New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

6A 1S Brushless Speed ​​Controller

6A 1S Brushless Speed ​​Controller

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
289000001
WANT FREE SHIPPING? Click here to find out more!

6A 1S Brushless Speed ​​Controller

Spec.
Cellen: 1S (3.7V)
BEC: none
Cutoff Voltage: 3.0V
Frequentie: 8Khz
Werken Current: 6A
Gewicht: 2,8 g
Afmetingen: 18.4x13.3x3.7mm

  • Sku 289000001
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 15.0000
  • Lengte 65.00
  • Packaging Width 5.00
  • Hoogte 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This Esc is a perfect upgrade to brushless for the Genius CP micro helicopter. Not plug and play - the connectors will not fit - but works flawless with the c05 11000kv motor from HK. Programming is easy too, instructions are in the files section.
I soldered all the wires directly to the receiver board, the smaller and - cables are not needed at all (cut them off), the thicker black and red cable go to the battery input points on the board, the thin red wire (signal) goes to the signal point on the receiver and I hardwired (soldered) the motor to the board...
No converter needed, no startup problems, with an 8 tooth pinion plenty of power !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This Esc is a perfect upgrade to brushless for the Genius CP micro helicopter. Not plug and play - the connectors will not fit - but works flawless with the c05 11000kv motor from HK. Programming is easy too, instructions are in the files section.
I soldered all the wires directly to the receiver board, the smaller and - cables are not needed at all (cut them off), the thicker black and red cable go to the battery input points on the board, the thin red wire (signal) goes to the signal point on the receiver and I hardwired (soldered) the motor to the board...
No converter needed, no startup problems, with an 8 tooth pinion plenty of power !

Customer files
manual Download [913]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!