New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

1.2GHz 100mW Video zender en ontvanger Combo

1.2GHz 100mW Video zender en ontvanger Combo

Discontinued Product

Please continue searching for a similar product.
Gewicht:
18 g
SKU:
381000151
WANT FREE SHIPPING? Click here to find out more!

Dit is de perfecte maat voor Micros en speciale applicatie waar je de betere indringende kracht en het bereik van de 1,2 GHz band nodig heeft, maar de grootte is beperkt. De set wordt aangepast en afgestemd op feilloos samen te werken en beschikt over 4 kanalen selectiviteit. Hun vermogen zo laag om te werken als 3.3v maakt dit perfect voor enkele cel toepassingen. Tijd om mode enkele spion versnelling of micro FPV vliegen actie !!

Video Zender Specs:
Voltage: + 3.3 ~ 5.0V
Stroomverbruik: 85mA, Max
Werkende Temperatuur: -10 ~ + 70 ºC
Het overbrengen van frequentiebereik: 1280 ~ 1360MHz
Voltage Standing Wave Ratio: 2: 1
Modulatie systeem: FM / PLL
ANT-uitgang impedantie: 50Ω, Typ
LO Frequentie stabilisatie: ± 100 kHz
LO Frequentie Precisie: ± 200kHz
LO controle: PLL
Zendvermogen: 17dBm (100mW)
Video-ingang impedantie: 75Ω, Typ
Video Polariteit: Negatief
Video Frequentie: ± 5 dB, Max. 50Hz ~ 6MH z
Kanalen: 1280, 1300, 1320, 1340Ghz
Afmetingen: 18 x 8 x 3,5 mm
Gewicht: 2 gram (met connector)

Receiver Specs:
Voltage: + 3.3 ~ 5.0V
Stroomverbruik: 120mA, Max
Werkende Temperatuur: -10 ~ + 70 ºC
Het ontvangen van frequentiebereik: 1280 ~ 1340MHz
Voltage Standing Wave Ratio: 2: 1
Demodulatie systeem: FM / PLL
ANT Input impedantie: 50Ω, Typ.
LO Frequentie stabilisatie: ± 100 kHz
LO Frequentie Precisie: ± 200kHz
LO controle: PLL
Input LO lekken: -55dBm
Ontvangende Gevoeligheid: - 85dBm
Input Level Bereik: -85 dBm ~ + 5 dBm
Video Output impedantie: 75Ω, Typ.
Video Output Level: 1 Vp-p, Typ.
Video Polariteit: Negatief
Video Frequentie: ± 5 dB, Max. 50hz ~ 6MHz
Differential Gain: ± 5%, Max
Differential Phase:. ± 5 DEG, Max
Kanalen: 1280, 1300, 1320, 1340
Maat: 26.8 x 23.2 x 2.8mm

  • Sku 381000151
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 18.00
  • Lengte 60.00
  • Breedte 10.00
  • Hoogte 50.00
  • 1.2GHz Video Transmitter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very light VTX - only 1.1g with shorter lead & smaller plug. have had some success with a WLToys v212 & 808 #16 camera, now trying with a 2g camera on a V252 (Hubsan X4 clone). Would buy another if they ever come back in stock !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very light VTX - only 1.1g with shorter lead & smaller plug. have had some success with a WLToys v212 & 808 #16 camera, now trying with a 2g camera on a V252 (Hubsan X4 clone). Would buy another if they ever come back in stock !

When you keep in mind this tiny transmitter's intended use (close range) and it's 19.99 price, it's just great! Yes the soldering is very weak but you're going to need great soldering skills for FPV anyway. It fits great in an SD card case and it's a blast for micro FPV at close range. See a couple of pictures I posted under the Files tab.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When you keep in mind this tiny transmitter's intended use (close range) and it's 19.99 price, it's just great! Yes the soldering is very weak but you're going to need great soldering skills for FPV anyway. It fits great in an SD card case and it's a blast for micro FPV at close range. See a couple of pictures I posted under the Files tab.

very very good i checked it all over my house with alot of walls and it is working bestter than boscam 5.8 200 mw the picture seems to be stable and powerful just be carefull with wiring and polarity

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very very good i checked it all over my house with alot of walls and it is working bestter than boscam 5.8 200 mw the picture seems to be stable and powerful just be carefull with wiring and polarity

Soldering quality sucks badly on RX. It came with 2 loose wires (video and GND). REALLY hard to solder them back.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Soldering quality sucks badly on RX. It came with 2 loose wires (video and GND). REALLY hard to solder them back.

Neat little set, if you can run 1340MHz in your area. HobbyKing needs to provide instructions on how to change channels, since they're listed in the product specs for the vTx and vRx. Otherwise remove them and advertise as a single channel set - 1340.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Neat little set, if you can run 1340MHz in your area. HobbyKing needs to provide instructions on how to change channels, since they're listed in the product specs for the vTx and vRx. Otherwise remove them and advertise as a single channel set - 1340.

Operating frequency is 1340 MHz,(I uploaded picture- checked with frequency analyzer) unless there's a way to change channels with the solder pads, but I've read you might fry it if you try to change channels with pads. It takes a few connect/disconnect cycles for the Rx to get and send the video signal to a screen. "Channels: 1280, 1300, 1320, 1340Ghz" description is misleading. Perhaps someone can figure out how to change channels on Tx. I tried the Rx with a 1280MHz Tx and it would tune to 1280MHz, seems it defaults to 1340MHz, pitty that's just outside the legal amateur frequency in the US and even Int'l:
1300-1350
AERONAUTICAL RADIONAVIGATION
5.337
Radiolocation G2
5.337 The use of the bands 1300-1350 MHz, 2700-2900 MHz and 9000-9200 MHz by the aeronautical radionavigation service is restricted to ground-based radars and to associated airborne transponders which transmit only on frequencies in these bands and only when actuated by radars operating in the same band.

5.337A The use of the band 1300-1350 MHz by earth stations in the radionavigation-satellite service and by stations in the radiolocation service shall not cause harmful interference to, nor constrain the operation and development of, the aeronautical-radionavigation service

I tried running at same time with a 1280MHz Tx and it was possible to receive both signals with little interference at close range

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Operating frequency is 1340 MHz,(I uploaded picture- checked with frequency analyzer) unless there's a way to change channels with the solder pads, but I've read you might fry it if you try to change channels with pads. It takes a few connect/disconnect cycles for the Rx to get and send the video signal to a screen. "Channels: 1280, 1300, 1320, 1340Ghz" description is misleading. Perhaps someone can figure out how to change channels on Tx. I tried the Rx with a 1280MHz Tx and it would tune to 1280MHz, seems it defaults to 1340MHz, pitty that's just outside the legal amateur frequency in the US and even Int'l:
1300-1350
AERONAUTICAL RADIONAVIGATION
5.337
Radiolocation G2
5.337 The use of the bands 1300-1350 MHz, 2700-2900 MHz and 9000-9200 MHz by the aeronautical radionavigation service is restricted to ground-based radars and to associated airborne transponders which transmit only on frequencies in these bands and only when actuated by radars operating in the same band.

5.337A The use of the band 1300-1350 MHz by earth stations in the radionavigation-satellite service and by stations in the radiolocation service shall not cause harmful interference to, nor constrain the operation and development of, the aeronautical-radionavigation service

I tried running at same time with a 1280MHz Tx and it was possible to receive both signals with little interference at close range

Great little kit if your after a very lightweight fpv setup. Works well with the micro camera with led in the recommended accessories.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little kit if your after a very lightweight fpv setup. Works well with the micro camera with led in the recommended accessories.

Customer files
Shrink Wrap 1 Download [2027]
Shrink Wrap 2 Download [2646]
Shrink Wrap 3 Download [2359]
RX Antenna Modification Download [333]
Setup 1 Download [482]
1280MHz VTx Download [292]
Operating Frequency Download [1775]
1280MHz VRx Download [1818]
RX protection in a SD card box Download [1931]
Save your RX 1 Download [1447]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save