25.2x26mm 2200kv borstelloze Outrunner Motor

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 14, 2016

Gehaeuse aus Kunststoff - Gewicht 25g inkl. 6cm Kabel,

Lochradius am Befestigungsflansch 15mm mit 2,5mm Bohrungen(hat aber auch aber auch 2mm Bohrungen 2 mit 7,75mm und 2 mit 8,75mm Radius - waere geignet fr 2,5mm Gewinde und Befestigung von hinten)

Motorgehaeuse 26mm Durchmesser,

Freie Achse 3mm Durchmesser 5,2mm lang - reicht fr Mitnehmerbefestigung,

Propsaver von 5,5 auf 9,5mm mit 2 2mm Schrauben

• Overall
• Quality
• Value

Customer Rated

Aug 22, 2012

I'm not sure if there is a wiring problem like the other reviewer mentioned. But I can be sure that 3 of my 4 motors failed. Now they run at 1/2 speed compared to the 4th good motor. The electric power is instead used to make them hot. When I took one apart I am certain 3 of the 10 tiny magnets are demagnetized completely. The heat is a symptom of the degmagnetized motor. But it could also be a cause of it? Not sure which came first. Certainly the motor will not run fast with 3 bad magnets. This happened within 30 days of my purchase.

HobbyKing will you help me?

• Overall
• Quality
• Value

Customer Rated

Aug 22, 2012

I bought 4 of these and the plywood frame since the 535 frame kit had been out of stock for months. One of the motor had an internal short. The root cause is probably someone decided to cut the solder joint at the star winding common point short and capped with heat shrink. It ended up only 4 or 5 wires out of 15 were actually soldered together at the cut short joint. With only 1/5 of the copper in service, it quitted in mid throttle under load and smoked on further test. Wiring is shortcircuiting between 2 poles.

All 4 motors came with shafts not fully inserted. And one has a very uneven rotor ring. Obviously we had some QC problem here.

Not sure what kind of warranty I can get. It is too expensive to ship anything back for replacement.

• Overall
• Quality
• Value

Customer Rated

Mar 15, 2012

This is the motor that comes with the super mini quad HKing sells. After 2 weeks it arrived at my house with 4 of these motors out of the 4 1 of them was no good but I am impressed with the other 3. They are super light for the power With a 12A esc and a 6x5 e prop I put them to the test on 2s and 3s. Lots of power and they keep very cool. Only down side is they are not balanced very well. But I have already ordered more