New Items Nieuws Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

182 Seaplane 1,5 meter Plug-n-Fly (optioneel praalwagens)

182 Seaplane 1,5 meter Plug-n-Fly (optioneel praalwagens)

Shipped From:
  • USA
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
C-182
WANT FREE SHIPPING? Click here to find out more!
Dit is een enorme Foamie!
De 182 1.5M is een grote maquette met bestuurbare neuswiel of praalwagens. Inbegrepen bij de set is een standaard landingsgestel set of u kunt de landing praalwagens (niet meegeleverd) voor extra water het landen en opstijgen opwinding te installeren. Ook inbegrepen is een optioneel flap-systeem dat kan worden geactiveerd met twee extra servo's (niet inbegrepen).
Alles wat je nodig hebt is je eigen Rx en de batterij klaar te zijn om te vliegen. * Plug-n-Fly *

Spec.
Lengte:
1196mm
Spanwijdte: 1500mm / 59.05in
Propeller: 1060 x 3 messen
Wing belasting: 46.2g sp.dm
Flying Gewicht: 1622g
Motor: 3715 Brushless outrunner
ESC: 50A w / BEC
Batterij: 14.8V 2200mAh 4S1P (niet inbegrepen)
Servo: 17g x 2, 9g x 2 (Quality servo's, met nauwkeurige controle.)
Max stuwkracht: 1750g

Vereist.
4 kanaals Tx & Rx
14.8V 2200mAh 4S1P Lipo
* Opmerking: Floats apart verkocht.
  • Sku C-182
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 4490.0000
  • Lengte 895.00
  • Packaging Width 275.00
  • Hoogte 335.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

All other comments are true. Weak nose wheel mounting, loose screws, a bad servo. Beef up the nose wheel mount and carefully check all screws and connections. Great to fly though, only required minimal trim and looks awesome in the air and what a graceful lander.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All other comments are true. Weak nose wheel mounting, loose screws, a bad servo. Beef up the nose wheel mount and carefully check all screws and connections. Great to fly though, only required minimal trim and looks awesome in the air and what a graceful lander.

Build is straight foward, had trouble with esc and motor. Sent back to warhouse for checking, was all Ok, turned out to be my Radio, and had to use a lot of motor sub trim to make low motor work and arm esc. Was Ok with Spektrum, but JR tx, needed the sub trim to fix it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Build is straight foward, had trouble with esc and motor. Sent back to warhouse for checking, was all Ok, turned out to be my Radio, and had to use a lot of motor sub trim to make low motor work and arm esc. Was Ok with Spektrum, but JR tx, needed the sub trim to fix it.

This plane is not EPO. It does mark very easily. The rudder / steering servo was stripped while testing after build. Replaced with metal gear - much better. Buy your own spinner - this one is foam.I added CF to struts and wings. Set up flaps. Have to make hinges or install them (no hardware for flaps supplied in kit) using spare 9g servos. Used 4s 2200 - ran about 30pcnt throttle after take off and trimmed out. 3s would probably be fine. Tested flaps up high and then brought plane in for landing. At full flaps plane just floats in for landing. No damage - wheels all intact. Only EPS plane I have so hope it never has a big crash as it may have to be binned...Also have the floats but won't be testing those for a while. Plane is very big and very stable. Concrete and very short grass landings are no problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is not EPO. It does mark very easily. The rudder / steering servo was stripped while testing after build. Replaced with metal gear - much better. Buy your own spinner - this one is foam.I added CF to struts and wings. Set up flaps. Have to make hinges or install them (no hardware for flaps supplied in kit) using spare 9g servos. Used 4s 2200 - ran about 30pcnt throttle after take off and trimmed out. 3s would probably be fine. Tested flaps up high and then brought plane in for landing. At full flaps plane just floats in for landing. No damage - wheels all intact. Only EPS plane I have so hope it never has a big crash as it may have to be binned...Also have the floats but won't be testing those for a while. Plane is very big and very stable. Concrete and very short grass landings are no problem.

nice flying plane, everthing was included. 3 weeks shipping to the Neterlands

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice flying plane, everthing was included. 3 weeks shipping to the Neterlands

ment to give this plane 5 crowns as eavry hit the mark only problem is hobbyking doesnt sell floats in england as yet hurry up hobbyking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ment to give this plane 5 crowns as eavry hit the mark only problem is hobbyking doesnt sell floats in england as yet hurry up hobbyking

bought this plane 2 weeks ago lovely bit of kit for 70 odd pounds went 2 gether very easily except for wings needed a bit of wriggling about no problem took if for its maiden flight this morning put a 11x6 prop on flew ok slightly under powerd changed prop for a 13x6 perfect lot more power better handling very nice plane hk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought this plane 2 weeks ago lovely bit of kit for 70 odd pounds went 2 gether very easily except for wings needed a bit of wriggling about no problem took if for its maiden flight this morning put a 11x6 prop on flew ok slightly under powerd changed prop for a 13x6 perfect lot more power better handling very nice plane hk

. , . . : , , &#107

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. , . . : , , &#107

Where can i get a manual for ESC/BEC for this plane?

I have trouble throttle-setting for this Cessna plane.

It is above my expectation. Looks great, better quality

then i had expected! I hope it flys well!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Where can i get a manual for ESC/BEC for this plane?

I have trouble throttle-setting for this Cessna plane.

It is above my expectation. Looks great, better quality

then i had expected! I hope it flys well!!!

I've had this plane a month now and flown it about 12 times. I'm new at the RC thing this year, but this plane has been a pretty easy one to fly and a lot of fun. When I first got it, 2 of the servos went out before my first flight. And the front wheel assembly is really poorly made and bent after a couple easy landings. The BIGGEST NEGATIVE is no replacement parts from HK. So you better be real sure you're not going to crash to hard. I've already had to rig some things up by myself to keep it flying. Which was no big deal and I enjoy that stuff. But just a WARNING NO REPLACEMENT PARTS so far from HK. And their 24 hr support center is not helpful in pointing you in the right direction. Enjoy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've had this plane a month now and flown it about 12 times. I'm new at the RC thing this year, but this plane has been a pretty easy one to fly and a lot of fun. When I first got it, 2 of the servos went out before my first flight. And the front wheel assembly is really poorly made and bent after a couple easy landings. The BIGGEST NEGATIVE is no replacement parts from HK. So you better be real sure you're not going to crash to hard. I've already had to rig some things up by myself to keep it flying. Which was no big deal and I enjoy that stuff. But just a WARNING NO REPLACEMENT PARTS so far from HK. And their 24 hr support center is not helpful in pointing you in the right direction. Enjoy!

Habe das Flugzeug vor einem Monat erhalten. Nach dem Zusammenbau ist beim testen das Servo fr das Hoehenruder ausgestiegen. ebenfalls ein Servo fr die Landeklappen. Habe folgedessen auf Grund der vielen negativen Reviews saemtliche Servos und den Regler ausgetauscht (Hoehen- und Seitenruder-Servos neu = Corona CS238MG Metal Gear Servo 4.6kg/ 22g/ 0.14sec, Landeklappen- und Querruder-Servos = Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec, Regler = HobbyKing Red Brick 50A ESC). Fliegt sehr schoen, mit voll ausgefahrenen Flaps landet sie im Schritt-Tempo. Fliege sie mit einem 4s 2'200 mAh Lipo, Prop ist ein 2-Blatt 11x5,5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe das Flugzeug vor einem Monat erhalten. Nach dem Zusammenbau ist beim testen das Servo fr das Hoehenruder ausgestiegen. ebenfalls ein Servo fr die Landeklappen. Habe folgedessen auf Grund der vielen negativen Reviews saemtliche Servos und den Regler ausgetauscht (Hoehen- und Seitenruder-Servos neu = Corona CS238MG Metal Gear Servo 4.6kg/ 22g/ 0.14sec, Landeklappen- und Querruder-Servos = Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec, Regler = HobbyKing Red Brick 50A ESC). Fliegt sehr schoen, mit voll ausgefahrenen Flaps landet sie im Schritt-Tempo. Fliege sie mit einem 4s 2'200 mAh Lipo, Prop ist ein 2-Blatt 11x5,5

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
Manual for E-do Pro-50A Brushless ESC wi Download [396]
Spanish Manual E-DO Pro-50A Brushless ES Download [105]
English Manual E-DO Pro-50A Brushless ES Download [103]
cessna 1 Download [76]
My cessna 2 Download [107]
My cessna and the bomb Download [70]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking