Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

BA BL1230 4200kv borstelloze Inrunner Motor

BA BL1230 4200kv borstelloze Inrunner Motor

QTY:

Now save bewaar € 0,00 € 0,00

€ 10,55
Stock:
Gewicht:
35 g
SKU:
BA-BL1230

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

BA BL1230 4200kv borstelloze Inrunner Motor
Kv4200
Weeg: 13g (0.46 oz)
Afmetingen: 12mm x 30mm (0.47in x 1.18in)
Shaft diameter: 1,5 mm (0.059in)
Fase: 3
Pole: 2
Resistance: 1.00Ù
Inductance: 0.024mH
Onbelast Current: 0.4A
Laad Current: 6A
Turn: 20

Product
Specifications

Aanvullende Informatie

  • Sku:
    BA-BL1230
  • Brand:
    Nvt
  • Gewicht ( g)
    35.00
  • Lengte
    90.00
  • Breedte:
    15.00
  • Hoogte:
    70.00
  • Kv ( tpm / v )
    4200.00
  • Max Currents (A )
    0.00
  • Vermogen ( W):
    0.00
  • Lengte B ( mm ):
    30.00
  • Kan Lengte D ( mm )
    29.00
  • Max Voltage ( V )
    0.00
  • Shaft A ( mm ):
    1.00
  • Unit Weight (g):
    13
  • C Diameter ( mm )
    12.00
  • Totale lengte E ( mm )
    36.00
  • Resistance ( mh ):
    1.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Fits my losi micro crawler perfect. Has about the same speed as the stock motor but about 6 times the torqure. I can get almost no motor heat running it full bore on a 2 cell lipo on a 10A ESC. Two thumbs up for sure. Motor wires are a bit long and thin but I'm sure that's to save on weight. Longer run times too.
Quality
Value
Overall
Quality
Value
Overall
Works killer in my losi micro crawler. Has way better torqe and amazing throttle control at low speed. Its about the same speed as the stock motor to. You will have to drill out a different hole on the motor mount but that's it. Fits great and I have no heat issues at all with a 2 cell lipo on a ten amp ESC. Overall its working great so far and I can see it working good for years to come.
Quality
Value
Overall
Quality
Value
Overall
tinky, neat and hot Motor. Sweet
Quality
Value
Overall
Quality
Value
Overall
I got this after my losi micro sct 1/24 brushless motor died 3 different times (warranty). It's been a strong little motor. Had to drill two holes in the motor mount and moved the on/off switch to the top. It's slightly longer by 10mm.
Quality
Value
Overall
Quality
Value
Overall
Small and very fast. It is very qualitatively made.

For small models that is necessary.

7-12 volt perfectly works.

To all I recommend.
Quality
Value
Overall
Quality
Value
Overall
Great little motor - using this on a Eagle 50 (aka Walkera 22e) direct drive tail with a Esky Tail Blade Set 002386.
The tail balde is the same as the BLADE EFLH1321, GWS 3x2 prop and also the HCB-03 from HobbyKing. I got a
BLADE EFLH1321 mount and flipped it 180 so the the air flow is across the motor and with the addition of a heat
sink the motor runs much cooler. I paired it with a Tz12A HobbyKing 12A BlueSeries brushless controller plugged into
a walkera RX-2609 receiver that had the gyro mod (gyro board removed and gyro-sense jumper to AUX2). Make sure you
get the blade on the right way, it does not work as well when running backwards. Ask me how I know... Also it uses
M1.6 mounting screws and it does not come with them and hk does not carry em either.
Quality
Value
Overall
Quality
Value
Overall
Can this be used in the Parrot AR.Drone x 4 as an upgrade? Has anyone used these motors in this application? Stock motor is 3500kv this would increase power output/consumption, but will it work with onboard computer/esc profiles......I will order 1 to find out, the replacement from Parrot = 70.00us$, if your esc is still good this is 15.00 plus ship or 60.00 for all 4 ship......may as well upgrade for the price of one stock motor x4 :)
Quality
Value
Overall
Quality
Value
Overall
Nice little motor used in a Multiplex Fox conversion (motor mounted on Pylon over fuselage) Thrust about 75 gram with GWS style 3x2 prop on a 2s lipo battery. A 3x3 prop loaded it up too much and did not get same level of thrust on 2s.



Quality
Value
Overall
Quality
Value
Overall
Great motor awesome power I have this on my adrenaline rush and it will do aprox 80mph. very durable and reliable as well.
Quality
Value
Overall
Quality
Value
Overall
tres puissant. le shaft est tres court est est tres fragile. il se courbe facilement
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.