325mm Flybarless Hoge kwaliteit Carbon Fiber Main Blades

• Overall
• Quality
• Value

Certified Buyer Rated

May 09, 2014

The blades is very good. Really happy with mine.

• Overall
• Quality
• Value

Customer Rated

Feb 07, 2014

Outstanding blades. I've bought 4 sets over the last year, they usually need a bit of tape to get balanced. I use them on a Blade 450 fbl and an HK 450 pro. Airfoil is pretty good, some sets of blades weigh 23g each some sets weigh 21g each, but they are always paired within half a gram of eachother (so different sets of these blades may perform differently). You need spacers/shims to make them fit on the Blade 450 grips. Each package of blades come with 2 spacers and you'll need 4 total to fit them on any blade 450.

• Overall
• Quality
• Value

Customer Rated

Sep 17, 2013

looks terrible! should be labeled C or D-finish even! finish is terrible compared to other rjx b-finish i purchased here

• Overall
• Quality
• Value

Certified Buyer Rated

May 26, 2013

ok I have tryed many a main blade so just wait for a full review.

• Overall
• Quality
• Value

Certified Buyer Rated

May 23, 2013

Excelentes palas para helicopteros de la serie 450!...Sobre todo para modelos con flybarless!

• Overall
• Quality
• Value

Customer Rated

May 15, 2013

The blades come well packaged in a nice foam casing. So they are well protected. They look very nice and are well painted. A real plus for the blades.

I had the balance the blade with 8cm (about 3 inches) of tape on the center of gravity. This is too much for a "high quality" blade.
I use them on a Beam E4 FBL. The overall flight is good. I had to reduce the swashplate gain a bit (other blades are radix fbl) to eliminate a slight wobbling on nick. The react good to cyclic and collective pitch inpus and give a good sound. I already feared it and, yes:
they tend to give a bit amount of roll right input when pitching (not caused by vibrations) and the helicopters oversteers when giving much pitch after a looping (2550 and 2900 RPM - 12 degree of pitch , 8 degree cyclic pitch). This show that the blades have too much of forerun/are leading too much (i can't find the proper english word, sorry!). I compared it to my radix v2 and it shows that they have about 3mm more forerun. This is too much for an FBL Blade!! and is also the reason for the good pitch input and oversteering. Sorry Hobbyking, but you have to work on this.
However: If you're not into speeding or flying really fast loops you will hardly notice this at all. It will however put more strain to your servos

• Overall
• Quality
• Value

Customer Rated

May 14, 2013

Very good blades, mine came wrapped well and spotless.
Really happy with mine. Must still test performance.