MultiWii Lite V1.0 Flight Controller w/FTDI

• Overall
• Quality
• Value

Customer Rated

Jun 23, 2016

Picture is ok, text is not ok. This one doen not use a 6050 and the board is 50x50.
One board is death on arrival.

• Overall
• Quality
• Value

Customer Rated

Oct 06, 2013

I have two of these units and find them easy to use and set up. The ability to update firmware and adjust programming is a great feature once you have all downloads. Arduino and Multi Wii. The Gui is excellent.Self levelling must be activated in Arduino instructions here on this website. Is working great in two quads Talon V2 and home built unit. Great product if your willing to do research.

• Overall
• Quality
• Value

Customer Rated

Apr 30, 2013

Italiano
Ottima, come tutte le CRIUS, economica e prestante. Tuttavia se con la versione 2.1 di Multiwii tutto funziona a dovere ho un grosso problema con la versione 2.2. In pratica anzich spegnersi quando se ne da il comando tutti i motori salgono di giri di colpo fino a sollevare il multirotore col risultato di avere un incidente sicuro specialmente se si impreparati. Solo dopo vari tentativi di spegnimento i motori si fermano.
Quindi sconsiglio caldamente di caricare la ver. 2.2 di Multiwii, a meno di capire qual' il problema e di averlo risolto.

ENGLISH
Excellent, like all CRIUS, economic and handsome. However, if with version 2.1 of MultiWii all goes well I had a big problem with version 2.2. In practice, instead of turning, while giving this command, all engine climb speed of shot to lift the multicopter with the result of having an accident, dangerous especially if you are unprepared. Only after several attempts to switch off the motors stop.
Therefore strongly advise against loading the ver. 2.2 of MultiWii, unless you understand what the problem and have it fixed.

• Overall
• Quality
• Value

Customer Rated

Feb 01, 2013

Issue with 2.1 config for the sensor on this board. Had to edit sketch and reflash. Great board non the less.
Quad wanted to just flip over, no roll or pitch responce. May be an issue with multiwii 2.1 fw config for the sensors on this board. Sketch edited and reflashed. Works fine. Great little flight controller at a good price.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 17, 2012

THIS IS MY FIRST MULTI ROTOR CONTROLLER. JUDGING BY THE EASE THAT THIS WAS TO PROGRAM AND HOOK UP, THIS WAS ANOTHER TOOL THAT MAKES LIFE EASIER.

• Overall
• Quality
• Value

Customer Rated

Dec 02, 2012

Works OK but you need to recompile the firmware since pitch and roll sensors are in wrong direction.
Add to def.h:

#if defined(HKING)
#define MPU6050
#define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = Y; gyroADC[PITCH] = -X; gyroADC[YAW] = -Z;}
#define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -X; accADC[PITCH] = -Y; accADC[YAW] = Z;}
#endif

and the define this board in config.h

• Overall
• Quality
• Value

Customer Rated

Nov 08, 2012

Unusable due to lack of even basic instructions , for me anyway .
If you don't already know how to set this board up suggest you choose different one .

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 28, 2012

This is nice. Get your wii on.

• Overall
• Quality
• Value

Customer Rated

Sep 05, 2012

Esta placa tem o basico, giroscopio e acelerometro, oque jah eh ohtimo, ainda tem a vantagem de poder agregar mais sensores posteriormente, coisa que a KK2 nao tem.
Existe um forum em portugues com uma galera ohtima que entende muito sobre Multiwii em www.multirotores.com.br