Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

BMS-306 Micro Servo 0.8kg / .11sec / 6g

Generating Links

BMS-306 Micro Servo 0.8kg / .11sec / 6g

Prijs:

Now save bespaar € 0,00 € 0,00

€ 15,54
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
BMS-306
Geen verzendkosten? Klik hier meer leren!
BMS-306 Micro Servo 0.8kg / .11sec / 6,2 g
Gewicht: 6 gram / 0.21oz
Afmetingen: 22 x 10 x 23 mm / 0,86 x 0,4 x 0,9 inch
Koppel bij 4.8V: 0,8 kg / cm, 12 oz / in
Snelheid Bij 4.8V: 0.11 sec / 60 deg onbelast
  • Servo Torque ( kg) ( min . 0,01 kg ) 0.80
  • Servo Snelheid ( Sec / 60deg ) 0.11
  • Servo A ( mm ) 27.00
  • Servo B ( mm ) 24.00
  • Servo C ( mm ) 24.00
  • Servo D ( mm ) 11.00
  • Servo E ( mm ) 32.00
  • Servo F ( mm ) 14.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Tommy | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Apr 02, 2012

Bought four, one had strange noise with a little jittering but all worked. Good centering and good resolution. They are really slow in cold weather compared to cheaper servos. Stripped one when landing my Reaktor. Can recommend for indoor or in warm climate, will try the HXT500 next...

Zoran | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 07, 2011

Nice looking servo! The problem is that it lasted 15 minutes (while I was setting the plane).
Today I was waiting for spot to take off, controls were working fine. A few minutes later when the spot was available I was ready to take off, checked controls again-no rudder!! I am using 5V BEC and servo was controlling a rudder on a 200g plane, everything moves freely.
Having in mind that this is my first servo failure of that nature in over thirty years, I should consider myself lucky!

dexerit | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 02, 2011

Je me sert de ces servos dans mon blaster 2...

Retour au neutre tip-top, costaud...!!!

soptik | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 21, 2011

Works great. Same as Waypoint 60. But I bought aproximately 20pc till these days and 1pc was wrong with bad moving (non repairable) and 1pc was blocked inside box and it was easy to repair it

Eric | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Mar 06, 2011

Excellent servo. Pas la peine de se ruiner avec les EP6 de Donuts.
A 8.84$ pice (pour les membres Platinium'), c'est juste 2 fois moins cher. Foncez !

kavic5150 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 10, 2010

Excellent cyclic servos for my gaui 200. Plenty fast with a low current draw and cool/cold to the touch after a 7+ minute flight on 3s 800-1000mah noob 3d/fast forward flight in idle up w/70-51-40-51-70 throttle curve.

fghfgjfsj | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 03, 2010

trs bon servo, idem au ep 6 utiliser par la plupart des comptiteurs f3p et f3k, le top !

Klant | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 05, 2010

Compare to HXT500, this servo provies

-Good resolution

-Smooth operation

-Good centering

-Longer potentiometer life

-a bit more $

-Slightly heaver side for 5oz ish foamy

Highly recommended, overall.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 25, 2010

sehr gutes und genaues servo!!!

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 16, 2010

SERVO MUITO LEVE E ATENDE MUITO BEM PARA FUNO QUE APLIQUEI

  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!