Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

BLS-1004 High Voltage (7.4V) Brushless Digital Servo w / Nanometer Alloy Gear 9.7kg / .048sec / 66g

Generating Links

BLS-1004 High Voltage (7.4V) Brushless Digital Servo w / Nanometer Alloy Gear 9.7kg / .048sec / 66g

Prijs:

Now save bespaar € 0,00 € 0,00

€ 51,13
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
122000018-0
Geen verzendkosten? Klik hier meer leren!

De BLS-1004 is een High Voltage (7.4V) Coreless Digital Servo met Nanometer legering versnellingen en een Alu koellichaam geval. De BLS-1004 is voorzien van een heavy duty servo set.

Kenmerken:
• Dubbele kogellager (Si-olie)
• Japanse borstelloze motor beoordeeld voor hoogspanning tot 2S LiPoly
• Alloy heatsink ontwerp
• Digitale signaal ontwerp met 100% fit vierkante PWS
• Automatische maatregelen centrale ms
• Digitale IC (SOP-pakket met 12bits data-overdracht)
• MOS-FET driver (pittige bestuurder in staat om te duwen meer dan 7A vermogen)
• Nanometer legering versnellingen
• O-ring afgesloten case

Specificatie:
Gewicht: 66 gram
Afmetingen: 40,5 x 20 x 39 mm
Torque @ 6V: 7.4 kg / cm
Torque @ 7.4V: 9,7 kg / cm
Snelheid @ 6V: 0.055sec / 60 deg onbelast
Snelheid @ 7.4V: 0.048sec / 60 deg onbelast
Voltage Range: 6 ~ 7.4V

  • Servo Torque ( kg) ( min . 0,01 kg ) 9.70
  • Servo Snelheid ( Sec / 60deg ) 0.04
  • Servo A ( mm ) 43.00
  • Servo B ( mm ) 41.00
  • Servo C ( mm ) 39.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm ) 54.00
  • Servo F ( mm ) 28.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Dennis | Geverifieerde koper

  • Overall
  • Value
  • Quality

Needs HV battery

May 16, 2018

The jitters were overcome when using 6.6v Life battery packs instead of 6v Nimh. Must have been a voltage issue.

DeeBee | Geverifieerde koper

  • Overall
  • Value
  • Quality

Some jitters

Jun 21, 2017

I have 4 of these but there is a problem and only 1 can be used in a set up. They create some sort of electronic noise and jitter when other channels on the radio are used. The issue was on both FrSky and Orange DMSX receivers. Ferrite coils on the leads make no difference. Otherwise solid servo.

DeeBee | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Feb 25, 2016

I have bought 2 of these and they test well.
Nice smooth tight gear train, quiet and very quick. Centering is spot on.
They appear well built with very heavy duty plastic control horns.
Not too heavy for brushless standard servos. I expect good things from them.

marteau | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Dec 10, 2015

Trs bon servo rapide puissant et fiable je l ai mont sur un t700 l ac trs agreablement surpris mme en 3d appuy il tiens vraiment aussi bien que d autre servo haut de gamme ; frquence de 200hz il ne chauffe pas du tout et fait le boulot je le conseil trs fortement

Peter | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Nov 04, 2015

Best servo company there is. Excellent quality products that match or exceed any other. I use this servo as the throttle servo for all my gas planes. From 30cc to 100cc.

skyfox60 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 14, 2015

This servo is build of very high precision. No gear play, very fast. Cable is secured inside on PCB. PCB itself of high manufacturing quality. Housing also very precise. I use this as a tail servo in a HK 600GT. Will come back after a number of flight to report the durability. But as of now, I am very happy with the quality. Tested it so far on a servo tester and in a HV setup with a FBL system at 8,4V. Servo seems to be absolutely worth the money. Worthy screws and fine machined outside, extremely fast with good resolution. Holds the tail rock solid. 2 flights so far, will come back after 50 or 100 flights to report durability but I think that will not be a problem at all.

Davide79 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jun 28, 2015

I used this on gas of my Slick 540 35 gasoline..this servo is really fast and have a perfect centering!!! Very very happy with this gas set up...my finger is too slow for it!!!

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires