Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren

Afro ESC 30amp OPTO Multi-rotor Motor Speed ​​Controller (SimonK Firmware)

Afro ESC 30amp OPTO Multi-rotor Motor Speed ​​Controller (SimonK Firmware)

Now save bewaar € 1,52 € 1,52

Special Price € 10,02 € 10,02

You save bewaar € 1,52 € 1,52

Was  € 11,54

Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
50 g
SKU:
9192000213-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Ontwikkeld van de grond af, wilden we een echt multi-rotor specifieke ESC dat de beste prestaties en waarde in de markt van vandaag zou bieden op te bouwen. We veegde de lei schoon en keek naar de community voor inspiratie en hulp bij het ontwerpen van een ESC die echt kan worden bekend als "De Multi-rotor ESC"

Voer Simon en Hamasaki AKA SimonK en Timecop. Deze combinatie van hardware en firmware expertise in combinatie met de Hobbyking in huis engineering team gaf ons de rand die nodig is om een ​​ESC als geen ander en daarmee de Afro-serie werd geboren te ontwikkelen.

Biedt een hoog rendement, zijn alle N-kanaal MOSFET ontwerp, jitter-free hardware PWM-ingang, en soepel vermogen de reactie van de Afro ESC serie ingesteld op de verwachtingen van de multi-rotor piloten over de hele wereld te veranderen. De Afro ESC-serie worden geleverd met multi-rotor specifieke SimonK software voorgeladen! Geen behoefte om reflash. Voor extra gemak de Turnigy USB linker kan worden gebruikt via het PWM-signaal leiding voor eventuele toekomstige software-updates waardoor de noodzaak voor gecompliceerde knipperen jigs of de noodzaak om opengesneden de krimpkous.

Mikrokopter I2C-compatibiliteit is ook standaard ingebouwd. Een doe-het-poort is beschikbaar onder de krimpfolie die het mogelijk maakt met behulp van de ESC met Mikrokopter hardware die I2C controle gebruikt.

Nu Verzenden met OneShot125.
Sommige voorraden kunnen eisen dat ESC knipperen om OneShot125 via flash hulpmiddel wordt verwezen in de gerelateerde items

specs:
Stroomverbruik: 30A Continue
Voltage Range: 2-6S LiPoly
BEC: N / A - OPTO
Input Freq: 1KHz
Firmware: afro_nfet.hex
Discharge draad / pluggen: 15AWG / Male 3.5mm
Motor draad / pluggen: 16AWG / Vrouw 3.5mm
Gewicht: 26,5 g (Inclusief draad, stekker, krimpkous)
Afmetingen: 50 x 25 x 11mm

Royalty's betaald over elk verkocht aan SimonK en Hamasaki voor hun ontwerp werk-eenheid, zonder welke de Afro ESC zou nooit zijn geboren, bedankt jongens!

Product
Specifications

Aanvullende Informatie

  • Sku:
    9192000213-0
  • Brand:
    Nee
  • Gewicht ( g)
    50.00
  • Lengte
    100.00
  • Breedte:
    20.00
  • Hoogte:
    60.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Best ESC I’ve used.
Works straight out of the packet, no flashing or calibrating wide and smooth range of throttle operation.
Great product HK definitely getting more.
Quality
Value
Overall
Quality
Value
Overall
Great value and well working 30a esc. I had no issues with this, although I did change the firmware from from SimonK to BLHeli. I found that the esc ran the motors much smoother, but still worked fine on both sets of firmware. The esc is fairly wide, so mounting this was a little difficult on a tight frame, especially compared to some of the new esc's on the market but these work great, especially for a larger copter than can accomodate the size.
Quality
Value
Overall
Quality
Value
Overall
top produkt easy to program with usb linke
Quality
Value
Overall
Quality
Value
Overall
Bought 4 of them, using for a multirotor.The have NO HEATSINK on it an should handle 30A, as labeled...NEVER!..sorry the will burn down at the max current in a few minute.First i placed a heatsink on them,much,much better.Second thing, they selled as " with Optocoupler"..also NOT, measured the hole pcb, there is a galvanik contact from the input of the PPM-Signal(orange wire) to the controller ..below 1k..this shouldn't be.If you modify it with heatsink it's useable but i will make long duration test( around 15Min.) at 50pcnt power, if it handles, it's okay.Overall a max. of 3Crowns, cause of the missing Heatsink and no optical input.
Quality
Value
Overall
Quality
Value
Overall
Worked flawlessly, as to be expected of AFRO ESCs.
Quality
Value
Overall
Quality
Value
Overall
Also Bisher kann ich keine auffllikeiten feststellen !!!

Sind sehr gut verarbeitet und machen ordentlich druck :-D

Ganz klare Kaufempfehlung !!!
Quality
Value
Overall
Quality
Value
Overall
These ESC fit perfectly in my Quanum XJ470 folding chassis. I have found they work very well after proper set up. Also note these do not have a built in BEC so you will need a power control board or if using in a fixed wing plane an external BEC. I own 2 quads with Afro ESC and have had no problems with them.
Quality
Value
Overall
Quality
Value
Overall
Initial impressions of this were good, smaller and lighter than my emax escs and the solder looks top notch. Plugged in, cal'd, and flew, these things don't get anywhere near as warm as my other 25a escs. Maybe because it doesn't have the bec but I am quite pleased. Tested the battery cutoff and it's like they were wirelessly connected because the quad just came down gently.

Note it did not flip and fall and break everything like my other escs would, just sayin.
Quality
Value
Overall
Quality
Value
Overall
The Best ESC at affordable price.With USB tool for future upgrading firmware.
Quality
Value
Overall
Quality
Value
Overall
Very Nice ! - flashed with Blheli 14.0 just for the heli of it - enabled oneshot but forgot about setting PWM Damped Light braking. Using on FPVReconn 270mm, 4S, Cobra 2100KV, 6x4.5 - Wow! Impress your friends :>) These ESC's don't even get warm! Also recently purchased the Afro 20 Opto Race...those are great too, and I remembered active breaking - Warpquad is going to be a blast.

Oh..just use the orange signal wire to the naze32 and cut back the black ground - measured 0-ohms from black to black on esc - have not had any signal problems using this method.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.