Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

1/3-inch SONY CCD-videocamera (NTSC)

Generating Links

1/3-inch SONY CCD-videocamera (NTSC)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 33,41
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
9171000006
Geen verzendkosten? Klik hier meer leren!
De camera maakt gebruik van een hoge kwaliteit glas lensed SONY CCD-systeem.
Inbegrepen.
1 x Sony CCD 1 / 3inch Camera
1 x kabelboom
1 x Lens cap

Camera spec.
Afbeelding apparaat: 1/3-inch Sony Super HAD kleuren CCD
Pixel: 752 x 582 (NTSC)
Synchronisatie: Interne synchronisatie
Horizontale resolutie: 520TV Lines
Minimale verlichting: 0.1Lux / F1.2
S / N Ratio: Meer dan 48 dB (AGC OFF / B / W OFF)
Witbalans: Auto Tracking White Balance
Auto tegenlichtcompensatie: aan / uitschakelbare
Lens: 3.6-6mm
Ingangsspanning: DC12V
Elektrische stroom: 80MA ± 5MA
Elektronische sluiter: Auto
PAL: 1/50 tot 1 / 100.000 seconds
Video-uitgang: 1,0 Vp ~ p75Ω
Operatie Temp .: -10 ~ + 50?
Afmetingen: 38 x 38
Voeding: 12V / 150mA
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

itguy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2014

I received this camera and the picture is great, not as good as 600TVL but acceptable for FPV. I give 3 stars due to the Red and White wires being wired incorrectly. See files tab for correct wiring. Luckily I didn't fry the camera with the backwards wiring.

nau53 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 04, 2014

Using that for my TBS Disco. Had to switch the wires to get working. Otherwise - pretty good camera.

Leocopter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2014

Very good image quality for the price. Overall good product. It would be nice if HK sold a case for it. To protect the electronics, I started putting hot glue on the circuit board. Its better than nothing.

ninjatoast | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 28, 2013

Great little camera for the price. Very good picture quality and good low light performance.

Nyana | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 09, 2013

Aplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusqweqwwewe

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 29, 2013

good camera for the money, wish the board could be smaller.

Spydamonky | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2013

This camera is great! It has a fantastic image with plenty of saturation. I currently have it on my RiteWing Zypher ZII and there is no noticeable delay in the camera feed which makes for a great flying experience. I have however removed the plug and instead soldered the wires directly into the back of the camera, because the way I was mounting it put a lot of strain on the plug. I would recommend it to anyone!

Supergoldfish | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 10, 2013

Pretty good camera. I've upgraded mine with a larger FOV lense. With there was better documentaion with this, as I think there are onboard settings, but nothing to tell you how to use them.

modifiedmustang | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 02, 2013

Very nice camera. It's a lot clearer than I pictured. Simple to hook up, glad it's 12v, and fits the pan-tilt mount perfectly.

Thomas Nelson | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 21, 2013

Received mine in early February 2013. The connector was wired correctly from the factory. Works great!

A little awkward to mount given its shape and exposed IC board, but no biggie for anyone already used to scratchbuilding and/or FPVing

  1. 1
  2. 2
  3. 3
Klantbestanden
Correct wiring Download [1909]
Orientation of camera Download [559]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!