New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

ミッドカニランディングギア(600ミリメートル)とZ600-V3クワッドローターフレーム(ホワイト/レッド)

ミッドカニランディングギア(600ミリメートル)とZ600-V3クワッドローターフレーム(ホワイト/レッド)

Discontinued Product

Please continue searching for a similar product.
SKU:
450000066-0
WANT FREE SHIPPING? Click here to find out more!

Z600-V3は、品質の素材から内蔵スーパーサイズと考え抜か600ミリメートルクワッドフレームです。 V3アームは超耐久性ポリアミドナイロンから構成され、屈曲を減らすために、より厚いと強いている間、メインフレームは、ガラス繊維です。

アセンブリは、フレームボルトのすべての事前のねじ真鍮スリーブと簡単ですので、ノーロックナットは必要ありません。このフレームの大きな特徴は、カメラや他のアクセサリーを取り付けるためのメインフレーム底板の前面および背面に大型取り付けタブです。これは、空中映像を取るか、または任意の追加の取り付けブラケットを追加する必要なしFPVを飛ぶのに最適な方法になります。

Z600はまた向きに最適です色の武器(2白と2赤)を備えています。それはあなたが異なる色の小道具を必要とせずに右方向に飛んで維持するのに役立ちます。

Z600は、下部フレームにマウントするためのスリップミッド脚カニスタイルの着陸装置が含まれています。私たちは、このようなマルチローターコントロールボード、ESC&モーターなどのマルチローターエレクトロニクスのフルラインを提供しています。空気中のクワッドを取得しやすくまたはより手頃な価格ではありませんでした!

特徴:
•品質のガラス繊維とポリアミドナイロンから構築されました。
•フレームボルトのすべてのための真鍮のスリーブを事前スレッド。
•オリエンテーション用のカラーアームが右方向に飛んであなたを維持します。
•ミッド脚カニスタイルのランディングギア
•簡単にカメラが搭載するためのメインフレームの底板に大型取り付けタブをクリックします。
•簡単なアセンブリ。

仕様:
:600ミリメートル
身長:カニギアとカニギアO / W 58ミリメートル 、138ミリメートル
重量:390グラム (ワット/含まカニ半ばリフトギア)
モーターマウントボルト穴:16/19ミリメートル

  • 単位 450000066-0
  • Brand -
  • 容量(mAh ) -
  • 重量 568.0000
  • 長さ 360.00
  • Width 65.00
  • 高さ 150.00
  • Z700v-2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Eu comprei esse frame, e coloquei 4 motores sunnysky , com esc afro de 30 amp aqui da HC, usando hlice 10x4. Ficou muito bom e econmico com 4s 5800mha. Tem espao ate pra uma bateria de 4s 10amp.O quadricptero com baterias 4s 5800, fica muito estvel e muito bonito no cu. ja com a 10amperes 4s, da uma tremida pra decolar mas voa direitinho. voa meia hora. eu vou comprar outro..muito bom..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Eu comprei esse frame, e coloquei 4 motores sunnysky , com esc afro de 30 amp aqui da HC, usando hlice 10x4. Ficou muito bom e econmico com 4s 5800mha. Tem espao ate pra uma bateria de 4s 10amp.O quadricptero com baterias 4s 5800, fica muito estvel e muito bonito no cu. ja com a 10amperes 4s, da uma tremida pra decolar mas voa direitinho. voa meia hora. eu vou comprar outro..muito bom..

I bought this for a school project (my daughter's). It delivered on every promise. It is robust, easy to see and easy to build on- we customized some of the structure, and added a 3rd platform for components, but it was easy to construct- went together with no problems and has held up well to new pilot abuse.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for a school project (my daughter's). It delivered on every promise. It is robust, easy to see and easy to build on- we customized some of the structure, and added a 3rd platform for components, but it was easy to construct- went together with no problems and has held up well to new pilot abuse.

At First, My quad (wight: 1750g) works perfectly with this frame for ~10 flights..After that It was crashed on coconut tree, the frame was not broken, but some arm had very light bend. after check and repaired the vehicle, I armed again..it is jerking/vibrating more and fly uncontrollable and soon get crash heavily...the vibration problem is not fixed yet..It was the problem of frame..more flexing after a single crash..so vibrating more when armed at 60pcnt throttle.. So I am not recommending this frame anymore..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

At First, My quad (wight: 1750g) works perfectly with this frame for ~10 flights..After that It was crashed on coconut tree, the frame was not broken, but some arm had very light bend. after check and repaired the vehicle, I armed again..it is jerking/vibrating more and fly uncontrollable and soon get crash heavily...the vibration problem is not fixed yet..It was the problem of frame..more flexing after a single crash..so vibrating more when armed at 60pcnt throttle.. So I am not recommending this frame anymore..

Nice and strong frame, definetly would buy it again! It's a little flexible, so when you crash it doesn't brake. Still it's strong enough to fly stable. It's hard to fit a camera gimbal under the frame. Most are to large.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and strong frame, definetly would buy it again! It's a little flexible, so when you crash it doesn't brake. Still it's strong enough to fly stable. It's hard to fit a camera gimbal under the frame. Most are to large.

This framework is not good for anything , bend , vibrate too much, in short words is not quality for Hobyy king , if you have nice quality stuff please do not put them on sale

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This framework is not good for anything , bend , vibrate too much, in short words is not quality for Hobyy king , if you have nice quality stuff please do not put them on sale

I have ordered these and he's very bad holes do not come out of the schroedraad. wire ends wont come loose and the holes are full of plastic I have the set immediately thrown in the garbage.
HK must keep better control

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have ordered these and he's very bad holes do not come out of the schroedraad. wire ends wont come loose and the holes are full of plastic I have the set immediately thrown in the garbage.
HK must keep better control

Velmi odoln rm proti pokozen, ale jeliko je mkk, jsou zde do urit mry problmy s kmity a vybracemi.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Velmi odoln rm proti pokozen, ale jeliko je mkk, jsou zde do urit mry problmy s kmity a vybracemi.

The Z600 is a nice, fairly robust frame. There are some issues with regard to alignment of the arms as I found that the motors when mounted were not straight. Also, be careful tightening the M3 bolts into the brass inset bushes used to connect the arms to the glass fibre plates. These can easily be stripped; so don't tighten them too hard and make sure you use loctite. HK do sell replacement crab-gear struts for this frame but for some reason, these are in various colours other then black (not that it's a problem). It would have been nice to have a third frame tier, or at least stand-offs provided for a power distribution board to clean up the "dirty" frame area. If you intend to use the crab gear, you will need to think about the area this consumes on the lower mounting plate front/rear extensions; especially if you want to mount a camera or anything else in these areas. I'm just waiting on stock now to buy another for spare parts. Hope this helps someone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Z600 is a nice, fairly robust frame. There are some issues with regard to alignment of the arms as I found that the motors when mounted were not straight. Also, be careful tightening the M3 bolts into the brass inset bushes used to connect the arms to the glass fibre plates. These can easily be stripped; so don't tighten them too hard and make sure you use loctite. HK do sell replacement crab-gear struts for this frame but for some reason, these are in various colours other then black (not that it's a problem). It would have been nice to have a third frame tier, or at least stand-offs provided for a power distribution board to clean up the "dirty" frame area. If you intend to use the crab gear, you will need to think about the area this consumes on the lower mounting plate front/rear extensions; especially if you want to mount a camera or anything else in these areas. I'm just waiting on stock now to buy another for spare parts. Hope this helps someone.

Good frame if you're willing to put some work into it. First off I had to get M3 x 8 screws to mount the motors. A bit of a pain since these screw sizes are kind of an odd ball screw in the USA. Second when the motors where mounted I noticed they were not level so after 30 min with a bubble-leveler and some plastic shim stock I got that straightened out. After all that it flew great using the KK2.1.

So basically you get what you pay for. Its a cheap frame you can throw motors onto and it will work, just not very well. If you put in a little time leveling everything you'll be much happier with it. My only complaint is that it doesn't have a PCB base.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame if you're willing to put some work into it. First off I had to get M3 x 8 screws to mount the motors. A bit of a pain since these screw sizes are kind of an odd ball screw in the USA. Second when the motors where mounted I noticed they were not level so after 30 min with a bubble-leveler and some plastic shim stock I got that straightened out. After all that it flew great using the KK2.1.

So basically you get what you pay for. Its a cheap frame you can throw motors onto and it will work, just not very well. If you put in a little time leveling everything you'll be much happier with it. My only complaint is that it doesn't have a PCB base.

Nice frame... But need M3 x 10 for motor screw

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice frame... But need M3 x 10 for motor screw

Customer files
No File Name Download [3313]
No File Name Download [3569]
No File Name Download [1275]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!