  • 最大電圧( V ) 7.00
  • 電力( W ) 445.00
  • シャフトA (ミリメートル) 3.18
  • 長さB ( mm)の 53.00
  • 直径C (ミリメートル) 36.00
  • ことができます長さD (ミリメートル) 44.00
  • 総丈E (ミリメートル) 67.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Wish it came with some wires so I wouldn't have to solder.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wish it came with some wires so I wouldn't have to solder.

Put this in my DB01 4WD buggy and it is a seriously quick motor, maybe not as quick as the equivalent from one of the big brands but then it is also about a third of the price. My only complaint is that it has fixed timing but when you have this much power does it really matter? I would definitely recommend this to anybody who wants a cheap mod motor for racing, but only when your motor is in-board as the ventilation holes could pose a problem for rear mount motors in buggies such as TRF201 or B4.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put this in my DB01 4WD buggy and it is a seriously quick motor, maybe not as quick as the equivalent from one of the big brands but then it is also about a third of the price. My only complaint is that it has fixed timing but when you have this much power does it really matter? I would definitely recommend this to anybody who wants a cheap mod motor for racing, but only when your motor is in-board as the ventilation holes could pose a problem for rear mount motors in buggies such as TRF201 or B4.

Excellent motor!!! Use it on my Tamiya F103GT 2wd. Esc was Turnigy Trackstar 60A, Lipo Turnigy 4000mah 2s hardcase, gear at 3.61. After 15min run everything is only slight warm to touch!
The motor is so quiet when running, motor start smooth with minimal cogging in sensorless mode. Good construction and strong magnet. Thanks Hobbyking!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent motor!!! Use it on my Tamiya F103GT 2wd. Esc was Turnigy Trackstar 60A, Lipo Turnigy 4000mah 2s hardcase, gear at 3.61. After 15min run everything is only slight warm to touch!
The motor is so quiet when running, motor start smooth with minimal cogging in sensorless mode. Good construction and strong magnet. Thanks Hobbyking!!!

Drive it on the HPI Sprint 2 with HK 100A sensor, it is worth every cent. Cheap and strong, works well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Drive it on the HPI Sprint 2 with HK 100A sensor, it is worth every cent. Cheap and strong, works well.

Have this on my TC4 with the 60A esc, goes like stink. runs very cool and makes theold 5700KV i had in there look like a toy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have this on my TC4 with the 60A esc, goes like stink. runs very cool and makes theold 5700KV i had in there look like a toy

Easy to solder, solder took to the cups very easily. The actual colour of the motor is not black as the picture leads to believe, it's grey. Bench runs fine with the sensored 60A car esc in sensored mode.



It's build construction is excellent and very clean with access to both end bearings to add some scorpion oil when needed without having to open it up. Hand turning the shaft suggests a very strong magnet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to solder, solder took to the cups very easily. The actual colour of the motor is not black as the picture leads to believe, it's grey. Bench runs fine with the sensored 60A car esc in sensored mode.



It's build construction is excellent and very clean with access to both end bearings to add some scorpion oil when needed without having to open it up. Hand turning the shaft suggests a very strong magnet.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!