New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

4112-320KV Turnigy Multistar 22 Pole borstelloze Multi-Rotor Motor met extra lange Leads

4112-320KV Turnigy Multistar 22 Pole borstelloze Multi-Rotor Motor met extra lange Leads

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 37,15
status:
In voorraad
Gewicht:
213 g
SKU:
9392000033-0
WANT FREE SHIPPING? Click here to find out more!

Op zoek naar de ultieme macht systeem voor uw volgende Multi-rotor project? Zoek niet verder!
De Turnigy Multistar outrunners zijn ontworpen met een ding in het achterhoofd - het maximaliseren van Multi-rotor prestatie! Ze zijn voorzien van high-end 45SH magneten, hoge kwaliteit NMB lagers en High Polen telt voor minder lawaai, glad en responsieve vermogen en verhoogde efficiëntie. Ze hebben aangepaste motor montage en al zijn precisie in evenwicht gehouden voor de goede werking, zijn deze motoren specifiek ontworpen voor multi-rotor gebruik en zijn niet gebaseerd op het vliegtuig motoren.

De 4112-320KV MultiStar is bijna te mooi om te vliegen! Het vakmanschap en detail in deze motor is op een geheel nieuw niveau. Het is voorzien van vulstukken en pre-loaded NMB lagers en heeft een 570mm lange hoge grad silicium draden. Hij heeft dual prop montage, ofwel een bout op 6mm as prop hub of de 12mm afstand bout gooide prop bevestiging met een precisie bovenste drukring voor een onbeperkt aanbod van rekwisieten. En met 22P24S pole tellen haar vlotte efficiënte en heeft tal van het koppel.

Multistar is het vereenvoudigen van de wereld van de Multi-Rotoren met hun speciaal gebouwde productlijn en het nemen van de giswerk uit uw setup.

specs:
KV (RPM / V): 320
Cellen Lipo: 4-8s
Max Watt: 660W
Max Amps: 20A
Onbelast Current: 0.5A / 10V
Internal Resistance: .172ohm
Aantal polen: 22P24S (22poles 24 stators)
Afmetingen (Dia.xL): 46,6 x 29,8 mm
Motor Shaft: 5mm
prop schacht: 6mm bout op hub of 12mm gat naar gat voor bout gooide stijl props
Gewicht: 147g
bolt hole spacing: 19mm * 25mm

  • Sku 9392000033-0
  • Brand MultiStar
  • Gewicht ( g) 213.00
  • Lengte 85.00
  • Breedte 45.00
  • Hoogte 60.00
  • Kv ( tpm / v ) 320.00
  • Max Currents (A ) 20.00
  • Resistance ( mh ) 172.00
  • Max Voltage ( V ) 30.00
  • Vermogen ( W) 660.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 30.00
  • C Diameter ( mm ) 47.00
  • Kan Lengte D ( mm ) 15.00
  • Totale lengte E ( mm ) 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

You can't touch these for 40 bucks. I have more than 3 dozen flying in a bunch of different frames and NONE have ever failed. Take a 680 pro Tarot frame, 6 of these, 6 opto 45 amp esc's and a 5000 mah nano-tech battery, 14x5.5 props and it gets 19 minutes of time flying, not hovering. Even with a gimbal, it still gets close to 15. It would run much larger props but not on this frame, 14 is it. They will lift most anything and 8 of them on a 1140mm frame makes a super stable photography platform. With a WooKong controller and a decent camera, hollyweird quality pictures. Just right KV for 6S. Runs way under 90 degrees F. Easy on esc's. Work great on a split power system at 8S. So far everything we have tried has worked. I have sunnysky and T-motors as well as DJI, all good, all more expensive and none lasted any longer or performed better. You could say we like these!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You can't touch these for 40 bucks. I have more than 3 dozen flying in a bunch of different frames and NONE have ever failed. Take a 680 pro Tarot frame, 6 of these, 6 opto 45 amp esc's and a 5000 mah nano-tech battery, 14x5.5 props and it gets 19 minutes of time flying, not hovering. Even with a gimbal, it still gets close to 15. It would run much larger props but not on this frame, 14 is it. They will lift most anything and 8 of them on a 1140mm frame makes a super stable photography platform. With a WooKong controller and a decent camera, hollyweird quality pictures. Just right KV for 6S. Runs way under 90 degrees F. Easy on esc's. Work great on a split power system at 8S. So far everything we have tried has worked. I have sunnysky and T-motors as well as DJI, all good, all more expensive and none lasted any longer or performed better. You could say we like these!

I have purchase much more expensive outrunners in the past. Six of these with 16x5.5 props EASILY lifts my 1203mm hex (custom built) at 6.6kg. With 2 Zippy 8000mah batts I get 15 to over 20 mins. of time in the air. I will be testing 4 Turnigy-nano 5000 mah batts. (total weight less than the Zippys). Should get more time in the air. 4 hard test flights and the motors are performing very well. Just slightly warm to the touch after 15 mins.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have purchase much more expensive outrunners in the past. Six of these with 16x5.5 props EASILY lifts my 1203mm hex (custom built) at 6.6kg. With 2 Zippy 8000mah batts I get 15 to over 20 mins. of time in the air. I will be testing 4 Turnigy-nano 5000 mah batts. (total weight less than the Zippys). Should get more time in the air. 4 hard test flights and the motors are performing very well. Just slightly warm to the touch after 15 mins.

Very strong motor! Great for big projects using 6s.
The main concern is about the build process. After using this motors I figure out that some vibration sounds that I was listening, is because some washer was not in the right place making the external part of the motor jump up and down causing the noise.
If you have this motor MAKE SURE to check the internal washers. In all of my 6 motors, 5 of them was missing whashers or they were not in the right place!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very strong motor! Great for big projects using 6s.
The main concern is about the build process. After using this motors I figure out that some vibration sounds that I was listening, is because some washer was not in the right place making the external part of the motor jump up and down causing the noise.
If you have this motor MAKE SURE to check the internal washers. In all of my 6 motors, 5 of them was missing whashers or they were not in the right place!

Two out of four failed within 2 hours of flight. Loose magnets on one and improper shimming on the other. HK is sending me replacements when they get back in stock. When working correctly they can lift a house.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two out of four failed within 2 hours of flight. Loose magnets on one and improper shimming on the other. HK is sending me replacements when they get back in stock. When working correctly they can lift a house.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!