Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

AD-C5 Micro Motor 4,6 g Gewicht 3700Kv

Generating Links

AD-C5 Micro Motor 4,6 g Gewicht 3700Kv

Prijs:

Now save bespaar € 11,90 € 11,90

Special Price € 3,73 € 3,73

You save bespaar € 11,90 € 11,90

Was  € 15,63

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
AD-C5
Geen verzendkosten? Klik hier meer leren!
Micro 4,6 g outrunner motor details.
Ultradunne statorlaminaties en zilverdraad bleek zeer strak waardoor dit een goed presterende micro-motor!
Gewicht: 4,6 g
Afmetingen: 14 x 12mm
Shaft: 1.5mm
Kv: 3700rpm / v
Prop: 2510 of 3020
opstellingen;
Prop: 2510
Maximum Voltage: 8
Max Amp: 2.8A
Thrust: 90g
Prop: 3020
Max Voltage: 8.4
Max Amp: 1A
Thrust: 49g
  • Kv ( tpm / v ) 3700.00
  • Max Currents (A ) 5.60
  • Resistance ( mh ) 0.03
  • Max Voltage ( V ) 12.00
  • Vermogen ( W) 40.00
  • Shaft A ( mm ) 1.50
  • Lengte B ( mm ) 12.00
  • Can Diameter C ( mm ) 10.00
  • Kan Lengte D ( mm ) 9.00
  • Totale lengte E ( mm ) 19.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Robbie | Geverifieerde koper

  • Overall
  • Quality
  • Value

Quiet, powerful.

Nov 03, 2019

Have been please with the power and smoothness of this little motor.
Very quiet. Ideal for small indoor planes.

humptyfox | Geverifieerde koper

  • Overall
  • Quality
  • Value

runs fine

Oct 28, 2019

wiring is copper, not silver as shown

icahone | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 12, 2014

I bought four of them for my submicro quadcopter.
The motors are terribly out of balance, the bearings are crap as well.
On two of them the bell is jumping up and down during rotation.
These make such a vibration on the frame that the FC is hardly able to keep
the quad flying.
The motor cables are so thin and nearly unable to solder.
I bought many products from HK but this is far the worst of all.

DavidB CZ | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 29, 2012

1S, GWS 5x3 - enough to hoover my 35g indoor plane

__Zont | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 30, 2012

Receiver 3 of them, 1 did not work, 2 other work fine. IMO price to high for such quality

Bloodyrock | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 18, 2012

good for 50 grams models

Kupfer | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 22, 2012

Amazing power out of 4.6g :-O

With 2S ideal for ~50g Shockflyers.

Lori | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2011

This is a great little motor its so cute. I haven't tested it yet but its quality is good it had a little wire sticking out of the winding but it seems to have disappeared and it comes without connectors. It comes with a motor mount and it dose not include a prop saver so get the one for the "C10 motor" and put some shrink tubing on the shaft and it works great.

Mark S. | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2011

Hi,

I have just measured the AD-C5 3700KV Micro Motor shaft, it is:

The shaft is 1.48 mm / 0.058 inch in diameter.

The motor shaft is 17.14 mm / 0.675 inch total length, from front to back.

There is 6mm / 0.236 inch of useable prop shaft protruding from the front of the motor bell.

The motor shaft is retained on the back (stator) by a small circlip / e-clip (my motor shaft slides easily in the motor bell - will need a thread locker or glue to stop it sliding / rotating)

The motor bell (rotor) diameter is 13.88 mm / 0.546 inch

9.95 mm / 0.392 inch from rear mounting face to front face (front face / prop hub - just a small flat 'locator ring' surface 4 mm / 0.158 inch diameter by 1mm deep)

The three motor wires are very fine, extensions of the motor windings, the length is 42 mm / 1.65 inch heat shrinked and 47 mm / 1.85 inch total length.

The weight including the motor wires is: 4.4 gram / 0.155 ounce.

Hope it helps,
Have Fun !

Mark S.

TheOne420 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 20, 2011

with the little 3x2 prop this little guy screams. its like a a little ducted prop the way i have it set up its cute :)

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Klantbestanden
AD-C5 Micro Motor 4.6g 3700Kv Download [47]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!