0,90 Size Carbon Fiber bladen met versterkte wortel en evenwichtig tip.
Gewicht: 180g elkeGrip: 12mm
Gewicht ( g)
Not a bad set of blades for the price. One of my blades came with a chip about 1/4" on the tip of the blade. Looks like it might be a thick paint chip. hopefully its salvageable.nicht schlecht fr den preis.
mssen etwas nachgewuchtet werden-
leichte lackabplatzer an den spitzen.
habe sie im assault700Perfect quality for 32 bucks. slight deformations around the bolt holes, but def no show stoppers.blade super,preis sehr gnstig danke!I am flying these on a t rex 700e and I give these blades 5 star for several reasons, the rigidity is good, the length is a true 700mm from bolt hole to tip, nice wide cord, good finish to the blades, and they needed very very small correction for the spanwise cg, cordwise cg was spot on and needed no static balance! tracked nicely, and work great on my 3g fbl 700e...and the PRICE!!! ohy veh! You would be crazy not to buy these!I have flown my Raptor 90 with these blades fitted and they are excellent. I am not into 3D but I do have two high definition cameras, five battery packs (1 x 12v, 1 x 3.7v, 3 x 4.8v)and an FPV system on the helicopter and its all up weight is six and a half kilograms. The blades are as good as the expensive blades with my helicopter's configuration. Highly recommended but you would have to check them out for 3D but they should be OK.Gave these blades a good review, see above. I can now say, they fly OK on a 90, but DO NOT push these blades in moderate to hard 3D, just blew up my Raptor 90 in a boom strike, too long and just too flexible at 710, look to the TIG 690's. The blade is fine to fly around do, loops and rolls but no good for hard pitch + to - collective changes. Hard throttle changes and they will fly out of track also.Really nice blades for the price. HK tracking system works great and the shipping from Hong Kong to USA Midwest was fast and well packed item.
The blades measured from center of bolt whole to very tip are 710mm in length. Put them on a Raptor 60 with 90 tailboom and Thunder Tiger .70. Tracked just fine, had to drop a little pitch as I could bog the .70, will put on R90 later, should be just fine. Put these on a .90 heli and don't look back.use it with TREX600ESP stretch for 3D flight very good for the value...Pa com bom equilibrio e boa qualidade, deve ser respeitada, poi ja vi relatos de que podem nao suportar um 3D muito agressivo.