Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

BF-109 Racer Glasvezel 1029mm (ARF)

BF-109 Racer Glasvezel 1029mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1708 g
SKU:
ME-10925EPkit

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

Op zoek naar een schaal BF-109? Dit is het niet! Dit BF-109 is gebouwd voor hoge snelheden plezier en beschikt over een mooi afgewerkt, taai composiet romp en een schuim gevulde / balsa dekzeil vleugel die meer zou kijken thuis op een pyloon racer meer dan een schaal warbird!

De 109 Racer is 4-kanaals controle en er is niet de geringste hoop fitting trekt, tenzij je bereid bent om een ​​aantal uitgebreide modding te doen zijn, is fixed gear opgenomen of eigenlijk .... het is een goede oude gooien! Om het beste uit de 109 Racer te krijgen, zul je een hoog vermogen 4s aandrijflijn en veel van de hemel wil zich rond te vervoeren! Je moet ook een aantal 9g ~ 12g servo's voor de lift / roer en een park servo voor de rolroeren. Dit is niet een voor onervaren piloten en een aantal goede ouderwetse elementaire gebouw vaardigheden zou geen kwaad kunnen ofwel gaan, hoewel de montage is vrij eenvoudig. Voor degenen die weten wat ze doen, de BF-109 racer is een krankzinnige hoeveelheid plezier voor een gezonde hoeveelheid geld!

specs:
Spanwijdte: 1029mm
Lengte: 760mm
Flying Gewicht: 800g ~ 1000g

vereist:
Uw Eigen 4-kanaals TX / RX
3 x 9g ~ 12g servo, 1 x 25g Park servo
60A ESC
64mm Spinner
1200kv ~ 1600kv 28mm In-runner Motor (8 "~ 9" prop)
2200mAh 4s 25C ~ 40C LiPoly Battery

Product
Specifications

Aanvullende Informatie

  • Sku:
    ME-10925EPkit
  • Brand:
    Nee
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    1708.00
  • Lengte:
    740.00
  • Breedte:
    170.00
  • Hoogte
    245.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
great plane, difficult build. Be ready for goofy things like wrong sized bolts and missing parts. If you have most of the parts laying around from other planes then not to big of a deal. you will have to reinforce the front end with fiberglass or something or it will start to break away over time. Not a beginner plane or build.

not trying to scare you. for the price your getting alot of plane. check out the thread. http://www.rcgroups.com/forums/showthread.php?t=1659480
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally maidened mine on the weekend.



Turnigy 36-48, Turnigy 4S NanoTech. Turnigy Plush 60A. APC 8x6 prop.



Screams its lungs and really whistles through the air.



A bit of a handful on takeoff given the high wing loading - and a real brick to land. Difficult to flair, but something I can work on.



Made a short vid - you tube HK BF109 Pylon Racer to see the flight.



BJ:)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received the plane Well packaged and without Any damage after 11 days I requested, I read some comments about the fuselage is fragile but I think is not, my opinion is that the fuselage is of high quality fiber , the wings are built perfectly, I think it's more than I expected to received, the plane is almost ready to fly, the parts are the BASIC ones and it is very easy to assemble. I ordered stickers to vive more realism to my BF-109. I give 5 stars to the plane and the price. Thanks again HOBBY KING

He recibido el avin bien embalado y sin ningn dao despus de 11 das, he ledo algunos comentarios sobre el fuselaje que es frgil pero creo que no es asi, mi opinin es que el fuselaje es de fibra de alta calidad, las alas estn construidas a la perfeccin, creo que es ms de lo que esperaba recibir, el avin est casi listo para volar presenta algo de trabajo pero nada pero nada a los amantes de este modelo, las partes son bsicos y es muy fcil de montar. Ped calcomanias para darle ms realismo a mi BF-109. Le doy 5 estrellas al avion y al precio. Gracias de nuevo HOBBY KING
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Thread started over on RG Groups to discuss this plane in more detail. All comments welcome. Just Google BF-109 Pylon Racer to find it. Looking forward to hearing from you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
PS - the link to the online manual didn't work before, so try hobbyking.com/hobbyking/store/uploads/573478465X7478X19.pdf with the usual bits at the front...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The good, the bad, and the ugly.



Part 2.



Opinion so far:

LOVE the fuse. It grows on you. No idea what motor to run yet, but this thing is worthy of



something that will give it killer speed. And something that could generate that supercharger



whine would be a bonus :)



For the dude asking about CG, the online manual at



http://www.hobbyking.com/hobbyking/store/uploads/573478465X7478X19.pdf says "approx 45mm behind



the leading edge of the wing, measured at the centre of the fuselage".



Question:



I've read elsewhere that the rear stab has a positive angle of incidence. If this is so, do I



need to adjust this - and how do I do it. Before I commit to glueing the tailplane on...??
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ive got this nice bird, too!

Arrived very well packaged and without any damages.

Fuselage, wing and other parts are well manufactured.

However, the fuselage is a bit thin to my liking and during assembly one should be very carefully with the rudder section and not introduce any damage due to hard pressure.

Despite having the rudder functional I sanded it flat and glued it on.

The front of the fuselage was opened just as far as a motor can be dropped in from the front. The motor was attached to a gfk motorplate and secured to the fuselage with a couple screws.

First flight needed just a few trims on the ailerons and this bird goes like on rails! I used a 3s4400 with a NTM 3542-1250 and a 9,5x6 folding prop = more than 7:30 minutes on fullspeed!

Nice kit, but due the thin fuselage only 4 stars, but 5 stars for the value!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought and built. Wings are well covered, fuse is well finished, glass layup is average, but OK for the money. Flight surfaces are square and hinge up well. But my fuse is came slightly warped to left, setting the wings off the perpendicular. So builders, trial fit carefully and assemble with attention to your perpendiculars and wing and tail alignment. Plus wouldn't recommend the 480BL inrunner for this aircraft. The spinner prop combo is too large for a fast inrunner on a 4mm shaft. You'll have better luck with a slower, larger shaft (5mm) outrunner motor and a larger, slower prop setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine has just turned up today ,glass is thin but the layup is clean
packing was excellent and the only damage was a broken leading edge wing locator ,no big thing .No instructions or any information on setup which could make it hard for those not up on setting up or balancing .Mine will be converted for slope so will report how it performs soon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got My Bf 109 Last week and With amazement the Plane is realy Light and can handle a Park1200kv with the specified 18-20 amp Esc ..make this Plane fly Quite well ,and Good flight efficiency using a few Nano tec ,,battery on 11.1 volt , with 2x 8600 mah packed in the Knows behind Motor firewal..,and now thinking about the strength,aftera few spills after landing ,in the grass .as the speedy little Plane performs As a larger plane ,,as Very Fast and Very sleek ,with great look and handles as it looks ,,amazing .., Quite a treat ,And every 1 at the club was amazed to the quality .all round excellence,from a small plane with Great strength and detail.. Video i will post Asp..
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.