Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Bixler® ™ v1.1 EPO 1400mm (RTF Mode 1 Throttle Right Radio)

Bixler® ™ v1.1 EPO 1400mm (RTF Mode 1 Throttle Right Radio)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2533 g
SKU:
HK-SS-RTFM1

Combine

essential items and
battery
acc
Product
Omschrijving

Op zoek naar een kant en klaar om te vliegen trainer? of een in-dure FPV platform? Misschien bent u een club piloot op zoek naar iets wat je kunt gewoon trek uit de auto en vliegen op een van die luie zondagmiddag? De Hobbyking® ™ Bixler® ™ tikt al die dozen en nog veel meer!

De Bixler® ™ heeft alle juiste ingrediënten, gemaakt van super stoer EPO foam, alles is vooraf geïnstalleerd, zodat een minimale montage tijd nodig is, in feite, tegen de tijd dat u de meegeleverde batterij met de bijgeleverde oplader opgeladen, moet het klaar zijn vliegen!

Stop Druk !!


Sta ons toe om de Bixler® ™ V1.1 te introduceren met een groot aantal verbeteringen ten opzichte van de oorspronkelijke Bixler® ™.
Onze v1.1 functies verplaatst en hoogteroer servo nu dichter bij de staart en via een magnetische luik aan de onderzijde van de romp. Waarom? kun je je afvragen - Dit maakt het mogelijk veel meer bruikbare ruimte in het voorste gedeelte van de romp, iets dat FPV'ers gaan om ons te bedanken voor! We hebben ook een nieuwe hardware inbegrepen om betere kwaliteit componenten, zoals de nieuwe 4 bout roerhoornen op alle oppervlakken omvatten. We hebben ook 2 verschillende propellers, een voor de hoge snelheid en de andere voor het dragen van zwaardere ladingen.
U - onze klanten spraken, we geluisterd! Het eindresultaat is de Bixler® ™ V1.1!


Volledige 4-kanaals controle is een must voor nieuwe piloten en ervaren piloten op elkaar en de meegeleverde 2,4 GHz, en 6-kanaals receiver combo is uitgerust met tal van functies, waaronder een reeks testknop voor de vrede van de geest, een mix faciliteit, servo omkeren en een trainer poort!

specs:
Materiaal: EPO Foam
Spanwijdte: 1400mm
Lengte: 925mm
Wing Gebied: 26dm2
Wing Loading: 25 g / dm2
Flying Gewicht: 650g
Motor: 2620-1900kv Brushless Outrunner
ESC: 20A w / BEC
Servo: 4 x 9g

inclusief:
2.4ghz Radio (Modus 1 - Throttle rechts, 4 Channel) & 6 kanaals ontvanger
1300mAh ~ 2200mAh 3s LiPoly Battery
2s & 3s LiPoly Battery Balance Charger (12v Operation)
verbeterde hardware
2 x Propellers (5.25x4.75 en 6x4)

vereist:
8 x AA droge cel batterij voor TX
Foam Glue of Med ~ Dikke Cyno met Activator

Product
Specifications

Aanvullende Informatie

  • Sku:
    HK-SS-RTFM1
  • Brand:
    Nvt
  • Gewicht ( g)
    2533.00
  • Lengte
    970.00
  • Breedte:
    175.00
  • Hoogte:
    230.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
perfect for cheap fpv and beginer plane to practice with just hve to get used to trotlle on the right
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first plane. Received the package in about a week from the USA Warehouse. Package was received in great shape but am missing eight (8) of the little control part screws (should have received a total of 16... 4 control horns X 4 screws). I'm going round and round with Hobby King's lackluster customer service dept... they want me to weigh and photograph the entire kit. I don't own a scale or know anyone who does. Maybe Hobby King can send me a scale?? I sent a photo of the screws but all I get are the "standard" directions to weigh all the parts, packaging, etc, with a scale accurate to /- 5 grams. The tiny screws probably weigh less than a gram anyway so how would it be detected by a /- 5 gram scale?? I'm very happy with the plane's appearance and ease of assembly but don't think I'll buy anything from Hobby King again... not worth the headache. Better off finding a local hobby shop and paying a few extra bucks for customer satisfaction and support. All this over 8 screws worth less than $2.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Lovin the bixler as my first RC fixed Wing. Apart from a mishap with my maiden flight (had the elevator channel reversed break out the glue) Apart from this minor mishap the Bix 1.1 crack along nicely. So far had a 30 minute flight gliding about on the supplied 1800mah Battery. The only thing that I'd advise is to port the fuselage otherwise the ESC heats up and the lipo gets a bit warm. Apart from that this is a great buy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An easy p&f model. Mine arrived in good condition, assembled easily and was ready to fly in rapid time. BE CAREFUL the adhesive on all of the pre-fitted aileron horns etc did not hold at all. A quick fix is to cut a small square of ice-cream container plastic cover as a backing plate for each horn (colour coordinated of course!!). Drill a pilot through in 2 places on each horn, one front ,one back. Attach screws thru from the horn side and make sure they come through the plastic squares on the top-side. Use the finest screw you have (you can buy them cheaply here at HK) I would recommend doing this on any pre-installed horn on any model control surface....great insurance. Then you can enjoy the flying fun to come!! Bixler is a beaut teaching and learning airplane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is very good, easy to fly, crashed it once and only the canopy came off. awesome plane for beginners that are getting into flying. Easy to build! I run my 2200mah 20 c 3s lipoly battery and it goes really well. This battery will only fit if you take out the weights in the front of the plane. Also great for fpv! good on you HK! :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good:
Comes 90pcnt assembled.
You can dissasamble it for transportation.
Control is very simple.
You can fix it after almost every crash with reinforced tape and some toothsticks.
bad:
Radio is not perfect, i was lost control 3 times and plane was not more than 1km distance.
Main wing rod very thick and broke after 2 crashes, so i replaced it with alu rod.
Control surfaces mounts without hinges, so you must buy some to fix them after crash.
Prop is very thick and cant give you much power, so replace it as fast as you can.
PS: buy another one in kit version (like i do) to fix your great bixler.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
HI GUYS, Ihave had my BIXLER for about a month now and boy what a pleasure it is. I have set mine up with a 30amp esc and run a 3s 2000ma battery. Iclimb up to abouy 500 feet cut the throtle trim the glide speed back to about 5 knots above the stall. In this configuration it takes about 12 minutes to come down even with no thermals.I have had flights up to nearly one hour from one battery. You have to feel sorry for any modeler who hasn"t got one of these. HAPPY FLYING regards JOHN R.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I glued the model together with Epoxy as some types of glue eat into the foam. It is well formed and I am looking foward to flying it when the weather improves.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to set up. Quite easy to fly. After 5 charges of the battery, the charger died. (red light on and green light flashes constantly) Picked up a new AC charger from a local hobby shop for $30.



Today from about 30 meters up, I managed to nose dive it into the ground. The LHS snapped from the front to the wing area but the rest of the plane survived. Have glued it all back together and taped it up and its good to go again!! Doesn't look as pretty though.



Good cheap fun!! Reccommended



Can we have spare parts in the AUS Factory please?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Came to me damaged with a wing edge cracked, easily fixed. Parcel was in mint good condition. Assembly manual really basic and was impossible to assemble using the information in the manual. As someone entering RC, I had to look online at which way the control horns go, how its wired and such. HK sent me a left handed radio despite ordering this right handed version.

Stock ESC (Speed Controller) heats up with regular flying with the stock setup. Washers in the nose are on the left increasing torque roll despite me mounting everything on the right hand side of the plane.

Easy to fit, rudder and elevator go into position at 90 degrees perfectly. Wings should have Velcro or magnets to hold them together instead of having to glue them in.

Carbon fiber tube in wings is flimsy, get a good 5mm ROD, not tube. Very easy to fly, elevator has too much control even with lowest throws.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Bixler® ™ v1.1 EPO 1400mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.