New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Aluminium Quick Release Self-Aanscherping Prop Adapter Set - 1 x 1 x CW CCW

Aluminium Quick Release Self-Aanscherping Prop Adapter Set - 1 x 1 x CW CCW

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 8,18
status:
Backorder
Gewicht:
36 g
SKU:
017000374-0
WANT FREE SHIPPING? Click here to find out more!

Ben je moe van het verwijderen van uw propellers aan uw multirotor vervoeren, alleen maar om meer tijd door te brengen om ze weer op wanneer je moet vliegen? Nu is er een eenvoudiger manier. zelfspannende quick release prop adapters.

Nooit meer breken propellers tijdens transport en minder frustratie met een snelle en eenvoudige installatie. Deze set bestaat uit één stuk, CW en CCW rotatie welke kleur gecodeerd voor gemakkelijke identificatie zijn.

Gewoon monteren uw prop de adapter en de basis om uw motor en met een snelle beweging van de prop zal zich draad op.

Vervoer en opslag van uw multirotor kan niet eenvoudiger.

specs:
Gewicht: 13,5 g per stuk (incl bevestigingsbouten)
Prop Shaft: 6mm
Motor As Gat: 4mm
Montage Hole Diameter: 12mm (4-punts Mount)
Self-Aanscherping Richting: 1 x de klok mee (rood) 1 x tegen de klok in (zwart)

Bouten en inbussleutel inbegrepen.

  • Sku 017000374-0
  • Brand Unknown
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 36.00
  • Lengte 45.00
  • Breedte 25.00
  • Hoogte 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i purchased these to replace a broken prop adapter. they seemed very nice at first, but on the third flight during a manuver at about 50 meters, two of the props flew off the quad copter due to a quick change in speed of the motors, resulting in a crash. very difficult to tighten enough so that they don't unwind during sudden motor speed changes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i purchased these to replace a broken prop adapter. they seemed very nice at first, but on the third flight during a manuver at about 50 meters, two of the props flew off the quad copter due to a quick change in speed of the motors, resulting in a crash. very difficult to tighten enough so that they don't unwind during sudden motor speed changes.

Well I purchased these for my quadcopter and the first thing to note is these adaptors are missing corrugation where the prop itself sits on. They are smooth so you have to really tighten down the prop to get it from spinning freely. Second there is no way to hold onto the top adaptor to screw down the nut that tightens the prop down. Basically your trying to grip the round plate as tight as you can so you can even tighten down the prop. The last and major issue with these adapters is they fail very quickly. I had my quad only 5 feet off the ground fortunately but the top adapter on one of the motors sheered in half, so that prop basically just fell off and the quad crashed to the ground. I think the reason it sheared off is because the material is extremely thin, you can look at the aluminum and see there is barely any material holding the prop mounting post to the actual base plate.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well I purchased these for my quadcopter and the first thing to note is these adaptors are missing corrugation where the prop itself sits on. They are smooth so you have to really tighten down the prop to get it from spinning freely. Second there is no way to hold onto the top adaptor to screw down the nut that tightens the prop down. Basically your trying to grip the round plate as tight as you can so you can even tighten down the prop. The last and major issue with these adapters is they fail very quickly. I had my quad only 5 feet off the ground fortunately but the top adapter on one of the motors sheered in half, so that prop basically just fell off and the quad crashed to the ground. I think the reason it sheared off is because the material is extremely thin, you can look at the aluminum and see there is barely any material holding the prop mounting post to the actual base plate.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!