Alloy Oleo Straight Twin Wheel Nose Been Strut 75mm (1 st)

• Overall
• Quality
• Value

Shiny Finish but...

Feb 17, 2022

The spring inside is much too stiff for a 4Kg plane. I fixed that unwanted effect with removing the spring and cutting 2-3windings off. On my rough grass field the whole mechanics started to wobble more and more after some starts and landngs. The gap where you fix the leg and the spring with a small grub screw is worn out too quick which has the effect that the whole leg is twisting slightly in both directions, left and right. Thats why straight starts get more and mor difficult. The grub screws to mount the legs on the pin do not hold tight. you must use normal M3 Hex screws to fasten them tight otgherwise the twist from beginning. This is an oles for a straight asphalt ground but not for grass.

• Overall
• Quality
• Value

Alloy Nose Wheel Strut leg 75mm

Nov 10, 2021

High quality and robust strut leg. Designed for twin nose wheels, but can be simply converted to single wheel. Also can be used as a main wheel leg. Used 4 on a Handley Page O/400 for scale effect, look great.

• Overall
• Quality
• Value

Alloy nose wheel strut

Sep 30, 2021

Well made and scale looking nose wheel strut. Adds that special look to a scalie

• Overall
• Quality
• Value

Short strut

Nov 03, 2019

It is too hard on spring, need to be more softer than one that I have is hard spring. I am looking for softer spring to replace it.

• Overall
• Quality
• Value

Best 75mm leg available!

Mar 16, 2017

First class oleo leg nice and short! Can be used for single or dual main wheel as well as nose gear with dual wheels.