New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

2.4Ghz A-FHSS Compatible 4CH micro-ontvanger (Hitec Minima compatibel)

2.4Ghz A-FHSS Compatible 4CH micro-ontvanger (Hitec Minima compatibel)

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 15,53
status:
In voorraad
Gewicht:
20 g
SKU:
236000018
WANT FREE SHIPPING? Click here to find out more!

Deze ontvangers zijn een goede optie voor gebruikers van Hitec A-FHSS radiosystemen. Ze bieden uitstekende prestaties en extra functies. Dit is een parkfly micro-ontvanger biedt een scala van> 300 meter en maakt gebruik van standaard servo-connectoren.

Verenigbaarheid:
Compatibel met Hitec Minima serie 2.4Ghz A-FHSS zenders

Kenmerken:
• Hitec Minima 2.4Ghz A-FHSS Compatible
• Ondersteunt PPM en RSSI Output
• Programmeerbare Failsafe

specs:
Aantal kanalen: 4
Operating Voltage Range: 3,0 V ~ 7.2V
Stroomverbruik: 20mA
Bereik:> 300m
Afmetingen: 30x19x8mm
Gewicht: 3.4g

* Opmerking: Dit apparaat is niet ontworpen, gefabriceerd of ondersteund door Hitec, noch is het een kopie van een Hitec-ontvanger.

  • Sku 236000018
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 20.00
  • Lengte 80.00
  • Breedte 20.00
  • Hoogte 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have several of these receivers and have bound them to my Hitec Aurora9 and Flash7 transmitters. I have flown them in my Slow Stick and turned it into a little dot in the sky with never a problem with range or brounouts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have several of these receivers and have bound them to my Hitec Aurora9 and Flash7 transmitters. I have flown them in my Slow Stick and turned it into a little dot in the sky with never a problem with range or brounouts.

This is a really bad product, I asked for a replacement as the first one did not work (see my earlier review) I got the replacement, was able to bind with my TX (spectra module). However it would loose signal intermittently. I tried everything I could read in the net, updated software of my TX, bind it on different modes, kept it on for so many minutes but with the same results. Then I bought 2 original Hitec Minima (blue) RX and under similar conditions both hitec worked flawlessly. Tried it again with this RX and still will loose signal between 5 to 30 seconds. I've wasted so much time with this thing, don't make the same mistake I did.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a really bad product, I asked for a replacement as the first one did not work (see my earlier review) I got the replacement, was able to bind with my TX (spectra module). However it would loose signal intermittently. I tried everything I could read in the net, updated software of my TX, bind it on different modes, kept it on for so many minutes but with the same results. Then I bought 2 original Hitec Minima (blue) RX and under similar conditions both hitec worked flawlessly. Tried it again with this RX and still will loose signal between 5 to 30 seconds. I've wasted so much time with this thing, don't make the same mistake I did.

After successful binding with my TX, signal/LED will get lost/turn off after a few seconds or when it gets any kind of vibration. So when you rev up the motor, the signal will go off as the motor revs. Shipped it back to HK and asked for a replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After successful binding with my TX, signal/LED will get lost/turn off after a few seconds or when it gets any kind of vibration. So when you rev up the motor, the signal will go off as the motor revs. Shipped it back to HK and asked for a replacement.

Neat little Rx. I'm using it on a Gaui X3 with a microbeast FBL unit. The connection is PPM. It's just like using a satellite on a Spektrum Rx, as there is just a single lead. All works well, but the Rx does need to be bound with the Tx a good couple of meters away and the Rx will flood if you get within about a meter of the heli, causing the servos to move erratically. Great value, nicely made and well deserving of 5 stars. P.S. a big thanks to Simon for making this possible. I hope we see some telemetry versions in the future. :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Neat little Rx. I'm using it on a Gaui X3 with a microbeast FBL unit. The connection is PPM. It's just like using a satellite on a Spektrum Rx, as there is just a single lead. All works well, but the Rx does need to be bound with the Tx a good couple of meters away and the Rx will flood if you get within about a meter of the heli, causing the servos to move erratically. Great value, nicely made and well deserving of 5 stars. P.S. a big thanks to Simon for making this possible. I hope we see some telemetry versions in the future. :)

pour reception avion indoor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pour reception avion indoor

Recieved 3 of these 4channel minima compatibles, quality just fine as the other versions. Had no trouble at all with binding, these are perfect for smaller aircrafts but with wider range than the smaller 5 channel types. These come in a plastic bag with a "Hitec V8R4" label and includes a manual and 2 jumpers. Very happy with these items, made 2 photo's that I'll upload to the files tab. Thanks Simon, FrSky and Hobbyking !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Recieved 3 of these 4channel minima compatibles, quality just fine as the other versions. Had no trouble at all with binding, these are perfect for smaller aircrafts but with wider range than the smaller 5 channel types. These come in a plastic bag with a "Hitec V8R4" label and includes a manual and 2 jumpers. Very happy with these items, made 2 photo's that I'll upload to the files tab. Thanks Simon, FrSky and Hobbyking !

Customer files
Next to Optima 7.jpg Download [196]
Receivers.jpg Download [264]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!